Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 416-1:2009-09

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
Available format(s)

Hardcopy , PDF

Superseded date

07-03-2021

Language(s)

English

Published date

01-01-2009

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
  3.1 Geräte und ihre Bestandteile
  3.2 Verbrennungskreis
  3.3 Einstell-, Regelglieder und
      Sicherheitseinrichtungen
  3.4 Betrieb des Gerätes
  3.5 Gase
  3.6 Betriebs- und Messbedingungen
  3.7 Bestimmungsland
4 Klasseneinteilung der Geräte
  4.1 Klasseneinteilung nach der Art der
      verwendeten Gase (Kategorien)
  4.2 Klasseneinteilung nach Gasen, die
      verwendet werden können
  4.3 Klasseneinteilung nach der Art der
      Abgasabführung
5 Bau- und Konstruktionsanforderungen
  5.1 Allgemeines
  5.2 Anforderungen an Einstell-, Regel- und
      Sicherheitseinrichtungen
  5.3 Zündeinrichtungen
  5.4 Hauptbrenner
  5.5 Druckmessstutzen
  5.6 Düsen
6 Betriebsanforderungen
  6.1 Dichtheit
  6.2 Wärmebelastungen
  6.3 Grenztemperaturen
  6.4 Zündung, Überzünden und
      Flammenstabilität
  6.5 Gasdruckregler
  6.6 Verbrennung
  6.7 Dauerprüfung
  6.8 Messung von Stickoxiden (NO[x])
7 Prüfverfahren
  7.1 Allgemeines
  7.2 Bau und Konstruktion
  7.3 Betriebssicherheit
  7.4 Andere Schadstoffe
8 Kennzeichnung und Anleitungen
  8.1 Kennzeichnung des Gerätes und der
      Verpackung
  8.2 Anleitungen
  8.3 Präsentation
9 Konformitätsbewertung von
  POCEDs-Abgasabführungsleitungen und ihren
  dazugehörenden Windschutzeinrichtungen
  9.1 Allgemeines
  9.2 Typprüfung
  9.3 Werkseigene Produktionskontrolle (FPC)
Anhang A (informativ) Nationale Situationen
          A.1 Allgemeines
          A.2 In den verschiedenen Ländern
               vertriebene Kategorien
          A.3 Geräteanschlussdrücke entsprechend den
               in A.2 angegebenen Kategorien
          A.4 Spezielle Kategorien, die national oder
               örtlich vertrieben werden
          A.5 Prüfgase zu den in A.4 genannten
               besonderen Kategorien
          A.6 In den verschiedenen Ländern übliche
               Gasanschlussverbindungen
          A.7 Abgasanschlüsse in den verschiedenen
               Ländern
Anhang B (normativ) Gerätearten (eingeteilt nach
          Abgasabführung)
          B.1 Geräte der Bauart B mit einem Gebläse
               in der Abgasanlage
          B.2 Geräte des Typs C mit einem Ventilator
               im Verbrennungskreislauf
Anhang C (informativ) Bestimmungen zur Äquivalenz
          C.1 Umrüstung auf Kategorien innerhalb
               eines eingeschränkten Wobbeindexbereiches
          C.2 Umrüstung auf Kategorien mit
               identischem Wobbeindexbereich
          C.3 Umrüstung auf Kategorien mit einem
               grösseren Wobbeindexbereich
Anhang D (informativ) Berechnung des Abgasmassenstromes
          D.1 Abgasmassenstrom
          D.2 Luftmenge im Abgas
          D.3 Luftüberschuss im Abgas (lambda)
          D.4 Wasserdampf im Abgas
          D.5 Stickstoff im Abgas
          D.6 Sauerstoff im Abgas
          D.7 Trockene Abgasmenge
          D.8 Kohlenstoffdioxid im Abgas
Anhang E (informativ) Kennzeichnung von Gasarten,
          die in den verschiedenen Ländern vorhanden sind
Anhang F (normativ) Besondere nationale Bedingungen
          F.1 Allgemeines
Anhang G (informativ) Berechnungsbeispiel von den
          Wichtungsfaktoren eines Stufengerätes
          G.1 Gerätestufen:
          G.2 Wichtung von Q[pi,%] = 20
          G.3 Wichtung von Q[pi,%] = 40
          G.4 Wichtung von Q[pi,%] = 60
          G.5 Wichtung von Q[pi,%] = 70
          G.6 Gesamte Wichtung
Anhang H (informativ) Berechnung der Konversion von NO[x]
          H.1 NOx-Faktoren der Emission der Konversion
          H.2 NOx-Berechnung der Konversion
Anhang I (informativ) Nationale Lösungen für Länder,
          deren nationale Behörden angeschlossene
          CEN-Mitglieder sind
Anhang J (informativ) Ein Beispiel für Stichprobenpläne
          J.1 Stichprobenpläne
          J.2 Prüfniveaus und Verfahrensweisen
Anhang K (informativ) Bestimmung der Abgasverluste
          K.1 Allgemeine Prüfbedingungen
          K.2 Prüfbedingungen
          K.3 Durchführung
          K.4 Messgenauigkeit
          K.5 Berechnung der Abgasverluste
Anhang ZA (informativ) Zusammenhang zwischen dieser
          Europäischen Norm und den grundlegenden
          Anforderungen der EG-Richtlinie 90/396/EWG
          - Annäherung der Gesetze der Mitgliedstaaten
          betreffend Gasgeräterichtlinie
Anhang ZB (informativ) Abschnitte dieser Europäischen
          Norm, die Bestimmungen der EG-Bauproduktenrichtlinie
          betreffen
          ZB.1 Anwendungsbereich und massgebende
               Eigenschaften
          ZB.2 Verfahren für die Bestätigung der
               Übereinstimmung von Bauprodukten
          ZB.3 CE-Kennzeichnung und Etikettierung

Describes the requirements and test methods for the construction, safety, classification and marking of non-domestic gas fired overhead radiant tube heaters incorporating a single burner system under the control of an automatic burner control system, referred to in the body of the text as 'appliances'.

DocumentType
Standard
Pages
130
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded

Standards Relationship
NF EN 416-1 : 2009 Identical
NBN EN 416-1 : 2009 Identical
NEN EN 416-1 : 2009 Identical
NS EN 416-1 : 2009 Identical
I.S. EN 416-1:2009 Identical
SN EN 416-1 : 2009 Identical
UNI EN 416-1 : 2009 Identical
BS EN 416-1:2009 Identical
EN 416-1:2009 Identical
UNE-EN 416-1:2009 Identical

ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
ISO 274:1975 Copper tubes of circular section — Dimensions
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN 60584-2:1993 Thermocouples - Part 2: Tolerances
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN 13410:2001/AC:2002 GAS-FIRED OVERHEAD RADIANT HEATERS - VENTILATION REQUIREMENTS FOR NON-DOMESTIC PREMISES
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
EN 126:2012 Multifunctional controls for gas burning appliances
EN 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 60730-2-1 : 97 AMD 11 2005 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 257:2010 Mechanical thermostats for gas-burning appliances

View more information
$485.34
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more