DIN EN 50298 : 1999

Name: DIN EN 50298 : 1999
Brand: DIN

Superseded

View Superseded by

EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS

Superseded date

01-04-2005

Published date

12-01-2013

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

1 Allgemeines
  1.1 Anwendungsbereich und Zweck
  1.2 Normative Verweisungen
2 Begriffe
  2.1 Leergehäuse
  2.2 Geschützter Raum
  2.3 Verkleidung
  2.4 Tür
  2.5 Einbauplatte
  2.6 Kabeleinführungsplatte
  2.7 Deckel
  2.8 Gehäusehersteller
  2.9 Kasten
  2.10 Schrank
3 Einteilung
  3.1 Gehäusewerkstoff
  3.2 Befestigungsart
  3.3 Aufstellungsort
  3.4 Schutzart
  3.5 Bemessungsisolationsspannung (für Gehäuse aus
       Isolierstoff)
4 EMV-Anforderungen
5 Angaben zum Gehäuse
  5.1 Aufschriften
  5.2 Technische Unterlagen
6 Betriebsbedingungen
  6.1 Übliche Betriebsbedingungen
  6.2 Besondere Betriebsbedingungen
  6.3 Bedingungen während des Transports und der Lagerung
7 Bauanforderungen
  7.1 Allgemeines
  7.2 Abmessungen
  7.3 Befestigungseinrichtungen
  7.4 Tragfähigkeit
  7.5 Hilfsmittel zum Heben und zum Transport
  7.6 Zugang zum Inneren des Gehäuses
  7.7 Schutzleiterstromkreis
  7.8 Isolationsfestigkeit
  7.9 Schutzgrad (IK-Code)
  7.10 Schutzgrad (IP-Code)
8 Typprüfungen
  8.1 Allgemeine Prüfbedingungen
  8.2 Aufschriften
  8.3 Statische Belastungen
  8.4 Anheben
  8.5 Nachweis der Ausziehkräfte von Metalleinlegeteilen
  8.6 Nachweis des Schutzgrades gegen mechanische
       Beanspruchungen (IK-Code)
  8.7 Nachweis des Schutzgrades (IP-Code)
  8.8 Eigenschaften von Isolierstoffen
  8.9 Nachweis der Isolationsfestigkeit
  8.10 Nachweis der Durchgängigkeit des
       Schutzleiterstromkreises
  8.11 Nachweis der Witterungsbeständigkeit
  8.12 Nachweis der Korrosionsbeständigkeit

Covers definitions, classifications, characteristics and test requirements for enclosures used as part of switchgear and controlgear assemblies according to the EN 60439 series. Applies to empty enclosures, prior to the incorporation of swithgear and controlgear components by the user, as supplied by the enclosure manufacturer. Not applicable to enclosures which are covered by other specific product standards. It is the responsibility of the final assembly manufacturer to comply with the safety requirements of the applicable product standard.

DocumentType	Standard
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Superseded
SupersededBy	DIN EN 62208 : 2012

Standards	Relationship
UNE-EN 50298:1999	Identical
I.S. EN 50298:1999	Identical
NF EN 50298 : 1999	Identical
VDE 0660-511 : 2012	Corresponds
EN 50298:1998	Identical
NEN EN 50298 : 1998	Identical
SN EN 50298 : 1998	Identical
NBN EN 50298 : 1999	Identical
BS EN 50298:1999	Identical

DIN EN 60068-2-2 : 1995	ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
DIN IEC 60068-2-30:1986-09	ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE)
DIN ISO 11469:1995-09	PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTIC PRODUCTS
DIN EN 60068-2-75 : 2015	ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS (IEC 60068-2-75:2014)
HD 528 : 200S2	A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR
ISO 11469:2016	Plastics — Generic identification and marking of plastics products
VDE 0660-503 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
IEC 60068-2-11:1981	Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
VDE 0660-507 : 1997	A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR
DIN IEC 60068-2-11:1982-08	BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST KA: SALT MIST
EN 50102:1995/corrigendum Jul. 2002	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
VDE 0471-2-11 : 2014	FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
DIN EN 60695-2-11 : 2014	FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
EN 60439-5:2006	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
VDE 0660 : 1982
ISO 4628-3:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
DIN EN ISO 2409:2013-06	PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013)
DIN EN 50102 : 1997 AMD 1 1999	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
VDE 0606-100 : DRAFT 94	GENERAL REQUIREMENTS FOR ENCLOSURES FOR ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS
DIN EN 60695-2-10 : 2014	FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013)
EN 60695-2-10:2013	Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
VDE 0470-100 : 97 AMD 1 99	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
VDE 0471-2-10 : 2014	FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013)
EN 60439-1:1999/A1:2004	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
ISO 4892-2:2013	Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
IEC 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60670:1989+AMD1:1994 CSV	General requirements for enclosures for accessories for household and similar fixed electrical installations
ISO 179:1993	Plastics Determination of Charpy impact strength
DIN EN 60439-5 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 2409:2013	Paints and varnishes Cross-cut test
DIN VDE 0660-507 : 1997	A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCH GEAR AND CONTROL GEAR
ISO 178:2010	Plastics Determination of flexural properties
DIN EN 60439-1 : 2005	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
EN 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
IEC 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)