DIN EN 573-3:2013-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
Available format(s)
Hardcopy , PDF
Superseded date
07-10-2019
Language(s)
German, English
Published date
01-01-2013
This standard is included in DIN Handbook 450/1 and 450/2.
| DevelopmentNote |
Together with DIN EN 573-4; supersede DIN 1725-1. (11/1999) Supersedes DIN 1712-3 (07/2002) Supersedes DIN EN 573-4. (11/2007)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 573-3 : 2013 | Identical |
| SN EN 573-3 : 2013 | Identical |
| I.S. EN 573-3:2013 | Identical |
| NS EN 573-3 : 2013 | Identical |
| NEN EN 573-3 : 2013 | Identical |
| UNI EN 573-3 : 2013 | Identical |
| EN 573-3:2013 | Identical |
| NF EN 573-3 : 2013 | Identical |
| BS EN 573-3:2013 | Identical |
| UNE-EN 573-3:2014 | Identical |
| NBN EN 573-3 : 2013 | Identical |
| BWB TL 8315-0060 : 1ED 2002 | STRAP CLOSURES; BUCKLES WITH TONGUES |
| BWB TL 4210-0029 : 3ED 1999 | FIRE HOSE NOZZLE FOR LOW-EXPANSION FOAM |
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| DIN HDBK 452 : 2ED 2005 | ALUMINIUM 3 - HUETTENALUMINIUM, ALUMINIUMGUSS, SCHMIEDESTUECKE, VORMATERIAL |
| DIN 16963-11:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS |
| DIN HDBK 450/1 : 4ED 2015 | ALUMINIUM 1 - BAENDER, BLECHE, PLATTEN, FOLIEN, BUTZEN, RONDEN, GESCHWEISSTE ROHRE, VORMATERIAL |
| DIN 18516-1:2010-06 | Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing |
| BWB TL 4210-0050 : 6ED 2005 | DISTRIBUTOR FOR FIRE FIGHTING PURPOSES |
| VDI 2102 Blatt 2:2013-04 | Emission control - Copper and copper alloy melting plants |
| DIN 14330:2012-05 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C NOMINAL PRESSURE PN 16 |
| DIN 3417:1998-05 | METALLIC SLIDE FASTENERS; DESIGN TYPES, DIMENSIONS, MATERIALS |
| BWB TL 8010-0044 : 5ED 2008 | WASH PRIMER, FREE FROM CHROMATE, FOR THE PRETREATMENT OF METALS - INDUSTRIAL USE |
| DIN 6336:2008-05 | STAR GRIPS |
| BWB TL 8010-0025 : 4ED 1998 | SEALING VARNISH FOR AMMUNITION - INDUSTRIAL |
| DIN HDBK 450/3 : 1ED 2012 | ALUMINIUM 3 - HUETTENALUMINIUM, ALUMINIUMGUSS, SCHMIEDESTUECKE, VORMATERIAL |
| DIN 4140:2014-04 | Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
| DIN 18360:2019-09 | German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Metal construction works |
| DIN 18339:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - SHEET METAL ROOFING AND WALL COVERING WORK |
| BWB TL 9905-0034 : 2ED 1999 | TRAFFIC CONTROL KIT, MILITARY POLICE |
| DIN 14380:2014-08 | PRESSURE LIMITATION VALVE, NOMINAL PRESSURE 16 |
| DIN HDBK 450 : 2ED 2005 | ALUMINIUM 1 - BAENDER, BLECHE, PLATTEN, FOLIEN, BUTZEN, RONDEN, GESCHWEISSTE ROHRE, VORMATERIAL |
| DIN 51581-1:2011-09 | Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test |
| DIN 14368:2015-12 | BRANCHPIPE-HOLDER FOR NOMINAL PRESSURE 16 |
| DIN HDBK 451 : 1ED 2002 | |
| DIN 32877:2000-08 | Optoelectronic measurement of form, profile and distances |
| DIN 18360:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - METALWORK |
| DIN 40501-2:2005-03 | Aluminium for use in electrical engineering - Part 2: Tubes, rods, bars and sections - Technical delivery conditions |
| DIN 81249-2:2013-05 | CORROSION OF METALS IN SEA WATER AND SEA ATMOSPHERE - PART 2: FREE CORROSION IN SEA WATER |
| DIN 4567:1998-08 | DESIGN OF SPECIAL-PURPOSE LADDERS FOR PROFESSIONAL USE |
| DIN 17611:2011-11 | Anodized products of aluminium and wrought aluminium alloys - Technical conditions of delivery |
| DIN HDBK 450/2 : 3ED 2017 |
| EN 1715-2:2008 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications |
| EN 13957:2008 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
| EN 1301-2:2008 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
| EN 851:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 683-2:2006 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
| EN 573-2:1994 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
| EN 485-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| TEAL 1 : 2015 | INTERNATIONAL ALLOY DESIGNATIONS AND CHEMICAL COMPOSITION LIMITS FOR WROUGHT ALUMINUM AND WROUGHT ALUMINUM ALLOYS |
| EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 570:2007 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
| EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN 13958:2008 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
| EN 13981-1:2003 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
| EN 941:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| EN 13981-4:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
| EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| EN 1386:2007 | Aluminium and aluminium alloys - Tread plate - Specifications |
| EN 1592-2:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
| EN 1715-4:2008 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications |
| EN 546-2:2006 | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
| EN 573-1:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| EN 1715-3:2008 | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
| EN 603-2:1996 | Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties |
$166.20
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.