Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 89:2015-08

Current
Current

The latest, up-to-date edition.

GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
Available format(s)

Hardcopy , PDF

Language(s)

German, English

Published date

01-01-2015

National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of storage water heaters
5 Construction requirement
6 Operational requirements
7 Rational use of energy
8 Fitness for purpose
9 Marking and instructions
10 Ecodesign Data
11 Energy Labelling Data
12 Figures referenced in this standard
Annex A (informative) - National situations
Annex B (normative) - Test apparatus for type
        C[11] appliances
Annex C (normative) - Test apparatus for type
        C[21] appliances
Annex D (informative) - Examples of composition
        of the gas circuit
Annex E (normative) - Soundness test - Volumetric
        method
Annex F (informative) - Guidelines for extension to
        other categories
Annex G (informative) - A - deviations
Annex H (informative) - NO[x] conversion calculation
Annex I (informative) - Requirements and test methods
        for separate air supply and combustion products
        evacuation ducts of type C6 water heaters
Annex J (normative) - Lists of materials currently used
Annex K (normative) - Test methods to determine the
        effects of to long-term thermal load, long-term
        condensate exposure, condensing/non-condensing
        cycling and resistance to UV radiation
Annex L (normative) - Parts in copper or copper alloys
Annex M (informative) - Compilation of the test
        conditions for the various gas families
Annex N (informative) - Alternative Method for the
        determination of the nominal heat input or the
        maximum and minimum heat input (according
        to 6.3.1) for appliances using a pneumatic gas/air
        ratio control system
Annex ZA (informative) - Clauses of this European
         Standard addressing essential requirements or
         other provisions of UE Directives
Annex ZB (informative) - Relationship between this
         European Standard and the requirements of
         Commission Regulation (EU) No 814/2013
Annex ZC (informative) - Relationship between this
         European Standard and the requirements of
         Commission Delegated Regulation (EU)
         No 812/2013
Bibliography

Specifies the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses, hereafter called 'appliance'.

DevelopmentNote
Supersedes DIN 3377. (05/2001) DRAFT AMD 1 issued in February 2017. (02/2017)
DocumentType
Standard
Pages
161
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current
Supersedes

Standards Relationship
BS EN 89:2015 Identical
UNI EN 89 : 2008 Identical
SN EN 89:2015 Identical
NS EN 89 : 1999 Identical
I.S. EN 89:2015 Identical
UNE-EN 89:2016 Identical
NEN EN 89 : 2015 Identical
EN 89:2015 Identical
NBN EN 89 : 2015 Identical

VDI 3805 Blatt 20:2017-02 Product data exchange in the building services - Storage tanks and instantaneous water heater
BGR 146 : 2003 FLUESSIGGASANLAGEN ZU HAUSHALTSZWECKEN AUF WASSERFAHRZEUGEN IN DER BINNENSCHIFFAHRT
VDE 0700-450 : 2001 ELECTRICAL EQUIPMENT OF NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS

EN 1859:2009+A1:2013 Chimneys - Metal chimneys - Test methods
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN 13203-1:2015 Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
EN 13216-1:2004 Chimneys - Test methods for system chimneys - Part 1: General test methods
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
EN 13203-2:2015 Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ISO 8256:2004 Plastics — Determination of tensile-impact strength
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
ISO 7619:1997 Rubber Determination of indentation hardness by means of pocket hardness meters
EN 126:2012 Multifunctional controls for gas burning appliances
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
ISO 6914:2013 Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
EN 14471:2013+A1:2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
ISO 301:2006 Zinc alloy ingots intended for castings
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
ISO 178:2010 Plastics Determination of flexural properties
ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 573-1:2004 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density

View more information
$442.75
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more