|
DIN EN ISO 20567-3:2013-04
|
PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
|
|
DIN EN ISO 9117-2:2010-07
|
Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010)
|
|
DIN 53781:2016-03
|
PAINTS AND VARNISHES - METHODS FOR TESTING THE RESISTANCE OF COATINGS TO IONIZING RADIATION IN NUCLEAR PLANTS
|
|
DIN 53150:2002-09
|
PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD)
|
|
DIN EN ISO 28199-1:2010-01
|
Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009)
|
|
DIN EN ISO 9117-1:2009-10
|
Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
|
|
DIN EN ISO 11890-2:2013-07
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
|
|
DIN EN ISO 2811-1:2016-08
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
|
|
DIN EN ISO 6272-2:2011-11
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
|
|
DIN EN ISO 11507:2007-05
|
PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
|
|
DIN EN ISO 2812-2:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
|
|
DIN EN ISO 17132:2008-01
|
PAINTS AND VARNISHES - T-BEND TEST
|
|
DIN EN ISO 3233-1:2013-05
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013)
|
|
DIN EN ISO 2812-3:2012-10
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
|
|
DIN EN ISO 14680-1:2006-04
|
Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000)
|
|
DIN EN ISO 14680-3:2006-04
|
Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000)
|
|
DIN EN ISO 14680-2:2006-04
|
Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000)
|
|
DIN EN ISO 6272-1:2011-11
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
|
|
DIN EN ISO 20566:2013-06
|
Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013)
|
|
DIN EN ISO 9038:2013-12
|
Determination of sustained combustibility of liquids (ISO 9038:2013)
|
|
DIN EN ISO 1520:2007-11
|
PAINTS AND VARNISHES - CUPPING TEST
|
|
DIN EN ISO 7783-1:1999-06
|
PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS
|
|
DIN 53215:1998-11
|
DETERMINING THE NON-VOLATILE MATTER CONTENT OF BITUMINOUS COATING MATERIALS
|
|
DIN 53219:2009-08
|
PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - METHOD BY DETERMINATION OF THE PRACTICAL DRY-FILM DENSITY
|
|
DIN EN ISO 9117-3:2010-07
|
Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
|
|
DIN EN ISO 3233-2:2014-10
|
PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF THE DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014)
|
|
DIN EN ISO 12137:2012-01
|
Paints and varnishes - Determination of mar resistance (ISO 12137:2011)
|
|
DIN EN ISO 7783:2012-02
|
PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011)
|
|
DIN EN ISO 16474-1:2014-03
|
PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
|
|
DIN EN ISO 2812-5:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
|
|
DIN EN ISO 6860:2006-06
|
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)
|
|
DIN EN ISO 16862:2006-08
|
Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003)
|
|
DIN EN ISO 11997-2:2013-12
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
|
|
DIN EN ISO 15528:2013-12
|
PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013)
|
|
DIN EN ISO 3679:2015-06
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
|
|
DIN EN ISO 13803:2015-02
|
PAINTS AND VARNISHES - DETERMINATION OF HAZE ON PAINT FILMS AT 20 DEGREES (ISO 13803:2014)
|
|
DIN EN ISO 3251:2008-06
|
PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT
|
|
DIN EN ISO 11890-1:2007-09
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
|
|
DIN EN ISO 1519:2011-04
|
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
|
|
DIN EN ISO 15181-1:2007-10
|
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007)
|
|
DIN EN ISO 7253:2002-04
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
|
|
DIN EN ISO 16925:2014-06
|
Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014)
|
|
DIN EN ISO 9117-5:2012-11
|
Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
|
|
DIN EN ISO 9117-4:2012-11
|
Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012)
|
|
DIN HDBK 286/4 : 2ED 2013
|
KORROSIONSSCHUTZ DURCH BESCHICHTUNGEN UND UEBERZUEGE 4 - KORROSIONSGESCHUETZTE ERZEUGNISSE, ALLGEMEINE NORMEN
|
|
DIN EN ISO 2431:2012-03
|
PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011)
|
|
DIN EN ISO 1524:2013-06
|
PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013)
|
|
DIN EN ISO 1522:2007-04
|
Paints and varnishes - Pendulum damping test (ISO 1522:2006)
|
|
DIN EN ISO 16927:2014-06
|
PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
|
|
DIN HDBK 266 : 2ED 2004
|
KORROSIONSSCHUTZ VON STAHL DURCH BESCHICHTUNGEN UND UEBERZUEGE 3 - DIN-EN-ISO-NORMEN
|
|
DIN EN ISO 1518-2:2012-01
|
PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
|
|
DIN EN ISO 6504-3:2007-05
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE
|
|
DIN EN ISO 6504-1:2006-04
|
PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 1: KUBELKA-MUNK METHOD FOR WHITE AND LIGHT-COLOURED PAINTS
|
|
DIN EN ISO 2409:2013-06
|
PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.