DIN EN ISO 6507-1:2016-08 (Draft)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD
Available format(s)
Hardcopy , PDF
Superseded date
21-08-2016
Language(s)
German
Published date
01-01-2016
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Prinzip
4 Symbole und ihre Benennung
5 Prüfmaschine
6 Probe
7 Durchführung
8 Messunsicherheit
9 Prüfbericht
Anhang A (normativ) Mindestdicke der Proben in Abhängigkeit
von Prüfkraft und Härte
Anhang B (normativ) Tabellen für Korrekturfaktoren zur
Benutzung bei der Prüfung an gekrümmten Oberflächen
Anhang C (normativ) Tabellen zur Bestimmung der Vickershärte bei der
Prüfung an chcncn Oberflächen
Anhang D (informativ) Verfahren für die Untersuchung der
Messunsicherheit der Härteprüfmaschine durch
den Anwender
Anhang E (informativ) Literaturhinweise (Besonderheiten der
Mikrohärteprüfung)
Anhang ZA (normativ) Normative Verweisungen Auf internaionale
Publication mit ihren entsprechenden
europäischen Publikationen
This standard is included in DIN HDBK 218 and 19. Describes the Vickers hardness test method, for the three different ranges of test force for metallic materials.
| DevelopmentNote |
Supersedes DIN 50133, DIN ISO 409-1 & DIN ISO 409-2. (08/2000) DRAFT 2016 issued in August 2016. (08/2016)
|
| DocumentType |
Draft
|
| Pages |
71
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| ISO 6507-1:2005 | Identical |
| NBN EN ISO 6507-1 : 2006 | Identical |
| NEN EN ISO 6507-1 : 2006 | Identical |
| I.S. EN ISO 6507-1:2006 | Identical |
| SN EN ISO 6507-1 : 2006 | Identical |
| UNI EN ISO 6507-1 : 2006 | Identical |
| UNE-EN ISO 6507-1:2006 | Identical |
| BS EN ISO 6507-1:2005 | Identical |
| ONORM EN ISO 6507-1 : 2006 | Identical |
| EN ISO 6507-1:2018 | Identical |
| I.S. EN ISO 6507-1:2018 | Identical |
| NF EN ISO 6507-1 : 2018 | Identical |
| DIN EN ISO 6506-2:2016-04 (Draft) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| DIN EN ISO 15156-3:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| DIN EN ISO 21672-1:2012-07 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| VDG P 695 : 2008 | TECHNISCHE LIEFERBEDINGUNGEN FUER FEINGUSSSTUECKE - ALLGEMEINE BEDINGUNGEN |
| DIN ISO 22826:2008-08 | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
| DIN EN ISO 12670:2015-12 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| DIN EN ISO 9015-2:2016-10 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
| DIN EN ISO 1797:2016-05 (Draft) | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| DIN 17751:2002-09 | TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
| DIN 50150:2000-10 | TESTING OF METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
| DIN 685-3:2001-02 | ROUND STEEL LINK CHAINS, TESTED - PART 3: TEST |
| DIN EN ISO 14917:2015-09 (Draft) | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
| DIN EN ISO 5840-3:2013-06 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| DIN EN ISO 15156-2:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN EN ISO 10673:2009-10 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| DIN 6773:2001-04 | HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
| DIN 5696-1:2015-06 | ROUND STEEL LINK CHAINS - ROUND STEEL LINK CHAINS, PITCH 3,5D, FOR CHAIN STRANDS IN BUCKET ELEVATORS - PART 1: GRADE 2, CASE HARDENED |
| DIN HDBK 218 : 6ED 2014 | |
| DIN EN ISO 14918:1999-03 | THERMAL SPRAYING - APPROVAL TESTING OF THERMAL SPRAYERS |
| DIN EN ISO 17937:2016-01 | Dentistry - Osteotome (ISO 17937:2015) |
| DIN EN ISO 19715:2016-03 (Draft) | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN ISO 7089:2000-11 | PLAIN WASHERS - NORMAL SERIES, PRODUCT GRADE A |
| DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 4498:2010-11 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
| DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| DIN EN ISO 7785-1:1999-08 | DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES |
| VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| VDI 3824 Blatt 4:2001-08 | Quality assurance of PVD and CVD hard coating - Inspection planning of hard coatings |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| DIN 6799:2017-06 | RETAINING WASHERS FOR SHAFTS |
| DIN EN ISO 16635-1:2014-09 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| DIN 2269:1998-11 | VERIFICATION OF GEOMETRICAL PARAMETERS - CYLINDRICAL MEASURING PIN |
| DIN EN ISO 18556:2016-09 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| DIN EN ISO 1797-3:2013-06 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| DIN EN ISO 6507-3:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| DIN EN ISO 19490:2016-07 (Draft) | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
| DIN EN ISO 7090:2000-11 | PLAIN WASHERS, CHAMFERED - NORMAL SERIES, PRODUCT GRADE A |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| KTA 1408.1 : 2015 COR 2016 | QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 1: QUALIFICATION TESTING |
| DIN 17750:2002-09 | Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
| DIN EN ISO 9873:2016-03 (Draft) | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| DIN 21530-4:2016-09 | MINE SUPPORT - PART 4: TESTING |
| DIN EN ISO 9015-1:2011-05 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| DIN 2093:2013-02 | DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
| DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| DIN EN ISO 1797-1:2011-11 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS (ISO 1797-1:2011) |
| DIN EN ISO 7093-2:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| DIN EN ISO 22068:2014-06 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| DIN 6700-2:2001-05 | WELDING OF RAILWAYS VEHICLES AND PARTS - PART 2: QUALIFICATION OF MANUFACTURER OF WELDED ROLLING STOCK MATERIALS; QUALITY ASSURANCE |
| DIN HDBK 19 : 17ED 2015 | MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 1 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMUNABHAENGIG), PRUEFMASCHINEN |
| DIN 32525-4:2010-05 | Welding consumables - Testing of welding consumables by means of weld metal specimens - Part 4: Test piece for determining the hardness of surfacing |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| DIN 51200:2016-08 | MATERIALS TESTING MACHINES - DESIGN AND APPLICATION OF HOLDING DEVICES FOR TEST PIECES IN HARDNESS TESTING MACHINES |
| DIN EN ISO 12690:2011-04 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| DIN EN ISO 10510:2011-07 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
| DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| ISO 6507-4:2005 | Metallic materials Vickers hardness test Part 4: Tables of hardness values |
| ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
| DIN EN ISO 6507-4:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES |
| ISO 6507-3:2005 | Metallic materials Vickers hardness test Part 3: Calibration of reference blocks |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
$153.95
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.