DIN EN ISO 683-17:2015-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
01-12-2023
German, English
01-02-2015
National foreword
National Annex NA (informative) - Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing process
7 Requirements
8 Inspection
9 Test methods
10 Marking
Annex A (normative) - Supplementary or special
requirements
Annex B (informative) - Designations of the steels
given in Tables 3, 5 and 6 and of comparable
grades covered in various designation systems
Annex C (informative) - Dimensional standards applicable
to products complying with this part ISO 683
Bibliography
This standard is included in DIN HDBK 218, 404, 404/1 and 24.
DevelopmentNote |
Supersedes DIN 17230 (05/2000)
|
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
I.S. EN ISO 683-17:2014 | Identical |
NBN EN ISO 683-17 : 2014 | Identical |
BS EN ISO 683-17:2014 | Identical |
NS EN ISO 683-17 : 2014 | Identical |
UNE-EN ISO 683-17:2015 | Identical |
NF EN ISO 683-17 : 2015 | Identical |
UNI EN ISO 683-17 : 2014 | Identical |
ISO 683-17:2014 | Identical |
NEN EN ISO 683-17 : 2014 | Identical |
SN EN ISO 683-17 : 2014 | Identical |
EN ISO 683-17:2014 | Identical |
ONORM EN ISO 683-17 : 2015 | Identical |
DIN HDBK 24 : 9ED 2012 | |
ASTM D 7421 : 2016 : REDLINE | Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine |
ASTM D 6425 : 2017 : REDLINE | Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine |
ASTM D 7594 : 2016 : REDLINE | Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
ASTM D 7217 : 2016 : REDLINE | Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
ASTM D 7420 : 2018 : REDLINE | Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
DIN HDBK 218 : 6ED 2014 | |
DIN HDBK 404 : 5ED 2009 | STAHL UND EISEN: GUETENORMEN 4 - MASCHINENBAU, WERKZEUGBAU - STAHLAUSWAHL. MASCHINENBAUSTAHL FUER ALLGEMEINE VERWENDUNG. MASCHINENBAUSTAHL FUER BESONDERE VERARBEITUNG ODER VERWENDUNG. PRAEZISIONSSTAHLROHRE. WERKZEUGSTAEHLE. STAHLGUSS |
DIN HDBK 404/1 : 1ED 2013 | MASCHINENBAU/WERKZEUGBAU - MASCHINENBAUSTAHL FUER ALLGEMEINE UND BESONDERE VERWENDUNG |
ASTM D 5706 : 2016 : REDLINE | Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
DIN ISO 6370-2:2013-08 | Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2011) |
DIN 628-5:2011-06 | ROLLING BEARINGS - ANGULAR CONTACT RADIAL BALL BEARINGS - PART 5: DOUBLE ROW, WITH SPACER BALLS |
ASTM D 5707 : 2016 : REDLINE | Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
SAE AMS 2431/5 : 2011 | PEENING MEDIA, HARDENED STEEL PEENING BALLS |
ISO 404:2013 | Steel and steel products — General technical delivery requirements |
EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
ISO 6929:2013 | Steel products — Vocabulary |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
ISO/TS 4949:2016 | Steel names based on letter symbols |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
ISO 4969:2015 | Steel Etching method for macroscopic examination |
DIN EN ISO 642:2000-01 | STEEL - HARDENABILITY TEST BY END QUENCHING (JOMINY TEST) |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
DIN EN ISO 377:2015-12 | STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING (ISO 377:2017) |
DIN EN ISO 3887:2016-08 (Draft) | STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
ISO 3763:1976 | Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions |
ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
EN 10278:1999 | Dimensions and tolerances of bright steel products |
ISO 3887:2003 | Steels Determination of depth of decarburization |
DIN EN ISO 643:2015-06 (Draft) | STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012) |
ISO 10474:2013 | Steel and steel products — Inspection documents |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
DIN EN ISO 14284:2003-02 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.