|
BS 7448-1:1991
|
Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials
|
|
ISO 14372:2011
|
Welding consumables Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
|
|
ASTM A 1032 : 2015 : REDLINE
|
Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
|
|
ASTM G 146 : 2001
|
Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
|
|
ISO 9587:2007
|
Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
|
NACE TM 02 84 : 2016
|
EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
|
|
DIN EN ISO 11782-1:2008-08
|
Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998)
|
|
DIN EN ISO 14372:2011-10
|
WELDING CONSUMABLES - DETERMINATION OF MOISTURE RESISTANCE OF MANUAL METAL ARC WELDING ELECTRODES BY MEASUREMENT OF DIFFUSIBLE HYDROGEN (ISO 14372:2011)
|
|
NACE TM 01 77 : 2016
|
LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
|
|
DIN EN ISO 7539-7:2005-05
|
CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 7: METHOD FOR SLOW STRAIN RATE TESTING
|
|
ISO 10587:2000
|
Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method
|
|
ISO 12683:2004
|
Mechanically deposited coatings of zinc Specification and test methods
|
|
ISO 15330:1999
|
Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
|
|
NACE TM 01 98 : 2016
|
SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE
|
|
ISO 15724:2001
|
Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method
|
|
DIN-Fachbericht CEN ISO/TR 17844:2004-11
|
WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS
|
|
DIN EN ISO 17081:2014-10
|
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2014)
|
|
DIN EN ISO 11782-2:2008-08
|
Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens (ISO 11782-2:1998)
|
|
ISO 11782-1:1998
|
Corrosion of metals and alloys Corrosion fatigue testing Part 1: Cycles to failure testing
|
|
ISO 7539-9:2003
|
Corrosion of metals and alloys Stress corrosion testing Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
|
|
ISO 7539-6:2011
|
Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
|
|
ISO 9588:2007
|
Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
|
|
ISO 7539-7:2005
|
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
|
|
DIN EN ISO 11114-4:2015-08 (Draft)
|
TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017)
|
|
ISO 17081:2014
|
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
|
|
ISO 11114-4:2017
|
Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
|
|
ASTM F 2078 : 2015 : REDLINE
|
Standard Terminology Relating to Hydrogen Embrittlement Testing
|
|
ISO 3690:2012
|
Welding and allied processes Determination of hydrogen content in arc weld metal
|
|
ISO 2626:1973
|
Copper Hydrogen embrittlement test
|
|
DIN EN ISO 7539-9:2008-08
|
Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2003)
|
|
ASTM F 1624 : 2012-11
|
TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE
|
|
DIN EN ISO 7539-6:2012-01
|
CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 6: PREPARATION AND USE OF PRECRACKED SPECIMENS FOR TESTS UNDER CONSTANT LOAD OR CONSTANT DISPLACEMENT (ISO 7539-6:2011)
|
|
ASTM F 326 : 1996
|
Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes
|
|
ISO 11782-2:1998
|
Corrosion of metals and alloys Corrosion fatigue testing Part 2: Crack propagation testing using precracked specimens
|
|
DIN EN ISO 3690:2012-07
|
WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.