|
ISO 11040-4:2015
|
Prefilled syringes Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
|
|
ISO 8537:2016
|
Sterile single-use syringes, with or without needle, for insulin
|
|
ISO 80369-20:2015
|
Small-bore connectors for liquids and gases in healthcare applications Part 20: Common test methods
|
|
DIN EN ISO 80369-3 E : 2016
|
SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS (ISO 80369-3:2016)
|
|
EN ISO 80369-3:2016
|
Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016)
|
|
EN ISO 80369-6 : 2016 COR 2016
|
SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO 80369-6:2016, CORRECTED VERSION 2016-11-15)
|
|
EN ISO 5356-1:2015
|
Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015)
|
|
IEC 60601-1:2005+AMD1:2012 CSV
|
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
|
|
EN ISO 80369-1:2010
|
Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010)
|
|
ISO 8638:2010
|
Cardiovascular implants and extracorporeal systems Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
|
|
ISO 5356-1:2015
|
Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets
|
|
ISO 16142-1:2016
|
Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
|
|
ISO 10241-2:2012
|
Terminological entries in standards — Part 2: Adoption of standardized terminological entries
|
|
DIN EN ISO 178 E : 2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
|
|
ISO 3040:2016
|
Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
|
|
DIN EN ISO 8638 E : 2014
|
CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010)
|
|
ISO 5356-2:2012
|
Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors
|
|
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
|
ISO 8185:2007
|
Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems
|
|
DIN EN 62366-1 : 2017
|
MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015 + COR1:2016)
|
|
DIN EN ISO 80369-20 E : 2015
|
SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS (ISO 80369-20:2015)
|
|
ISO 80369-6:2016
|
Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications
|
|
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
|
VDE 0750-241-1 : 2017
|
MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015 + COR1:2016)
|
|
ISO 8536-4:2010
|
Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed
|
|
EN ISO 5356-2:2012
|
Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012)
|
|
ISO 80369-1:2010
|
Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements
|
|
DIN ISO 3040:1991-09
|
TECHNICAL DRAWINGS - DIMENSIONING AND TOLERANCING - CONES
|
|
EN ISO 14971:2012
|
Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
|
|
DIN ISO 11040-4 E : 2017
|
PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
|
|
ISO 10241-1:2011
|
Terminological entries in standards — Part 1: General requirements and examples of presentation
|
|
ISO 14971:2007
|
Medical devices Application of risk management to medical devices
|
|
EN ISO 8185:2009
|
Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems (ISO 8185:2007)
|
|
ISO 594-2:1998
|
Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings
|
|
VDE 0750-1 : 2013
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012)
|
|
VDE 0750-1-11 : 2016
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT (IEC 60601-1-11:2015)
|
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
|
DIN EN 60601-1-12 : 2016
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT (IEC 60601-1-12:2014)
|
|
EN 1707 : 1996
|
CONICAL FITTINGS WITH A 6 % (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - LOCK FITTINGS
|
|
ISO 594-1:1986
|
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements
|
|
EN 13544-2:2002+A1:2009
|
Respiratory therapy equipment - Part 2: Tubing and connectors
|
|
VDE 0750-1-12 : 2016
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT (IEC 60601-1-12:2014)
|
|
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics
|
|
ISO 80369-3:2016
|
Small-bore connectors for liquids and gases in healthcare applications — Part 3: Connectors for enteral applications
|
|
EN ISO 80369-20:2015
|
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015)
|
|
DIN EN 60601-1-11 : 2016
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT (IEC 60601-1-11:2015)
|
|
DIN EN ISO 80369-6 E : 2016
|
SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO 80369-6:2016)
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.