DIN HDBK KUNSTSTOFFE BAND 2 : 2017
Current
Current
The latest, up-to-date edition.
HANDBUCH KUNSTSTOFFE - BAND 2 - CHEMISCHE UND OPTISCHE GEBRAUCHSEIGENSCHAFTEN, VERARBEITUNGSEIGENSCHAFTEN - PRUEFNORMEN
Published date
12-01-2013
The individual standards included in this DIN Handbook are listed in the Reference Standards fields.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN ISO 8975:1992-01 | PLASTICS - PHENOLIC RESINS - DETERMINATION OF PH |
| DIN EN ISO 177:2016-09 (Draft) | PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016) |
| DIN EN ISO 11401:1998-10 | PLASTICS - PHENOLIC RESINS - SEPARATION BY LIQUID CHROMATOGRAPHY |
| DIN EN ISO 14855-2:2009-10 | DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS UNDER CONTROLLED COMPOSTING CONDITIONS - METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE - PART 2: GRAVIMETRIC MEASUREMENT OF CARBON DIOXIDE EVOLVED IN A LABORATORY-SCALE TEST |
| DIN EN ISO 11667:1999-10 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS |
| DIN EN ISO 11337:2011-04 | Plastics - Polyamides - Determination of -caprolactam and -laurolactam by gas chromatography (ISO 11337:2010) |
| DIN EN ISO 29664:2016-09 (Draft) | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010) |
| DIN EN ISO 584:1998-03 | PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF REACTIVITY AT 80 DEGREE C (CONVENTIONAL METHOD) |
| DIN EN 1243:2011-07 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| DIN EN 12575:1998-09 | PLASTICS - THERMOSET MOULDING COMPOUNDS - DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC |
| DIN EN ISO 22088-6:2009-10 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006) |
| DIN ISO 1409:2008-11 | PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DETERMINATION OF SURFACE TENSION BY THE RING METHOD |
| DIN 50035:2012-09 | TERMS AND DEFINITIONS USED ON AGEING OF MATERIALS - POLYMERIC MATERIALS |
| DIN EN ISO 4892-2:2013-06 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| DIN EN ISO 877-2:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS |
| DIN EN ISO 3521:1999-10 | PLASTICS - UNSATURATED POLYESTER AND EPOXY RESINS - DETERMINATION OF OVERALL VOLUME SHRINKAGE |
| DIN EN ISO 11248:1999-10 | PLASTICS - THERMOSETTING MOULDING MATERIALS - EVALUATION OF SHORT-TERM PERFORMANCE AT ELEVATED TEMPERATURES |
| DIN ISO 171:2000-06 | Plastics - Determination of bulk factor of moulding materials (ISO 171:1980) |
| DIN EN ISO 4577:1999-09 | PLASTICS - POLYPROPYLENE AND PROPYLENE-COPOLYMERS - DETERMINATION OF THERMAL OXIDATIVE STABILITY IN AIR, OVEN METHOD |
| DIN EN ISO 4608:1998-08 | Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998) |
| DIN EN ISO 1133-2:2012-03 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011) |
| DIN EN ISO 1600:2000-05 | PLASTICS - CELLULOSE ACETATE - DETERMINATION OF LIGHT ABSORPTION ON MOULDED SPECIMENS PRODUCED USING DIFFERENT PERIODS OF HEATING |
| DIN EN ISO 22007-4:2016-10 (Draft) | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| DIN EN ISO 846:1997-10 | PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS |
| DIN EN ISO 14855-1:2013-04 | DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS UNDER CONTROLLED COMPOSTING CONDITIONS - METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE - PART 1: GENERAL METHOD (ISO 14855-1:2012) |
| DIN EN ISO 3671:1998-10 | Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976) |
| DIN EN 1242:2013-05 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN ISO 877-1:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| DIN EN ISO 11409:1998-10 | PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY |
| DIN CEN/TS 16861;DIN SPEC 91009:2015-08 | PLASTICS - RECYCLED PLASTICS - DETERMINATION OF MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLY(ETHYLENE TEREPHTHALATE) (PET) |
| DIN EN ISO 11358-1:2014-10 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| DIN EN ISO 1599:2000-02 | PLASTICS - CELLULOSE ACETATE - DETERMINATION OF VISCOSITY LOSS ON MOULDING |
| DIN 53400:1988-06 | TESTING OF PLASTICIZERS; DETERMINATION OF PHYSICAL AND CHEMICAL CHARACTERISTICS OF PLASTICIZERS |
| DIN 53704:1988-11 | TESTING OF PLASTICS; DETERMINATION OF THE FREE PHENOL IN PHENOLIC MOULDING MATERIALS; PHOTOMETRICAL METHOD |
| DIN EN ISO 12115:1997-08 | FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF FLOWABILITY, MATURATION AND SHELF LIFE |
| DIN EN ISO 60:2000-01 | Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); English version of DIN EN ISO 60 |
| DIN ISO 976:2016-12 | RUBBER AND PLASTICS - POLYMER DISPERSIONS AND RUBBER LATICES - DETERMINATION OF PH (ISO 976:2013) |
| DIN CEN/TS 16295;DIN SPEC 16452:2012-04 | PLASTICS - DECLARATION OF THE BIO-BASED CARBON CONTENT |
| DIN EN ISO 9773:2004-02 | Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 |
| DIN EN ISO 14852:2004-10 | DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS IN AN AQUEOUS MEDIUM - METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE |
| DIN EN ISO 11468:1999-09 | PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - DISSOLVER METHOD |
| DIN EN ISO 11357-3:2013-04 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011) |
| DIN EN ISO 1598:1999-09 | PLASTICS - CELLULOSE ACETATE - DETERMINATION OF INSOLUBLE PARTICLES |
| DIN EN ISO 1624:2002-12 | PLASTICS - VINYL CHLORIDE HOMOPOLYMER AND COPOLYMER RESINS - SIEVE ANALYSIS IN WATER |
| DIN EN ISO 1158:1998-06 | PLASTICS - VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS - DETERMINATION OF CHLORINE CONTENT |
| DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| DIN EN ISO 120:1998-10 | Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds; Colorimetric comparison method (ISO 120:1977); German version EN ISO 120:1998 |
| DIN EN ISO 10927:2011-07 | PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS) |
| DIN EN ISO 2554:1998-10 | Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998 |
| DIN EN ISO 22007-3:2012-04 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
| DIN EN ISO 1183-3:2000-05 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD |
| DIN EN ISO 2535:2003-02 | PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE |
| DIN EN ISO 17556:2012-12 | PLASTICS - DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS IN SOIL BY MEASURING THE OXYGEN DEMAND IN A RESPIROMETER OR THE AMOUNT OF CARBON DIOXIDE EVOLVED (ISO 17556:2012) |
| DIN EN ISO 7327:1997-11 | PLASTICS - HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS - DETERMINATION OF FREE ACID IN ACID ANHYDRIDE |
| DIN EN ISO 22007-1:2016-08 (Draft) | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES (ISO 22007-1:2017) |
| DIN EN ISO 13468-2:2006-07 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| DIN EN ISO 2556:2001-01 | PLASTICS - DETERMINATION OF THE GAS TRANSMISSION RATE OF FILMS AND THIN SHEETS UNDER ATMOSPHERIC PRESSURE - MANOMETRIC METHOD |
| DIN EN ISO 3001:1999-11 | PLASTICS - EPOXIDE COMPOUNDS - DETERMINATION OF EPOXIDE EQUIVALENT |
| DIN EN ISO 15512:2016-06 (Draft) | PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016) |
| DIN EN ISO 1264:1997-12 | PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE DETERMINATION OF PH OF AQUEOUS EXTRACT |
| DIN 53380-1:2000-07 | Determining the gas transmission rate of plastic film by the volumetric method |
| DIN EN ISO 1628-5:2015-05 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998) |
| DIN EN ISO 1628-1:2012-10 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012 |
| DIN EN ISO 877-3:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| DIN ISO 2115:2001-04 | Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996) |
| DIN EN 1122:2002-02 | PLASTICS - DETERMINATION OF CADMIUM - WET DECOMPOSITION METHOD |
| DIN EN ISO 6186:1998-08 | Plastics - Determination of pourability (ISO 6186:1998) |
| DIN EN ISO 1269:2007-02 | PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF VOLATILE MATTER (INCLUDING WATER) |
| DIN 75201:2011-11 | Determination of the fogging characteristics of trim materials in the interior of automobiles |
| DIN EN ISO 1628-2:1999-11 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 2: POLY(VINYL CHLORIDE) RESINS |
| DIN EN ISO 4892-1:2016-10 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| DIN EN ISO 61:2000-01 | Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); English version of DIN EN ISO 61 |
| DIN EN ISO 307:2013-08 | PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER (ISO 307:2007 + AMD 1:2013) |
| DIN EN ISO 172:1998-10 | Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998 |
| DIN 53380-4:2006-11 | TESTING OF PLASTICS - DETERMINATION OF GAS TRANSMISSION RATE - PART 4: CARBON DIOXIDE SPECIFIC INFRARED ABSORPTION METHOD FOR TESTING OF PLASTIC FILMS AND PLASTIC MOULDINGS |
| DIN EN ISO 182-3:2001-02 | Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); English version of DIN EN ISO 182-3 |
| DIN 53380-3:1998-07 | Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings |
| DIN EN ISO 6427:2014-08 | PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
| DIN EN ISO 22007-6:2015-05 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| DIN EN 12576:1998-09 | |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| DIN EN ISO 13927:2015-08 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| DIN EN ISO 14851:2016-07 (Draft) | DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS IN AN AQUEOUS MEDIUM - METHOD BY MEASURING THE OXYGEN DEMAND IN A CLOSED RESPIROMETER |
| DIN EN ISO 22007-2:2015-12 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015) |
| DIN EN 12962:2011-07 | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| DIN EN ISO 12114:1997-08 | FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF CURE CHARACTERISTICS |
| DIN 53380-5:2014-12 | TESTING OF PLASTICS - DETERMINATION OF GAS TRANSMISSION RATE - PART 5: OPTICAL METHOD FOR PLASTIC FILMS AND MOULDED PLASTIC PARTS |
| DIN EN ISO 4615:2000-05 | PLASTICS - UNSATURATED POLYESTERS AND EPOXIDE RESINS - DETERMINATION OF TOTAL CHLORINE CONTENT |
| DIN EN ISO 176:2005-05 | Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005) |
| DIN EN 1842:1997-11 | PLASTICS - THERMOSET MOULDING COMPOUNDS (SMC - BMC) - DETERMINATION OF COMPRESSION MOULDING SHRINKAGE |
| DIN EN ISO 20200:2016-05 | Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2015) |
| DIN CEN/TS 16137;DIN SPEC 91236:2011-07 | PLASTICS - DETERMINATION OF BIO-BASED CARBON CONTENT |
| DIN EN ISO 11357-6:2013-04 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008) |
| DIN EN ISO 6721-2:2008-09 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 2: TORSION-PENDULUM METHOD |
| DIN EN ISO 6721-1:2011-08 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| DIN EN ISO 11357-1:2016-05 (Draft) | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES (ISO 11357-1:2016) |
| DIN EN ISO 1675:1998-10 | Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985) |
| DIN SPEC 7700:2015-02 | DETERMINATION OF THE ULTIMATE ANOXIC BIODEGRADABILITY OF PLASTIC MATERIALS IN AN AQUEOUS SYSTEM - METHOD BY MEASUREMENT OF PRESSURE INCREASE |
| DIN EN ISO 62:2008-05 | PLASTICS - DETERMINATION OF WATER ABSORPTION |
| DIN EN ISO 1265:2007-05 | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007) |
| DIN EN ISO 1110:1998-03 | PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS |
| DIN EN ISO 13468-1:1997-01 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
| DIN EN ISO 11357-4:2014-10 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| DIN 54802-1:2015-07 | TESTING OF PLASTICS - DETERMINATION OF PLASTICIZER SORPTION AND RATE OF PLASTICIZER SORPTION IN THE HEAT OF VINYL CHLORIDE (VC) POLYMERS - PART 1: PLANETARY MIXER METHOD |
| DIN EN ISO 3451-1:2008-11 | PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS |
| DIN EN ISO 3915:1999-10 | Measurement of resistivity of conductive plastics (ISO 3915:1981) |
| DIN EN 1238:2011-07 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| DIN EN ISO 11357-5:2014-07 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 5: DETERMINATION OF CHARACTERISTIC REACTION-CURVE TEMPERATURES AND TIMES, ENTHALPY OF REACTION AND DEGREE OF CONVERSION (ISO 11357-5:2013) |
| DIN EN ISO 4892-3:2016-10 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 4892-3:2016) |
| DIN EN ISO 11357-7:2015-12 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015); German version EN ISO 11357-7:2015 |
| DIN EN ISO 9396:2001-02 | PLASTICS - PHENOLIC RESINS - DETERMINATION OF THE GEL TIME OF RESOLS UNDER SPECIFIC CONDITIONS USING AUTOMATIC APPARATUS |
| DIN EN ISO 22088-5:2009-10 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006) |
| DIN EN ISO 1133-1:2012-03 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| DIN EN ISO 11357-2:2014-07 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| DIN EN ISO 3451-5:2002-10 | PLASTICS - DETERMINATION OF ASH - PART 5: POLY(VINYL CHLORIDE) |
| DIN ISO 9944:1992-06 | PLASTICS - PHENOLIC RESINS - DETERMINATION OF ELECTRICAL CONDUCTIVITY OF RESIN EXTRACTS |
| DIN EN ISO 4614:2000-05 | PLASTICS - MELAMINE-FORMALDEHYDE MOULDINGS - DETERMINATION OF EXTRACTABLE FORMALDEHYDE |
| DIN EN ISO 119:1998-10 | Plastics - Phenol-formaldehyde mouldings - Determination of free phenols; Iodometric method (ISO 119:1977); German version EN ISO 119:1998 |
| DIN EN 16465:2015-12 | PLASTICS - METHODS FOR THE CALIBRATION OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| DIN 54802-2:2015-07 | TESTING OF PLASTICS - DETERMINATION OF PLASTICIZER SORPTION AND RATE OF PLASTICIZER SORPTION IN THE HEAT OF VINYL CHLORIDE (VC) POLYMERS - PART 2: STATICAL METHOD |
| DIN 53477:1992-11 | TESTING OF PLASTICS; DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF MOULDING MATERIALS BY DRY SIEVING ANALYSIS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.