DIN IEC 60326-3:1993-09

Name: DIN IEC 60326-3:1993-09
Brand: DIN

Withdrawn

PRINTED BOARDS - PART 3: DESIGN AND USE OF PRINTED BOARDS

Withdrawn date

01-01-2009

Published date

12-01-2013

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

Vorwort
Einleitung zu IEC 326-3
Einleitung zu IEC 326-3A
1 Einführung
2 Anwendungsbereich
3 Zweck
4 Werkstoffe und Oberflächen
  4.1 Werkstoffe
  4.2 Oberflächen
5 Zusammenbau
6 Masse
  6.1 Aussenmasse von Leiterplatten
  6.2 Dicke der Leiterplatten
  6.3 Lochdurchmesser
  6.4 Masse von Kerben und Ausschnitten
  6.5 Leitermasse
  6.6 Mass-Stabilität (in Vorbereitung)

Contains fundamental information on the design and the application of printed boards, their technical limitations and the main characteristics which can normally be obtained and expected. This standard is intended to be used for guidance to the designer and the user of printed boards.

DevelopmentNote	Supersedes DIN 40803-1 (02/2003)
DocumentType	Standard
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Withdrawn
Supersedes	DIN 40803-1:1972-11

Standards	Relationship
IEC 60326-3:1991	Identical

DIN 41652-7:1989-10 (Draft)	RACK & PANEL CONNECTORS, TRAPEZOIDAL, ROUND CONTACTS DIAMETER 1 MM - DIMENSIONS OF TYPE E - PRESS-IN TECHNIQUE
VDE 0116 : 1989	ELECTRICAL EQUIPMENT OF FURNACES
DIN VDE 0116 : 1989	ELECTRICAL EQUIPMENT OF FURNACES
DIN 41626-1:1989-10	SPECIAL CONTACTS FOR MULTI TWO-PART CONNECTORS; CONTACTS FOR HIGH CURRENT (TYPE H); DIMENSIONS, RATINGS, REQUIREMENTS, TESTS
DIN 41612-1:1988-01	TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; COMMON MOUNTING FEATURES, SURVEY OF TYPES
VDI/VDE 2251 Blatt 3:1998-09	Precision engineering components - Solder connections
VDE 0804 : 1989 AMD 1 1992	TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS
DIN EN 60603-2:2006-04	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2.54 MM (0.1 IN) WITH COMMON MOUNTING FEATURES
DIN 41617-1:1989-09	TWO-PART CONNECTORS FOR PRINTED BOARDS, GRID 2.5 MM - COMMON MOUNTING FEATURES, SURVEY OF TYPES - DIMENSIONS OF TYPE L, M, N & S
DIN EN 60603-9:1998-07	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 9: TWO-PART CONNECTORS FOR PRINTED BOARDS, BACKPANELS AND CABLE CONNECTORS, BASIC GRID OF 2,54 MM (0,1 IN)
DIN EN 60603-8:1998-07	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 8: TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,54 MM (0,1 IN), WITH SQUARE MALE CONTACTS OF 0,63 MM X 0,63 MM
DIN EN 123400:1992-11	SECTIONAL SPECIFICATION; FLEXIBLE PRINTED BOARDS WITHOUT THROUGH CONNECTIONS
DIN EN 123500:1992-11	SECTIONAL SPECIFICATION; FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS
DIN 41651-1:1989-09	TWO-PART CONNECTORS FOR PRINTED BOARDS FOR CONNECTION OF FLAT CABLES WITH ROUND CONDUCTORS; GRID 2,54 MM (0,1 IN); COMMON FEATURES, DIMENSIONS OF TYPE A AND B
DIN 41626-2:1989-10	SPECIAL CONTACTS FOR MULTI TWO-PART CONNECTORS; CONCENTRIC CONTACTS (TYPE C); DIMENSIONS, RATINGS, REQUIREMENTS, TESTS