EI 1540 : 2014
Current
Current
The latest, up-to-date edition.
DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-10-2014
Foreword
Acknowledgements
1 General
2 Depot location
3 Depot layout
4 Depot plant, fixed equipment and buildings
5 Fuel hydrant systems
6 Mobile fuelling and hydrant maintenance equipment
7 Fuelling hoses and hose assemblies
8 Equipment maintenance and testing
9 Health, safety, environment and security
10 Fire protection and emergency procedures
11 Training
12 Retail or consumer fuelling facilities
Annexes
Annex A - Glossary
Annex B - Bibliography
Annex C - Equipment/installation pre-conditioning prior to use
with aviation fuel
Annex D - List of abbreviations
Pertains to provide guidance for designers, constructors and commissioning operators of new build and refurbished fuelling facilities.
| DevelopmentNote |
Supersedes API 1500. (03/2004) PREVIOUSLY PUBLISHED JOINTLY BY API & EI, NOW ONLY PUBLISHED BY EI. (02/2011) Supersedes EI MODEL CODE SAFE PRACTICE PT7. (03/2011)
|
| DocumentType |
Standard
|
| ISBN |
9780852937082
|
| Pages |
136
|
| PublisherName |
Energy Institute (formerly Institute of Petroleum - IP)
|
| Status |
Current
|
| Supersedes |
| API 2003 REDLINE : 2008 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| API 1543 : 2009 | DOCUMENTATION, MONITORING AND LABORATORY TESTING OF AVIATION FUEL DURING SHIPMENT FROM REFINERY TO AIRPORT |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| EI 1585 : 2013 | GUIDANCE IN THE CLEANING OF AVIATION FUEL HYDRANT SYSTEMS AT AIRPORTS |
| EI 1560 : 2013 | RECOMMENDED PRACTICE FOR THE OPERATION, INSPECTION, MAINTENANCE AND COMMISSIONING OF AVIATION FUEL HYDRANT SYSTEMS AND HYDRANT SYSTEM EXTENSIONS |
| EI 1592 : 2017 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC BULK WATER DETECTORS FOR USE IN AVIATION FUELLING |
| ICAO 9977 : 2012 | MANUAL ON CIVIL AVIATION JET FUEL SUPPLY |
| EI 1594 : 2014 | INITIAL PRESSURE STRENGTH TESTING OF AIRPORT FUEL HYDRANT SYSTEMS WITH WATER |
| BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
| IEE WIRING REGS : 16 ED | INSTITUTE OF ELECTRICAL ENGINEERS WIRING REGULATIONS |
| PD CLC/TR 50404:2003 | Electrostatics. Code of practice for the avoidance of hazards due to static electricity |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API/EI 545-A : 2009 | VERIFICATION OF LIGHTNING PROTECTION REQUIREMENTS FOR ABOVE GROUND HYDROCARBON STORAGE TANKS |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| PD CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide |
| API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| NACE SP 01 88 : 2006 | DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| ISO 1825:2010 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification |
| EN 62305-4:2011/AC:2016 | PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010) |
| BS 2C 13:1988 | Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series) |
| EI 1584 : 2017 | FOUR-INCH HYDRANT SYSTEM COMPONENTS AND ARRANGEMENTS |
| EEMUA 107 : 1992 | RECOMMENDATIONS FOR THE PROTECTION OF DIESEL ENGINES FOR USE IN ZONE 2 HAZARDOUS AREAS |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EI 1590 : 2014 | SPECIFICATIONS AND QUALIFICATION PROCEDURES FOR AVIATION FUEL MICROFILTERS |
| EI Model Code of Safe Practice Part 16:2017 | MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| EI 1596 : 2013 | DESIGN AND CONSTRUCTION OF AVIATION FUEL FILTER VESSELS |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| SAE AS 5877 : 2016 | DETAILED SPECIFICATION FOR AIRCRAFT PRESSURE REFUELING NOZZLE |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| ISO 102:1990 | Aircraft — Gravity filling orifices |
| EI 1583 : 2010 | LABORATORY TESTS AND MINIMUM PERFORMANCE LEVELS FOR AVIATION FUEL FILTER MONITORS |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| FAA AC 150/5300-13 : 2008 | AIRPORT DESIGN |
| DEFSTAN 91-90/1(1996) : 1996 | GASOLINE, AVIATION: GRADES 80/87, 100/130 AND 100/130 LOW LEAD - JOINT SERVICE DESIGNATION: AVGAS 80, AVGAS 100 AND AVGAS 100LL |
| EN 13923:2005 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| EEMUA 159 : 2014 | ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
| EN 10253-4:2008/AC:2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 62305-4:2011/AC:2016-11 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| JIG 1 : ISSUE 11 | AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR INTO-PLANE FUELLING SERVICES |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| BS 5842:1980 | Specification for thermoplastic hose assemblies for dock, road and tanker use |
| EI Model code of safe practice Part 15:2015 | MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS |
| EI 1542 : 2012 | IDENTIFICATION MARKINGS FOR DEDICATED AVIATION FUEL MANUFACTURING AND DISTRIBUTION FACILITIES, AIRPORT STORAGE AND MOBILE FUELLING EQUIPMENT |
| CAA CAP 748 : 2004 | AIRCRAFT FUELLING AND FUEL INSTALLATION MANAGEMENT |
| DEFSTAN 91-91/7(2011) : 2011 | TURBINE FUEL, KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| EI MODEL CODE SAFE PRACTICE PT2 : 3ED 2013 | DESIGN, CONSTRUCTION AND OPERATION OF PETROLEUM DISTRIBUTION INSTALLATIONS |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| EI 1582 : 2011 | SPECIFICATION FOR SIMILARITY FOR EI 1581 AVIATION JET FUEL FILTER/WATER SEPARATORS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| DEFSTAN 80-97/5(2012) : 2012 | PAINT, SYSTEM, FOR THE INTERIOR OF BULK FUEL TANKS AND FITTINGS, MULTI-PACK |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| EN 12285-2 : 2005 | WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| ISO 9001:2015 | Quality management systems — Requirements |
| EI RISK ASSESSMENT FOR PETROLEUM PRODUCT : 2013 | GUIDANCE ON RISK ASSESSMENT AND CONCEPTUAL DESIGN OF TERTIARY CONTAINMENT SYSTEMS FOR BULK STORAGE OF PETROLEUM, PETROLEUM PRODUCTS, OR OTHER FUELS |
| SAE AS 1852 : 2006(S2012) | NOZZLES AND PORTS - GRAVITY FUELING INTERFACE STANDARD FOR CIVIL AIRCRAFT |
| DEFSTAN 91-87/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| JIG 2 : ISSUE 11 | AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR AIRPORT DEPOTS & HYDRANTS |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| EI 1560 : 2013 | RECOMMENDED PRACTICE FOR THE OPERATION, INSPECTION, MAINTENANCE AND COMMISSIONING OF AVIATION FUEL HYDRANT SYSTEMS AND HYDRANT SYSTEM EXTENSIONS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| EN 12285-1:2003 | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EI 1585 : 2013 | GUIDANCE IN THE CLEANING OF AVIATION FUEL HYDRANT SYSTEMS AT AIRPORTS |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| EI HM 20 : 2013 | PROVING OF AVIATION FUELLING POSITIVE DISPLACEMENT METERS |
| EI MODEL CODE SAFE PRACTICE PT19 : 2012 | FIRE PRECAUTIONS AT PETROLEUM REFINERIES AND BULK STORAGE INSTALLATIONS |
| SAE ARP 5818 : 2015 | AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 8995-1:2002 | Lighting of work places Part 1: Indoor |
| EN 14161:2011+A1:2015 | Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
| EI MODEL CODE SAFE PRACTICE PT21 : 3ED 2013 | MODEL CODE OF SAFE PRACTICE - PART 21: GUIDELINES FOR THE CONTROL OF HAZARDS ARISING FROM STATIC ELECTRICITY |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| SAE ARP 5918 : 2006 | STANDARD TEST CRITERIA FOR AIRCRAFT REFUELERS |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
$375.88
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.