EI Model code of safe practice Part 15:2015
Current
The latest, up-to-date edition.
MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
Hardcopy , PDF
English
01-07-2015
Foreword
Key technical changes
Acknowledgements
Overview
1 Introduction
2 The technique of area classification
3 The point source approach for classification of individual
sources of release
4 Effect of ventilation on area classification
Annexes
Annex A - Classification and categorisation of petroleum and
flammable fluids
Annex B - Area classification for hydrogen
Annex C - Calculation of hazard radii
Annex D - The direct example approach for classification of common
facilities in open areas
Annex E - Small-scale operations (laboratories and pilot plants)
Annex F - Background and examples on ventilation of enclosed areas,
releases within enclosed areas and associated external
hazardous areas
Annex G - Glossary
Annex H - References
This Model Code gives guidance on the classification of areas around equipment handling or storing flammable fluids, and provides a basis for both the correct selection of fixed electrical equipment and the location of other sources of ignition in those areas.
DocumentType |
Standard
|
ISBN |
9780852937174
|
Pages |
169
|
PublisherName |
Energy Institute (formerly Institute of Petroleum - IP)
|
Status |
Current
|
Supersedes |
BS EN ISO 15138:2007 | Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning |
NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
I.S. EN ISO 15138:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
EI 1560 : 2013 | RECOMMENDED PRACTICE FOR THE OPERATION, INSPECTION, MAINTENANCE AND COMMISSIONING OF AVIATION FUEL HYDRANT SYSTEMS AND HYDRANT SYSTEM EXTENSIONS |
EI 1592 : 2017 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC BULK WATER DETECTORS FOR USE IN AVIATION FUELLING |
CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
C22.10-10 | Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments |
EEMUA 159 : 2014 | ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
BS 5908-1:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises |
EN ISO 15138:2007 | Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) |
EI RR. AVIATION FUEL. HAZA. AREA CLASS. : 2017 | EI RESEARCH REPORT - AVIATION FUELLING HAZARDOUS AREA CLASSIFICATION |
EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
EI MODEL CODE SAFE PRACTICE PT7 : 1998 | DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES |
EI Model Code of Safe Practice Part 16:2017 | MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING |
EI TP PETROLEUM ROAD TANKER : 2010 | PETROLEUM ROAD TANKER DESIGN AND CONSTRUCTION |
C22.1-18 | Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations |
EI Model Code of Safe Practice Part 11:2005 | BITUMEN SAFETY CODE |
IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
BS EN 60079-19 : 2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
ISO 15649:2001 | Petroleum and natural gas industries — Piping |
BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
PD CLC/TR 50404:2003 | Electrostatics. Code of practice for the avoidance of hazards due to static electricity |
PD CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide |
IEC TR 60079-20:1996 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
BS EN 50272-1:2010 | Safety requirements for secondary batteries and battery installations General safety information |
IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
BS EN 1834-1:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres |
EI Model Code of Safe Practice Part 16:2017 | MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING |
BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
IEC 61892-7:2014 | Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas |
BS EN 60079-15:2010 | Explosive atmospheres Equipment protection by type of protection \'n\' |
BS EN 60079-6:2007 | Explosive atmospheres Equipment protected by oil immersion \'o\' |
BS EN 60079-18 : 2015 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
BS EN 1755:2015 | Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres |
IEC 61892-5:2014 | Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units |
BS EN 60079-2:2014 | Explosive atmospheres Equipment protection by pressurized enclosure \'p\' |
IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
BS EN 60079-5:2015 | Explosive atmospheres Equipment protection by powder filling \'q\' |
API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
BS EN 60079-7 : 2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
IMO IA811 : 2001 | MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
BS EN 60079-29-1:2007 | Explosive atmospheres Gas detectors. Performance requirements of detectors for flammable gases |
BS EN 60079-17:2014 | Explosive atmospheres Electrical installations inspection and maintenance |
IEC 61892-3:2012 | Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
ISO 21789:2009 | Gas turbine applications — Safety |
BS EN 60079-26:2015 | Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga |
EI MODEL CODE SAFE PRACTICE PT2 : 3ED 2013 | DESIGN, CONSTRUCTION AND OPERATION OF PETROLEUM DISTRIBUTION INSTALLATIONS |
EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
BS EN 161 : 2011 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
IEC 61892-1:2015 | Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions |
IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
IEC 60092-502:1999 | Electrical installations in ships - Part 502: Tankers - Special features |
IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
BS EN 60079-11:2012 | Explosive atmospheres Equipment protection by intrinsic safety \'i\' |
IEC 61892-6:2013 | Mobile and fixed offshore units - Electrical installations - Part 6: Installation |
IEC TR 60079-12:1978 | Electrical apparatus for explosive gas atmospheres - Part 12:Classification of mixtures of gases of vapours with air accordingto their maximum experimental safe gaps and minimum ignitingcurrents |
BS EN 1834-2:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
EI MODEL CODE SAFE PRACTICE PT19 : 2012 | FIRE PRECAUTIONS AT PETROLEUM REFINERIES AND BULK STORAGE INSTALLATIONS |
IEC 60623:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells |
IP STANDARD METHODS : 76ED 2017 | IP STANDARD TEST METHODS FOR ANALYSIS AND TESTING OF PETROLEUM AND RELATED PRODUCTS, AND BRITISH STANDARD 2000 PARTS, 2017 |
ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
IEC 60079-26:2014 RLV | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
EI MODEL CODE SAFE PRACTICE PT21 : 3ED 2013 | MODEL CODE OF SAFE PRACTICE - PART 21: GUIDELINES FOR THE CONTROL OF HAZARDS ARISING FROM STATIC ELECTRICITY |
EI BLUE BOOK : 3ED 2011 | DESIGN, CONSTRUCTION, MODIFICATION, MAINTENANCE AND DECOMMISSIONING OF FILLING STATIONS |
EI TP PETROLEUM ROAD TANKER : 2010 | PETROLEUM ROAD TANKER DESIGN AND CONSTRUCTION |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.