EN 10027-1:2016
Current
Current
The latest, up-to-date edition.
Designation systems for steels - Part 1: Steel names
Published date
26-10-2016
Publisher
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
5 Reference to product standards
6 Classification of steel names
7 Structure of steel names
1.1This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, so as to provide an abbreviated identification of steels.NOTEIn the English language the designations covered by this European Standard are known as “steel names”; in the French language as “designation symbolique”; in the German language as “Kurznamen”.1.2This European Standard applies to steels specified in European Standards (EN), Technical Specifications (TS), Technical Reports (TR) and CEN member's national standards.1.3These rules may be applied to non-standardized steels.1.4A system of numerical designation of steels known as steel numbers is specified in EN 10027 2.
| Committee |
CEN/TC 459/SC 12
|
| DevelopmentNote |
Supersedes NS 10000 (07/2004) Supersedes CR 10260. (10/2005) Supersedes PREN 10027-1. (11/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 10027-1 : 2016 | Identical |
| NS EN 10027-1 : 1992 | Identical |
| NBN EN 10277-1 : 2008 | Identical |
| UNI EN 10027-1 : 2006 | Identical |
| BS EN 10027-1:2016 | Identical |
| NBN EN 10027-1 : 2005 | Identical |
| SS-EN 10027-1:2016 | Identical |
| UNE-EN 10027-1:2017 | Identical |
| NEN EN 10027-1 : 2016 | Identical |
| UNI EN 10027-1:2016 | Identical |
| PN EN 10027-1 : 2016 | Identical |
| DIN EN 10027-1:2017-01 | Identical |
| I.S. EN 10027-1:2016 | Identical |
| NBN EN 10083-1 : 2007 | Identical |
| NBN EN 10083-1 : 2007 | Corresponds |
| NF EN 10027-1 : 2017 | Identical |
| DIN EN 10027-1:2016-02 (Draft) | Identical |
| DIN EN 10027-1:1992-09 | Identical |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| 14/30301257 DC : 0 | BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| UNE-EN 14811:2007 | Railway applications - Track - Special purpose rail - Grooved and associated construction |
| UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| UNE-EN 10343:2010 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| BS ISO 11972:2015 | Corrosion-resistant cast steels for general applications |
| BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
| 08/30180856 DC : DRAFT JUNE 2008 | BS EN 10270-3 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| DIN EN 10152:2009-07 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10338:2015-10 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| PREN 10217-6 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10169-2:2006 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| I.S. EN 10016-1:1995 | NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 1: GENERAL REQUIREMENTS |
| BS ISO 4991:2015 | Steel castings for pressure purposes |
| 11/30239476 DC : 0 | BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| 09/30207517 DC : 0 | BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| BS EN 10294-2:2012 | Hollow bars for machining. Technical delivery conditions Stainless steels with specified machinability properties |
| 12/30259226 DC : 0 | BS EN 10107 - GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| I.S. EN 10213-1:1996 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 10341:2006 | COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| I.S. EN 10126:1996 | COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| I.S. EN 10292:2007 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 4632-003 : 2011 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| BS EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| PREN 10207 : DRAFT 2015 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| 04/100723 DC : DRAFT JAN 2004 | EN 10213 - STEEL CASTINGS FOR PRESSURE PURPOSES |
| DIN EN 15583-2:2012-05 | Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| 16/30332611 DC : DRAFT JAN 2016 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| DIN EN 13674-4:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| I.S. EN 10025-2:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| 08/30190326 DC : DRAFT DEC 2008 | BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| 06/30146724 DC : 0 | EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| EN 10085:2001 | Nitriding steels - Technical delivery conditions |
| 15/30325000 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| BS ISO 14737:2015 | Carbon and low alloy cast steels for general applications |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| 09/30207508 DC : 0 | BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| 13/30280398 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 14811 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION |
| BS EN 10343:2009 | Steels for quenching and tempering for construction purposes. Technical delivery conditions |
| 11/30239488 DC : 0 | BS EN 10025-6 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS |
| DIN EN 10025-4:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 04/30123264 DC : DRAFT OCT 2004 | EN 10341 - COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| 06/30148769 DC : 0 | EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS |
| DIN EN 14811:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| TR 4858 : 2018 | AEROSPACE SERIES - PIPE COUPLINGS MATERIALS AND SURFACE TREATMENTS |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| BS EN 10253-4:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| TR 3775 : 4 | AEROSPACE SERIES - BOLTS AND PINS - MATERIALS |
| PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 4500-6 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 6: SPECIFIC RULES FOR FILLER METALS FOR BRAZING |
| I.S. EN 10217-3:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| PREN 4632-003 : DRAFT 2008 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| PREN 4700-003 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 4700-006 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| PREN 10120 : DRAFT 2014 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| PREN 10027-2 : DRAFT 2013 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| PREN 10025-5 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| I.S. EN 10217-6:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10028-1 : DRAFT 2014 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 14811 E : 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| ISO 4991:2015 | Steel castings for pressure purposes |
| BS EN 10217-4:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
| BS EN 10283:2010 | Corrosion resistant steel castings |
| 16/30332605 DC : 0 | BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10025-6:2004+A1:2009 | Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| EN 10217-5:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NF EN 4700-007 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| DIN EN 14291 E : 2005 | FOAM PRODUCING SOLUTIONS FOR LEAK DETECTION ON GAS INSTALLATIONS |
| BS EN 10025-5:2004 | Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance |
| BS EN 10154:2002 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10250-1:1999 | Open steel die forgings for general engineering purposes General requirements |
| BS EN 10095 : 1999-07 | HEAT RESISTING STEELS AND NICKEL ALLOYS |
| UNE-EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10113-1:1993 | Hot-rolled products in weldable fine grain structural steels General delivery conditions |
| BS EN 10025-2:2004 | Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
| BS EN ISO 3452-3:2013 | Non-destructive testing. Penetrant testing Reference test blocks |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
| BS EN 15183:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| BS EN 10089:2002 | Hot rolled steels for quenched and tempered springs. Technical delivery conditions |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| BS EN 10214:1995 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10305-2:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
| BS EN 39:2001 | Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions |
| BS EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| BS EN 10205:2016 | Cold reduced tinmill products. Blackplate |
| BS EN 14291:2004 | Foam producing solutions for leak detection on gas installations |
| BS EN 10272:2007 | Stainless steel bars for pressure purposes |
| DIN EN 10296-1 E : 2004 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| BS EN 10027-2:2015 | Designation systems for steels Numerical system |
| UNE-EN 10106:2016 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10025-3:2004 | Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| BS EN 10249-1:1996 | Cold formed sheet piling of non alloy steels Technical delivery conditions |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods) |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| BS EN 1993-5:2007 | Eurocode 3. Design of steel structures Piling |
| I.S. EN 10084:2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10083-2:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 10305-2:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| I.S. EN 10216-4:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10120:2017 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN 10222-1:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
| I.S. EN 10106:2015 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| DIN EN 10025-5:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| EN 10277-1:2008 | Bright steel products - Technical delivery conditions - Part 1: General |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10248-1:1995 | Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10253-4:2008/AC:2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 1255:1995 | Inland navigation vessels - Swing derricks |
| EN 10113-2 : 1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 10113-3 : 1993 | HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |
| EN 10224:2002/A1:2005 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10268:2006+A1:2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10271:1998 | Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10249-1:1995 | Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| DIN EN 14811:2019-06 | Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019 |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| DIN EN 10292:2007-06 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10312:2002/A1:2005 | WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10294-1:2005 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| EN 10297-2:2005/AC:2007 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10296-2:2005/AC:2007 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 10025-4:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 10205:2017-03 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 10025-6:2009-08 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10213-1 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| EN 10016-1:1994 | Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
| EN 10214 : 1995 | CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10165 : 1995 | COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| I.S. EN 10248-1:1996 | HOT ROLLED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| PREN 10025-3 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| NFL 06 383 : A2006 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - RESISTANCE SPOT OR SEAM WELDED ASSEMBLIES - QUALITY OF WELDED ASSEMBLIES |
| UNI EN 15583-2 : 2012 | WINTER MAINTENANCE EQUIPMENT - SNOW PLOUGHS - PART 2: TESTING CRITERIA AND THEIR REQUIREMENTS |
| 02/713774 DC : DRAFT DEC 2002 | EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| I.S. EN 10165:1996 | COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| I.S. EN 10208-2:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| 13/30280395 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10213:2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 1993-5:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX) |
| 12/30270633 DC : 0 | BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 11/30239494 DC : 0 | BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| 11/30253751 DC : 0 | BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 10025-6:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| CEI EN 62474 : 2013 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| PREN 10219-1 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| 15/30327671 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| 98/712789 DC : DRAFT AUG 98 | PREN 10302 - CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 15/30324994 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 07/30127452 DC : DRAFT AUG 2007 | BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| PREN 13674-1 : DRAFT 2009 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| 96/700090 DC : 0 | PREN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS |
| PREN 10139 : DRAFT 2013 | COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| NF EN 4700-005 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 17/30365666 DC : 0 | BS EN 62474 - MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| 03/103470 DC : DRAFT FEB 2003 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 09/30207501 DC : 0 | BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions |
| BS EN 13674-2 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PREN 10217-4 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| 05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10025-6:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| I.S. EN 2032-001:2014 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| PREN 10283 : DRAFT 2009 | CORROSION RESISTANT STEEL CASTINGS |
| NF EN 10283 : 2010 | CORROSION RESISTANT STEEL CASTINGS |
| 01/708775 DC : DRAFT MAY 2001 | PREN 10297-2 - SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| PREN 10210-1 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| PREN 4700-004 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| DIN EN 10025-3:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| BS EN 10025-4:2004 | Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| I.S. EN 10217-4:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| I.S. EN 10217-5:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NF EN 14811 : 2006 + A1 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| EN 10217-2:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10217-3 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| BS EN 10025-6:2019 | Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| DIN EN 10217-6:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10106 : DRAFT 2013 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| NF EN 4700-002 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10217-1:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 13674-2:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| I.S. EN 50112:1995 | MEASUREMENT, CONTROL, REGULATION - ELECTRICAL TEMPERATURE SENSORS - METAL PROTECTING TUBES FOR TC ASSEMBLIES |
| I.S. EN 14811:2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| IEC PAS 61906:2005 | Procedure for the declaration of materials in products of the electrotechnical and electronic industry |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| ISO 14737:2015 | Carbon and low alloy cast steels for general applications |
| DIN EN 10297-1 E : 2003 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 10297-2 E : 2006 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| DIN EN 10305-4 E : 2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10305-6:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN ISO 3452-3:2014-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| DIN EN 10302:2008-06 | Creep resisting steels, nickel and cobalt alloys |
| UNE-EN 10120:2018 | Steel sheet and strip for welded gas cylinders |
| DIN EN 15183 E : 2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 10296-2 : 2007-06 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 10297-2:2006-02 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| DIN EN 10130 : 2007-04 | COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
| UNE-EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| UNE-EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| UNE-EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| BS EN 10155:1993 | Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions |
| DIN EN 10305-3:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| UNI EN ISO 3452-3 : 2014 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS |
| BS EN 10215:1995 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions |
| UNE-EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| UNE-EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 1255:1995 | INLAND NAVIGATION VESSELS - SWING DERRICKS |
| I.S. EN 10305-5:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| I.S. EN 10216-1:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 13674-3:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| I.S. EN 10273:2016 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 10305-6:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10130:2006 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10208-2:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| I.S. EN 10152:2017 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 13674-1:2011-04 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 13674-1:2017-07 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 10296-2:2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| I.S. EN 10209:2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10027-2:2015-07 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 13160-3:2016 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| I.S. EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| DIN EN 10208-1:1998-02 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| I.S. EN 10205:2016 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 10210-1:2006-07 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| DIN EN 10169-3:2003-09 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| DIN EN 10213-1:1996-01 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10169-2:2006-07 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| S.R. CEN/TR 17144:2017 | RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS |
| I.S. EN ISO 3452-3:2013 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 10270-3:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| DIN EN 10169-1:2004-04 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 10149-1:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10269:2013 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 10219-1:2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 10272:2016&LC:2016 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 10305-4:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10268:2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10210-1:2006 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10305-1:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN 502:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| I.S. EN 10305-3:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| DIN EN 10083-3:2007-01 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| I.S. EN 13674-1:2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 10277-1:2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10277-1:2008-06 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 10255:2004 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10111:2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10107:2014 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| I.S. EN 10302:2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10111 : 2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 502 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| UNI EN 10149-1 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| 07/30164802 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| PREN 10305-5 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| 11/30239491 DC : 0 | BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| NFL 06 380-21 : 2003 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| 03/306637 DC : DRAFT APR 2003 | EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: FLAT BOTTOM SYMMETRICAL RAILWAY RAILS FROM 27 KG/M TO 46 KG/M |
| 11/30239479 DC : 0 | BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| I.S. EN 10169-1:2004 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| 12/30259888 DC : 0 | BS EN ISO 3452-3 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS |
| 10/30239357 DC : 0 | BS EN 4500-3 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 3: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| I.S. EN 10326:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| BS EN 10253-3:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| BS ISO 11973:2015 | Heat-resistant cast steels and alloys for general applications |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 13/30286664 DC : 0 | BS EN 10139 - COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 10346:2015-10 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| DIN EN 10205:1992-01 | COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
| 12/30264373 DC : 0 | BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| UNE-EN 10338:2016 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| 09/30201490 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| 16/30343615 DC : 0 | BS ISO 14955-4 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 4: PRINCIPLES FOR MEASURING METAL-FORMING MACHINE TOOLS AND LASER PROCESSING MACHINE TOOLS WITH RESPECT TO ENERGY EFFICIENCY |
| 09/30207511 DC : 0 | BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| 15/30325003 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
| DIN EN 10294-2 E : 2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| PREN 10025-4 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| NFL 09-752 : E2004 | METALLIC MATERIALS - CODES FOR STANDARD ITEM PART NUMBERS |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10253-4:2008-06 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 13/30288198 DC : 0 | BS EN 10106 - COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| ISO 19960:2015 | Cast steels and alloys with special physical properties |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| PREN 10209 : DRAFT 2010 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| 14/30312176 DC : 0 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| 13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| UNE-EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| 99/712245 DC : DRAFT AUG 1999 | PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS |
| 11/30239482 DC : 0 | BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| 99/701054 DC : DRAFT JAN 1999 | PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| 13/30288575 DC : 0 | BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 09/30207514 DC : 0 | BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 15583-2:2012 | Winter maintenance equipment. Snow ploughs Testing criteria and their requirements |
| 13/30286145 DC : 0 | BS EN 10027-2 - DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| 01/715451 DC : DRAFT NOV 2001 | PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| BS ISO 13583-2:2015 | Centrifugally cast steel and alloy products Heat-resistant materials |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| NF EN 4700-006 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| 05/30131376 DC : DRAFT MAR 2005 | BS EN 15183 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST |
| 15/30324997 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 00/713959 DC : DRAFT SEP 2000 | PREN 10138-3 - PRESTRESSING STEELS - PART 3: STRAND |
| 09/30207521 DC : 0 | BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 09/30185992 DC : 0 | BS EN 13674-1 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PREN 10222-1 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| PREN 10107 : DRAFT 2012 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| PREN 10305-6 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 03/306635 DC : DRAFT APR 2003 | EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PD 6622:1998 | Designation systems for steel. Additional symbols |
| 05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10085:2001 | NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10083-3 : 2006-08 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| XP PREN 4500-6 : 1997 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 6: SPECIFIC RULES FOR FILLER METALS FOR BRAZING |
| UNI EN 10253-4 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| PREN 2032-001 : 200P5 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| UNE-EN 13674-4:2007 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| NF EN 4632-003 : 2010 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 14420-4 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| NF EN 4700-003 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| I.S. EN 10294-2:2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| I.S. EN 10217-1:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNI EN 13674-4 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| EN 10217-3:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10025-3:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| UNE-EN 10205:2017 | Cold reduced tinmill products - Blackplate |
| I.S. EN 4632-003:2010 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| DIN EN 10217-5:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10217-7 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 10217-3:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| EN 13674-4:2006+A1:2009 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| PREN 10025-2 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| XP PREN 4500-3 : 1997 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 3: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. ENV 10169-2:1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| BS EN 10217-6:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| PREN 10255 : DRAFT 2010 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10225:2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| DIN EN 14532-2:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN 10083-1:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10132-1:2000 | COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNE-EN 10208-1:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
| DIN EN 10089:2003-04 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| UNI EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 13674-1 : 2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| BS EN 10213-1:1996 | Technical delivery conditions for steel castings for pressure purposes General |
| DIN EN 10305-2:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
| BS EN 10305-5:2010 | Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10113-2:1993 | Hot-rolled products in weldable fine grain structural steels Delivery conditions for normalized/normalized rolled steels |
| DIN EN 10296-2 E : 2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| BS EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| BS EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions |
| BS EN 1503-1:2000 | Valves. Materials for bodies, bonnets and covers Steels specified in European Standards |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products Products for building interior applications |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10216-4:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| DIN EN 10305-5:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| UNE-EN 10225:2010 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 15583-2:2012 | Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements |
| EN 1993-5:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| EN ISO 3452-3:2013 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| UNI EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| UNI EN 10107 : 2014 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| UNI EN 10269 : 2013 | Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
| UNI EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10268 : 2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10250-1 : 2001 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS |
| UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| UNI EN 10219-1 : 2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 1559-2 : 2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| UNI EN 10255 : 2007 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| UNI EN 10208-1 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| UNI EN 13674-3 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| UNI EN 10216-4 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNI EN 10216-1 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNI EN 10084 : 2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10302 : 2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10209 : 2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10216-3 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNI EN 14420-5 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 10250-1:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 14420-4 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| DIN EN 10149-1:2013-12 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 03/103468 DC : DRAFT FEB 2003 | BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| I.S. EN 10087:1999 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS |
| I.S. EN 10083-1:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| BS EN 4632-003:2010 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| I.S. EN 10327:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 39:2001 | LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10154:2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| ISO 13583-2:2015 | Centrifugally cast steel and alloy products — Part 2: Heat-resistant materials |
| PREN 10205 : DRAFT 2014 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| I.S. EN 10336:2007 | CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 02/704945 DC : DRAFT APR 2002 | PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| 03/108196 DC : 0 | EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 10152:2015-10 (Draft) | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 03/105795 DC : DRAFT APR 2003 | EN 10107 - GRAIN-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN FULLY PROCESSED STATE |
| 08/30182454 DC : DRAFT JULY 2008 | BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| DD IEC PAS 61906 : DRAFT DEC 2005 | PROCEDURE FOR THE DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONIC INDUSTRY |
| 09/30163217 DC : DRAFT JULY 2009 | BS EN 10283 - CORROSION RESISTANT STEEL CASTINGS |
| PREN 13674-4 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| DIN EN 10139:2016-06 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| UNI EN 10343 : 2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| 12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| 14/30301272 DC : 0 | BS EN 10205 - COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| BS EN 2032-001:2014 | Aerospace series. Metallic materials Conventional designation |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS EN 15272-3:2007 | Inland navigation vessels. Equipment for rope leading Roller fairleads |
| DIN EN 10210-1:2016-01 (Draft) | Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 14/30294825 DC : 0 | BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 09/30185794 DC : 0 | BS EN 10294-2 - HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS AND NICKEL ALLOYS WITH SPECIFIED MACHINABILITY PROPERTIES |
| DIN EN 10253-3:2009-02 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| 02/713103 DC : DRAFT NOV 2002 | PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| 05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| 15/30324991 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| 02/713544 DC : DRAFT NOV 2002 | EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10283:2010 | CORROSION RESISTANT STEEL CASTINGS |
| 00/713960 DC : 0 | PREN 10138-4 - PRESTRESSING STEELS - PART 4: BARS |
| 09/30201494 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| UNI EN 10294-2 : 2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| NF EN 4700-001 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| 01/708774 DC : DRAFT MAY 2001 | PREN 10296-2 - WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| NF EN 4700-004 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| BS DD214(1993) : 1993 | DESIGNATION SYSTEM FOR STEEL: ADDITIONAL SYMBOLS FOR STEEL NAMES (ECISS INFORMATION CIRCULAR 10) |
| BS EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
| DIN EN 15272-3:2008-02 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
| UNI EN 13674-2 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| UNI EN 15272-3 : 2008 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
| DIN 17465:1993-08 | HEAT RESISTING STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
| TR 3823 : 2 | AEROSPACE SERIES - MATERIALS FOR PLAIN, SLOTTED AND SELF-LOCKING BY PLASTIC RING HEXAGONAL NUTS |
| TR 3791 : 3 | AEROSPACE SERIES - MATERIALS FOR SELF-LOCKING NUTS, THREADED INSERTS AND SCREW THREAD INSERTS OF TEMPERATURE CLASSES <= 425 DEGREES C |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| DD ENV 10169-2:1999 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| TR 4661 : 2009 | AEROSPACE SERIES - HINGES, FLIGHT CONTROLS MATERIALS AND SURFACE TREATMENTS |
| PREN 10025-6 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS |
| UNE-EN 10213:2009 | Steel castings for pressure purposes |
| I.S. EN 10025-4:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| I.S. EN 10338:2015 | HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 15272-3:2007 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
| I.S. EN 15583-2:2012 | WINTER MAINTENANCE EQUIPMENT - SNOW PLOUGHS - PART 2: TESTING CRITERIA AND THEIR REQUIREMENTS |
| ISO 11972:2015 | Corrosion-resistant cast steels for general applications |
| I.S. EN 10207:2017 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| PREN 10269 : DRAFT 2011 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 10346:2015 | CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10217-3:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| EN 10217-4:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10273 : DRAFT 2013 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS ISO 19960:2015 | Cast steels and alloys with special physical properties |
| BS EN 10207:2017 | Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
| DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 62474:2012 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY (IEC 62474:2012 (EQV)) |
| DIN EN 10217-4:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. ENV 1993-5:1998 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| UNI EN 14811 : 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| PREN 13674-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PREN 502 : DRAFT 2012 | ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| NF EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 10268 : DRAFT 2002 | COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10217-6:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10270-3:2012-01 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| EN 10083-3:2006/AC:2008 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| EN 14811:2006+A1:2009 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| UNE-EN ISO 3452-3:2014 | Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
| I.S. EN 13674-4:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| I.S. EN 13674-2:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| NF EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10263-1:2017 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| UNE-EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| DIN EN 10255:2015-05 (Draft) | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10107:2014-07 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| DIN EN 10268:2013-12 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| UNE-EN 10208-2:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 10106:2016-03 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| DIN EN 10084:2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10225:2009-10 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| DIN EN 10085:2001-07 | Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| DIN EN 502:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| I.S. EN 10139:2016 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10255:2004 | Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
| BS EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| UNE-EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10084 : 2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10296-2:2005 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 502:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet |
| BS EN 10271:1999 | Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions |
| BS EN 10087 : 1999-01 | FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS |
| BS EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10336:2007 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions |
| BS EN 14532-2:2004 | Welding consumables. Test methods and quality requirements Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 10305-6:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| BS EN 13674-3 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| BS EN 10270-3:2011 | Steel wire for mechanical springs Stainless spring steel wire |
| UNE-EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| UNE-EN 13160-3:2017 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| BS EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10269:2014 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| UNE-EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| BS EN 10137-1:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions |
| IEC 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| BS EN 10305-3:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
| DIN EN 10294-1 E : 2005 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 1: NON ALLOY AND ALLOY STEELS |
| BS EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions |
| BS EN 10147:2000 | Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions |
| BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| BS EN 10142:2000 | Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions |
| BS EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions |
| BS EN 10305-1:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
| UNE-EN 10149-1:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| UNE-EN 10027-2:2016 | Designation systems for steels - Part 2: Numerical system |
| UNE-EN 10268:2007 | Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
| UNE-EN 10216-1:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| UNE-EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| UNE-EN 10270-3:2012 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| BS EN 10085 : 2001-05 | NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10297-2:2005 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
| DIN EN 10224:2005-12 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10292:2003-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| ENV 1993-5 : 1998 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| ENV 10169-2 : 1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| EN 14291:2004 | Foam producing solutions for leak detection on gas installations |
| EN 15272-3:2007 | Inland navigation vessels - Equipment for rope leading - Part 3: Roller fairleads |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 2032-001:2014 | Aerospace series - Metallic materials - Part 001: Conventional designation |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN 13674-3:2006+A1:2010 | Railway applications - Track - Rail - Part 3: Check rails |
| UNI EN 10277-1 : 2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 14532-2:2004 | Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
| EN 15183:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| EN 13674-2:2006+A1:2010 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| EN 4632-003:2010 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| UNE-EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10208-1:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| PREN 10263-1 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| 16/30258478 DC : 0 | BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| 07/30117697 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 98/705400 DC : DRAFT MAR 1998 | PREN 10025-2 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS |
| 10/30239363 DC : 0 | BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS |
| I.S. EN 10169-3:2003 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| 07/30159083 DC : DRAFT FEB 2007 | BS EN 10106 - COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| 14/30312182 DC : 0 | BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 09/30201486 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| 09/30201500 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED AND COLD SIZED SQUARE AND RECTANGULAR TUBES |
| UNI EN 10025-6 : 2009 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| PREN 10217-2 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 02/704946 DC : DRAFT APR 2002 | PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 14811 : 2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| 10/30234613 DC : DRAFT NOV 2010 | BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| 09/30207505 DC : 0 | BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| UNI EN 10283 : 2010 | CORROSION RESISTANT STEEL CASTINGS |
| 11/30239485 DC : 0 | BS EN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| DIN EN 10343:2009-07 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| 15/30331537 DC : 0 | BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| PD CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
| 01/715452 DC : DRAFT NOV 2001 | PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| UNI EN 2032-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| 10/30227692 DC : 0 | BS EN 10209 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| 10/30233309 DC : 0 | BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| 10/30201497 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10209:2013-09 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| 08/30182457 DC : DRAFT JULY 2008 | BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| 98/712958 DC : DRAFT AUG 1998 | PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 15/30324988 DC : 0 | BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 07/30164617 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 03/306636 DC : DRAFT APR 2003 | EN 13674-3 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| PREN 10217-5 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 05/30135488 DC : DRAFT JUN 2005 | EN 10292 ED 2 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 00/713958 DC : 0 | PREN 10138-2 - PRESTRESSING STEELS - PART 2: WIRE |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10025-5:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| I.S. EN 10025-5:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| UNI EN 10270-3 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10025-6 : 2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| 16/30258515 DC : 0 | BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 10343:2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| I.S. EN 10253-4:2008 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| ISO 11973:2015 | Heat-resistant cast steels and alloys for general applications |
| 16/30258472 DC : 0 | BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| DIN EN 14811 E : 2019 | Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019 |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 17/30353548 DC : 0 | BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10217-2:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| PREN 10338 : DRAFT 2013 | HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10149-1 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| EN 10283:2010 | Corrosion resistant steel castings |
| BS EN 13674-4 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10083-3:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 10253-3:2008 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 10213:2016-10 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| DIN EN 13674-3:2010-12 | Railway applications - Track - Rail - Part 3: Check rails (includes Amendment A1:2010) |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN EN 10083-1 E : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| BS EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| DIN EN 10296-1:2004-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| BS EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10294-1:2005 | Hollow bars for machining. Technical delivery conditions Non alloy and alloy steels |
| BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 10268 : 2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| UNE-EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN 10225:2009 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| BS EN 10113-3:1993 | Hot-rolled products in weldable fine grain structural steels Delivery conditions for thermomechanical rolled steels |
| BS EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions General |
| BS EN 10305-4:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10222-1:2017 | Steel forgings for pressure purposes General requirements for open die forgings |
| BS EN 10213 : 2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| BS EN 13160-3:2003 | Leak detection systems Liquid systems for tanks |
| BS EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| BS EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
| BS EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10277-1:2008 | Bright steel products. Technical delivery conditions General |
| BS EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions |
| DIN EN 10294-1:2005-12 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| BS EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions |
| DIN EN 10312:2005-12 | Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005 |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| DIN EN 10336:2007-07 | CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10216-4:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| EN 10336:2007 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions |
| EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| DIN EN 10326:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10255:2007-07 | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007) |
| DIN EN 10327:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 10137-1 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10296-2:2006-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| DIN EN 14291:2005-02 | Foam producing solutions for leak detection on gas installations; German version EN 14291:2004 |
| EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 10343:2009 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| DIN EN 10219-1:2006-07 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10126 : 1995 | COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| DIN EN 1993-5:2010-12 | Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009) |
| EN 10089:2002 | Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
| EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| EN 10154 : 2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10294-2:2012-04 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| DIN EN 10305-4:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 13674-2:2011-01 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| DIN EN 10111:2008-06 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 50112:1994 | Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| DIN EN 15183:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| DIN EN 10154:2002-08 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10341:2006-08 | COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| UNE-EN 13674-2:2007 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| UNE-EN 13674-3:2007 | Railway applications - Track - Rail - Part 3: Check rails |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| EN 10020:2000 | Definition and classification of grades of steel |
| AS ISO 3452.3:2020 | Non-destructive testing - Penetrant testing Reference test blocks |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.