Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 10131:2006 (edition 2)

Current
Current

The latest, up-to-date edition.

Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
Published date

12-07-2006

Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 Designation
5 Condition of delivery
6 Tolerances on thickness
7 Tolerances on width
   7.1 General
   7.2 Sheet and wide strip
   7.3 Slit wide strip of width less than 600 mm
8 Tolerances on length
9 Tolerances on flatness
   9.1 General
   9.2 Steel grades with specified minimum yield strength
       Re < 260 Mpa
   9.3 Steel grades with specified minimum yield strength
       260 MPa <= Re < 340 Mpa
   9.4 Steel grades with specified minimum yield strength
       Re >= 340 MPa
10 Tolerances on out-of-squareness
11 Tolerances on edge camber
12 Superimposition of dimensions
Bibliography

This European Standard applies to cold rolled uncoated and electrolytically zinc or zinc-nickel coated low carbon and high yield strength steel flat products for cold forming with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of ordering, less than or equal to 3 mm thick, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet. The concerned standards are EN 10130, EN 10152, EN 10271, EN 10209, EN 10268 and prEN 10338.

It does not apply to cold rolled strip (rolled width < 600 mm) or to flat cold rolled products for which there is a specific standard, in particular the following:

cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106);

semi-processed steel strip for the construction of magnetic circuits (EN 10126 and 10165);

tinplate and ECCS (EN 10202);

blackplate in coils (EN 10205);

cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139).

Committee
CEN/TC 459/SC 9
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
NBN EN 10131 : 2007 Identical
UNE-EN 10131:2007 Identical
NEN EN 10131 : 2006 Identical
BS EN 10131:2006 Identical
I.S. EN 10131:2006 Identical
PN EN 10131 : 2008 Identical
NF EN 10131 : 2006 Identical
DIN EN 10131:2006-09 Identical
NS EN 10131 : 2ED 2006 Identical
SN EN 10131 : 2006 Identical
UNI EN 10131 : 2006 Identical
UNE 36563:1992 Identical

DIN EN 10152:2009-07 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10338:2015-10 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
I.S. EN 13025-3:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 3: REMOVABLE HEAD (OPEN HEAD) ROUND STEEL AND TINPLATE CONTAINERS WITH A NOMINAL CAPACITY OF 20 000 ML, 25 000 ML AND 30 000 ML
PREN 14353 : DRAFT 2016 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
13/30280398 DC : 0 BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 14353 E : 2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 10169:2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
PREN 10120 : DRAFT 2014 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
BS EN 14353 : 2007 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 10359:2016 Laser welded tailored blanks - Technical delivery conditions
UNI EN 912 : 2011 TIMBER FASTENERS - SPECIFICATIONS FOR CONNECTORS FOR TIMBER
DIN EN 13025-3:2006-01 Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 10304:2001 Magnetic materials (iron and steel) for use in relays
BS EN 912:2011 Timber fasteners. Specifications for connectors for timbers
BS EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods)
BS EN 13025-1:2005 Packaging. Light gauge metal containers Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
I.S. EN 912:2011 TIMBER FASTENERS - SPECIFICATIONS FOR CONNECTORS FOR TIMBERS
I.S. EN 10120:2017 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
EN 10143:2006 (edition 2) Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 10120:2017 Steel sheet and strip for welded gas cylinders
EN 10079:2007 Definition of steel products
EN 12711 : 2000 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 230 L
EN 13008:1999 Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l
EN 10304:2001 Magnetic materials (iron and steel) for use in relays
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10130:2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10140:2006 Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 13025-3:2005 (edition 2) Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
10/30236539 DC : 0 BS EN 442-1 - RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
02/713774 DC : DRAFT DEC 2002 EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 13025-1:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 1: NOMINAL FILLING VOLUMES FOR ROUND, CYLINDRICAL AND TAPERED GENERAL USE METAL CONTAINERS UP TO 40 000 ML
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 10359 E : 2015 LASER WELDED TAILORED BLANKS - TECHNICAL DELIVERY CONDITIONS
08/30161340 DC : DRAFT FEB 2008 BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS
16/30332891 DC : DRAFT JAN 2016 BS EN 16475-6 - CHIMNEYS - ACCESSORIES - PART 6: ACCESS COMPONENTS - REQUIREMENTS AND TEST METHODS
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
I.S. EN 10359:2015 LASER WELDED TAILORED BLANKS - TECHNICAL DELIVERY CONDITIONS
BS EN 10169 : 2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 14353:2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 10120:2018 Steel sheet and strip for welded gas cylinders
DIN EN 10140:2006-09 Cold rolled narrow steel strip - Tolerances on dimensions and shape
DIN EN 10130 : 2007-04 COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 442-1:2015 Radiators and convectors - Part 1: Technical specifications and requirements
BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
I.S. EN 10143:2006 CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 209:2000 STEEL DRUMS - REMOVABLE HEAD (OPEN HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 210 L
I.S. EN 10130:2006 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10152:2017 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10209:2013 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10169-1:2004-04 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 442-1:2014 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
I.S. EN 12711:2000 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 230 L
I.S. EN 10140:2006 COLD ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 10268:2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 210:2000 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 216.5 L
I.S. EN 10079:2007 DEFINITION OF STEEL PRODUCTS
DIN EN 10169:2012-06 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012)
I.S. EN 10169-1:2004 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
UNE-EN 10338:2016 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
DIN EN 10359:2015-10 Laser welded tailored blanks - Technical delivery conditions
BS EN 10359:2015 Laser welded tailored blanks. Technical delivery conditions
16/30332914 DC : 0 BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 10209 : DRAFT 2010 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
14/30312176 DC : 0 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
05/30132920 DC : DRAFT APR 2005 EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
13/30278682 DC : 0 BS EN 442-1 - RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
04/30117571 DC : DRAFT AUG 2004 EN 10143 - CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
PREN 442-1 : DRAFT 2013 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
UNE-EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
IEC 60404-8-10:2009 Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 10120:2017 Steel sheet and strip for welded gas cylinders
BS EN 10140:2006 Cold rolled narrow steel strip. Tolerances on dimensions and shape
BS EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products Products for building interior applications
UNI EN 10079 : 2007 DEFINITION OF STEEL PRODUCTS
UNI EN 10268 : 2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 10209 : 2013 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10143:2006-09 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
DIN EN 14353:2016-02 (Draft) METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 10336:2007 CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10152:2015-10 (Draft) ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
NF ENV 1090-1 : 96 FD EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
02/713544 DC : DRAFT NOV 2002 EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification
I.S. EN 10338:2015 HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
PREN 10268 : DRAFT 2002 COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
DIN EN 10268:2013-12 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 442-1:2015-03 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
DIN EN 912:2011-09 Timber fasteners - Specifications for connectors for timbers
BS EN 12711:2000 Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l
BS EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions
BS EN 442-1:2014 Radiators and convectors Technical specifications and requirements
BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 13025-2:2005 Packaging. Light gauge metal containers Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 10336:2007 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions
BS EN 13008:2000 Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 l
BS EN 10143:2006 Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape
BS EN 10079:2007 Definition of steel products
UNE-EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
BS EN 13025-3:2005 Packaging. Light gauge metal containers Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 210:2000 Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l
UNE-EN 10268:2007 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
UNE-EN 10169:2011 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 210 : 1999 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 216,5 L
EN 209 : 1999 STEEL DRUMS - REMOVABLE HEAD (OPEN HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 210 L
EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
EN 912:2011 Timber fasteners - Specifications for connectors for timbers
EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements
13/30281978 DC : 0 BS EN 10359 - LASER WELDED TAILORED BLANKS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 13025-2:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 2: NON-REMOVABLE HEAD (TIGHT HEAD) ROUND STEEL AND TINPLATE CONTAINERS WITH A NOMINAL CAPACITY OF 20 000 ML, 25 000 ML AND 30 000 ML
07/30117697 DC : 0 BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10169-3:2003 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
08/30188146 DC : 0 BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
10/30227692 DC : 0 BS EN 10209 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
04/30117694 DC : DRAFT AUG 2004 EN 10130 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10209:2013-09 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
07/30164617 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
15/30327671 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS 1449-1.7(1991) : 1991 STEEL PLATE, SHEET AND STRIP - CARBON AND CARBON MANGANESE PLATE, SHEET AND STRIP - SPECIFICATION FOR TOLERANCES ON DIMENSIONS AND SHAPE FOR COLD ROLLED WIDE MATERIAL
02/713103 DC : DRAFT NOV 2002 PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 10169 : 2012 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
PREN 10338 : DRAFT 2013 HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 13025-1:2006-01 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
DIN EN 13025-2:2006-01 Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
UNE-EN 912:2011 Timber fasteners - Specifications for connectors for timbers
BS EN 209:2000 Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l
BS EN 10268 : 2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10130:2006 Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions
BS EN 13007:2000 Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
BS EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
EN 10359:2015 Laser welded tailored blanks - Technical delivery conditions
DIN EN 10336:2007-07 CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 13025-2:2005 (edition 2) Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
EN 13007:1999 Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
EN 10336:2007 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions
DIN EN 10079:2007-06 Definition of steel products
EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
EN 13025-1:2005 (edition 2) Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
DIN EN 14353:2017-09 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 10162:2003-12 Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003

EN 10079:2007 Definition of steel products
EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
EN 10202:2001/AC:2003 COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL
EN 10205:2016 Cold reduced tinmill products - Blackplate
PREN 10338 : DRAFT 2013 HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10130:2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
EN 10341:2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more