EN 10169:2010+A1:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
Superseded date
31-03-2022
Published date
28-03-2012
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Information to be supplied by the purchaser
6 Requirements
7 Inspection
8 Marking
9 Packing and dispatch
10 Storage
Annex A (informative) - Types of ambience
Annex B (informative) - Coating materials
Annex C (informative) - Types of atmosphere
Annex D (informative) - Outdoor exposure sites
Annex E (informative) - Storage
Bibliography
This European Standard specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements. The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).NOTEThis document is not applicable to continuously organic coated flat products made of:-tinmill products,-electrical steels.
| Committee |
CEN/TC 459/SC 9
|
| DevelopmentNote |
Supersedes EN 10169-1, EN 10169-2 and EN 10169-3. (11/2010) Supersedes PREN 10169. (04/2011) 2010 Edition Re-Issued in March 2012 & incorporates AMD 1 2012. (04/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 10169 : 2010 + A1 2013 | Identical |
| NBN EN 10169 : 2010 + A1 2012 | Identical |
| NEN EN 10169 : 2010 + A1 2012 | Identical |
| NS EN 10169 : 2010 + A1 2012 | Identical |
| I.S. EN 10169:2010 | Identical |
| PN EN 10169 : 2011 + A1 2012 | Identical |
| SN EN 10169 : 2011 + A1 2012 | Identical |
| UNI EN 10169 : 2012 | Identical |
| BS EN 10169 : 2010 | Identical |
| DIN EN 10169:2012-06 | Identical |
| UNE-EN 10169:2011 | Identical |
| UNE-EN 10169:2011+A1:2012 | Identical |
| BS EN 10169:2010+A1:2012 | Identical |
| PREN 13523-21 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| UNI EN 13523-19 : 2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| 15/30329701 DC : 0 | BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| 15/30329698 DC : 0 | BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| 12/30268955 DC : 0 | BS EN 13523-3 - COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| BS EN 13523-4:2014 | Coil coated metals. Test methods Pencil hardness |
| FD CEN/TR 16239 : 2011 FD | INSTALLATION RULES OF FIBROUS (GYPSUM) PLASTER WORKS |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| UNI EN 13523-17 : 2012 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
| PREN 13523-13 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| 12/30268970 DC : 0 | BS EN 13523-25 - COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY |
| 15/30329707 DC : 0 | BS EN 13523-22 - COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| PREN 13523-10 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| BS EN 16074:2011 | Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials |
| DIN EN 13523-29:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| I.S. EN 13523-27:2017 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 14/30297831 DC : 0 | BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNE-EN 13523-29:2017 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| DIN EN 13523-15:2015-09 | Coil coated metals - Test methods - Part 15: Metamerism |
| BS EN 13523-13:2014 | Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat |
| BS EN 13523-20:2011 | Coil coated metals. Test methods Foam adhesion |
| BS EN 13523-2:2014 | Coil coated metals. Test methods Gloss |
| BS EN 13523-8:2017 | Coil coated metals. Test methods Resistance to salt spray (fog) |
| UNE-EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| UNE-EN 13523-25:2014 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
| BS EN 13523-24:2017 | Coil coated metals. Test methods Resistance to blocking and pressure marking |
| BS EN 13523-11:2011 | Coil coated metals. Test methods Resistance to solvents (rubbing test) |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| UNI EN 13523-3 : 2014 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
| EN 13523-17:2011 | Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
| EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
| EN 13523-26:2014 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
| DIN EN 508-1:2000-12 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| EN 13523-5:2014 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| DIN EN 13523-22:2017-05 | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| DIN EN 13523-1:2017-05 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 508-1 : 2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| EN 13523-13:2014 | Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
| EN 13523-11:2011 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
| EN 13523-14:2014 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
| EN 13523-29:2017 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| 12/30268952 DC : 0 | BS EN 13523-0 - COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| 13/30280395 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| 12/30268976 DC : 0 | BS EN 13523-4 - COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| 12/30268967 DC : 0 | BS EN 13523-14 - COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| I.S. EN 13523-29:2017 | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| DIN EN 13523-4:2014-10 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| UNE-EN 13523-27:2017 | Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
| PREN 13523-8 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| BS EN 13523-29:2017 | Coil coated metals. Test methods Resistance to environmental soiling (Dirt pick-up and striping) |
| 12/30268958 DC : 0 | BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 14/30291744 DC : 0 | BS EN 13523-23 - COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| PREN 13523-3 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| PREN 13523-4 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| I.S. EN 16074:2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| PREN 13523-0 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS |
| PREN 13523-7 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 13523-22:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| DIN EN 13523-26:2014-08 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
| DIN EN 13523-10:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| DIN EN 13523-17:2012-02 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
| DIN EN 505:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| UNE-EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| BS EN 13523-1:2017 | Coil coated metals. Test methods Film thickness |
| EN 13523-20:2011 | Coil coated metals - Test methods - Part 20: Foam adhesion |
| UNE-EN 13523-11:2012 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
| I.S. EN 13523-7:2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 13523-5:2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| I.S. EN 13523-23:2015 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| I.S. EN 13523-25:2014 | COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY |
| I.S. EN 13523-21:2017 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| I.S. EN 13523-8:2017 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| I.S. EN 505:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| I.S. EN 13523-13:2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| I.S. EN 13523-12:2017 | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| I.S. EN 13523-1:2017 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| DIN EN 13523-11:2011-09 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
| I.S. EN 13523-2:2014 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| I.S. EN 508-1:2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| I.S. EN 13523-3:2014 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| I.S. EN 13523-15:2015 | COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
| I.S. EN 13523-10:2017 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| I.S. EN 502:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13523-26:2014 | COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| I.S. EN 13523-22:2017 | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| I.S. EN 13523-14:2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| I.S. EN 13523-24:2017 | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| I.S. EN 13523-9:2014 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| I.S. EN 13523-0:2014 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| UNI EN 502 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| 16/30340560 DC : 0 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 12/30264367 DC : 0 | BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| DIN EN 10346:2015-10 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| 12/30264373 DC : 0 | BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| 12/30268964 DC : 0 | BS EN 13523-9 - COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| 15/30329704 DC : 0 | BS EN 13523-10 - COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| DIN EN 13523-21:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| UNE-EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| DIN EN 13523-27:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| DIN EN 13523-24:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| PREN 13523-24 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| CEN/TR 16239:2011 | Installation rules of fibrous (gypsum) plaster works |
| UNI EN 16074 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| PREN 13523-23 : DRAFT 2014 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| I.S. EN 13523-11:2011 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
| PREN 13523-1 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| PREN 505 : DRAFT 2012 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| PREN 13523-5 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN EN 13523-12:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| DIN EN 13523-19:2011-09 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| DIN EN 13523-14:2014-08 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| DIN EN 13523-0:2014-08 | Coil coated metals - Test methods - Part 0: General introduction |
| DIN EN 508-1:2014-08 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| DIN EN 13523-2:2014-08 | Coil coated metals - Test methods - Part 2: Gloss |
| DIN EN 13523-3:2014-08 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| BS EN 13523-15:2015 | Coil coated metals. Test methods Metamerism |
| UNE-EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| UNE-EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
| UNE-EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| UNE-EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| UNE-EN 13523-17:2012 | Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
| UNI EN 13523-20 : 2012 | COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| I.S. EN 13523-20:2011 | COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 505 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| UNI EN 13523-4 : 2014 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| UNI EN 13523-14 : 2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| UNI EN 13523-13 : 2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 13523-5 : 2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| 02/102266 DC : DRAFT MAR 2002 | PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| 15/30329710 DC : 0 | BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| DIN EN 14509 E : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| 14/30291747 DC : 0 | BS EN 13523-15 - COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
| PREN 13523-12 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| I.S. EN 10346:2015 | CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 13523-9 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 502 : DRAFT 2012 | ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| I.S. EN 13523-19:2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| UNI EN 13523-11 : 2011 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
| DIN EN 13523-13:2014-08 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| DIN EN 13523-23:2015-09 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| DIN EN 13523-25:2014-08 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
| DIN EN 13523-7:2014-08 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| DIN EN 13523-5:2014-08 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| DIN EN 13523-1:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| DIN EN 13523-9:2014-08 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| DIN EN 502:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| BS EN 13523-5:2014 | Coil coated metals. Test methods Resistance to rapid deformation (impact test) |
| BS EN 13523-12:2017 | Coil coated metals. Test methods Resistance to scratching |
| BS EN 508-1:2014 | Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet Steel |
| BS EN 502:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet |
| BS EN 13523-22:2017 | Coil coated metals. Test methods Colour difference. Visual comparison |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| BS EN 13523-25:2014 | Coil coated metals. Test methods Resistance to humidity |
| UNE-EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| UNE-EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| BS EN 13523-21:2017 | Coil coated metals. Test methods Evaluation of outdoor exposed panels |
| UNE-EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| BS EN 13523-3:2014 | Coil coated metals. Test methods Colour difference. Instrumental comparison |
| UNE-EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
| BS EN 13523-17:2011 | Coil coated metals. Test methods Adhesion of strippable films |
| BS EN 13523-26:2014 | Coil coated metals. Test methods Resistance to condensation of water |
| UNE-EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| UNE-EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
| UNE-EN 13523-20:2012 | Coil coated metals - Test methods - Part 20: Foam adhesion |
| UNE-EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| UNE-EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| UNE-EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| DIN EN 13523-27:2009-10 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| UNI EN 13523-26 : 2014 | COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| UNI EN 13523-9 : 2014 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| UNI EN 13523-25 : 2014 | COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY |
| EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| PD CEN/TR 16239:2011 | Installation rules of fibrous (gypsum) plaster works |
| PREN 13523-2 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| 16/30340563 DC : 0 | BS EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| 12/30268973 DC : 0 | BS EN 13523-2 - COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| 12/30268961 DC : 0 | BS EN 13523-7 - COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| DIN EN 13523-8:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 15/30329713 DC : 0 | BS EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| 12/30268979 DC : 0 | BS EN 13523-26 - COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| 12/30268982 DC : 0 | BS EN 13523-13 - COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| 16/30340557 DC : 0 | BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| I.S. EN 13523-4:2014 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| DIN EN 16074:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 13523-29 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 13523-17:2011 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
| 15/30326160 DC : 0 | BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS |
| BS EN 13523-19:2011 | Coil coated metals. Test methods Panel design and method of atmospheric exposure testing |
| PREN 13523-27 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| DIN EN 13523-20:2012-02 | COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| UNE-EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| UNE-EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| BS EN 13523-9:2014 | Coil coated metals. Test methods Resistance to water immersion |
| BS EN 13523-14:2014 | Coil coated metals. Test methods Chalking (Helmen method) |
| BS EN 505:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet |
| BS EN 13523-7:2014 | Coil coated metals. Test methods Resistance to cracking on bending (T-bend test) |
| UNE-EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| BS EN 13523-0:2014 | Coil coated metals. Test methods General introduction |
| BS EN 13523-10:2017 | Coil coated metals. Test methods Resistance to fluorescent UV radiation and water condensation |
| BS EN 13523-23:2015 | Coil coated metals. Test methods Resistance to humid atmospheres containing sulfur dioxide |
| EN 13523-27:2017 | Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| UNI EN 13523-2 : 2014 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| UNI EN 13523-7 : 2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| EN 13523-25:2014 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
| DIN EN 13523-29:2017-05 | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| UNI EN 13523-0 : 2014 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION |
| DIN EN 13523-10:2017-05 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| EN 13523-11:2011 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| EN 13523-14:2014 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| EN 13523-26:2014 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
| EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
| EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
| EN 10268:2006+A1:2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 11997-1:2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
| EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| PREN 10338 : DRAFT 2013 | HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 10131:2006 (edition 2) | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| EN 10143:2006 (edition 2) | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| EN 13523-18:2002 | Coil coated metals - Test methods - Part 18: Resistance to staining |
| EN 13523-27:2017 | Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
| EN 13523-5:2014 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN 13523-25:2014 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
| EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 606:2004 | BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| EN ISO 4618:2014 | Paints and varnishes - Terms and definitions (ISO 4618:2014) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.