Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 10202:2001/AC:2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL
Amendment of

EN 10202:2001

Superseded date

09-03-2022

Published date

15-10-2003

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designation
6 Manufacturing features
7 Coatings
8 Mechanical properties
9 Tolerances on dimensions and shape
10 Welds within a coil
11 Marking of differentially coated cold reduced
   tinplate
12 Sampling
13 Retests
14 Dispatch and packaging
Annex A (informative) Examples of steel types and
        chemical composition
Annex B (normative) De-tinning
Annex C (normative) Determination of chromium using
        the diphenylcarbazide method
Annex D (normative) Electromechanical method for
        determining tin coating mass
Annex E (normative) Methods for determination of
        metallic chromium and chromium in the oxide
        on the surface of electrolytic chromium and
        chromium oxide coated steel
Annex F (informative) The Rockwell Hardness test for
        routine determination of proof strength for
        double reduced materials
Annex G (informative) The springback test for routine
        determination of proof strength for double
        reduced material
Annex H (informative) Alternative marking system for
        differentially coated tinplate
Annex I (informative) List of corresponding former
        designations
Bibliography

Gives requirements for single and double cold reduced electrolytic chromium and chromium oxide coated steel in the form of sheets of coils for subsequent cutting into sheets. Covers references, definitions, designation, manufacturing features, specific requirements, chromium and chromium in oxide coating mass, mechanical properties, tolerances on dimensions and shape, joints within a coil, sampling, test methods, retests and dispatch and packaging.

Committee
SC 9
DevelopmentNote
Supersedes EN 10203 (12/2003)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

DIN EN 13025-3:2006-01 Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 13025-1:2005 Packaging. Light gauge metal containers Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
UNI EN 508-3 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
EN 10131:2006 (edition 2) Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10335:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
EN 10079:2007 Definition of steel products
EN 10333:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate)
EN 508-3:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
EN 13025-3:2005 (edition 2) Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
I.S. EN 13025-1:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 1: NOMINAL FILLING VOLUMES FOR ROUND, CYLINDRICAL AND TAPERED GENERAL USE METAL CONTAINERS UP TO 40 000 ML
I.S. EN 13025-3:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 3: REMOVABLE HEAD (OPEN HEAD) ROUND STEEL AND TINPLATE CONTAINERS WITH A NOMINAL CAPACITY OF 20 000 ML, 25 000 ML AND 30 000 ML
07/30168410 DC : DRAFT DEC 2007 BS EN 508-3 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
17/30363987 DC : 0 BS EN 17177 - GLASS PACKAGING - CROWN CAP - 26 MM INTERMEDIATE DEPTH CROWN CAP
DIN EN 13029:2010-04 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
DIN EN 508-3:2009-07 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
BS EN 10335:2005 Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Non alloyed electrolytic chromium/chromium oxide coated steel
I.S. EN 13029:2009 PACKAGING - LIGHT-GAUGE METAL PACKAGING - APERTURES FOR PLUG-IN PLASTIC CLOSURES
I.S. EN 10131:2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICKEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 508-3:2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
I.S. EN 502:2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
I.S. EN 10079:2007 DEFINITION OF STEEL PRODUCTS
UNI EN 502 : 2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
12/30264373 DC : 0 BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
UNE-EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017)
BS EN 10333:2005 Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinplate)
UNE-EN 13029:2010 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
UNE-EN 508-3:2010 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 502:2013 Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
UNI EN 10079 : 2007 DEFINITION OF STEEL PRODUCTS
UNI EN 10131 : 2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICHEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
UNI EN 13029 : 2010 PACKAGING - LIGHT-GAUGE METAL PACKAGING - APERTURES FOR PLUG-IN PLASTIC CLOSURES
DIN EN 10131:2006-09 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
I.S. EN ISO 16773-4:2017 ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED AND UNCOATED SPECIMENS (ISO 16773-4:2017)
PREN 502 : DRAFT 2012 ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
PREN 17177 : DRAFT 2017 GLASS PACKAGING - CROWN CAP - 26 MM INTERMEDIATE DEPTH CROWN CAP
DIN EN 502:2013-06 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
BS EN 13026:2001 Packaging. Light-gauge metal packaging. Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml
BS EN 502:2013 Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet
BS EN 13025-2:2005 Packaging. Light gauge metal containers Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape
BS EN 508-3:2008 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet Stainless steel
BS EN 10079:2007 Definition of steel products
BS EN 13025-3:2005 Packaging. Light gauge metal containers Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 13025:2000 Packaging. Light gauge metal packaging. Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml
ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens
UNE-EN 502:2013 Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017)
I.S. EN 13025-2:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 2: NON-REMOVABLE HEAD (TIGHT HEAD) ROUND STEEL AND TINPLATE CONTAINERS WITH A NOMINAL CAPACITY OF 20 000 ML, 25 000 ML AND 30 000 ML
BS EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Examples of spectra of polymer-coated and uncoated specimens
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
DIN EN ISO 16773-4:2016-02 (Draft) ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED AND UNCOATED SPECIMENS (ISO 16773-4:2017)
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 13025-1:2006-01 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
DIN EN 13025-2:2006-01 Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 13029:2001 Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures
EN 13029:2009 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
DIN EN 10333:2005-07 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate); German version EN 10333:2005
EN 13025-2:2005 (edition 2) Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
DIN EN 10079:2007-06 Definition of steel products
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
EN 13025-1:2005 (edition 2) Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
DIN EN 10335:2005-07 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel; German version EN 10335:2005

EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
EN 610:1995 Tin and tin alloys - Ingot tin
ISO 11949:2016 Cold-reduced tinmill products Electrolytic tinplate
EN 10109-1 : 1994 METALLIC MATERIALS - HARDNESS TEST - PART 1: ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more