EN 10205:2016
Current
The latest, up-to-date edition.
30-11-2016
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Steelmaking process
7 Mechanical properties
8 Tolerances on dimensions and shape
9 Welds within a coil
10 Inspection and Sampling
11 Test methods
12 Retests
13 Marking
14 Dispatch and packaging
Annex A (informative) - Examples of steel types
and chemical composition
Annex B (informative) - The Rockwell Hardness
test for routine determination
Annex C (informative) - List of corresponding
former designations
Bibliography
This European Standard specifies requirements for blackplate product in the form of coils intended for direct use and mostly for the production of tinplate, electrolytically chromium / chromium oxide plate (ECCS) and electrolytically zinc coated plate.Blackplate is specified in nominal thicknesses that are multiples of 0,005 mm from typical 0,10 mm up to 0,60mm.This European Standard applies to coils in nominal minimum widths of 600 mm.In addition to this standard the general technical delivery conditions of EN 10021 apply.NOTEStandard width coils for specific uses, e.g. tab stock, can be slit into narrow strip for supply in coil form.
| DevelopmentNote |
Supersedes PREN 10205. (12/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 10205:2016 | Identical |
| UNE-EN 10205:2017 | Identical |
| PN EN 10205 : 2017 | Identical |
| UNE 36139-1:1992 | Identical |
| SS-EN 10205:2016 | Identical |
| NBN EN 10205 : 1992 | Identical |
| UNI EN 10205 : 1993 | Identical |
| NF EN 10205 : 2017 | Identical |
| BS EN 10205:2016 | Identical |
| NEN EN 10205 : 2017 | Identical |
| NS EN 10205 : 1991 | Identical |
| DIN EN 10205:1992-01 | Identical |
| SN EN 10205 : 2017 | Identical |
| DIN EN 10205:2017-03 | Identical |
| 14/30266796 DC : 0 | BS EN ISO 1514 - PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| EN 10131:2006 (edition 2) | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| DIN EN 10140:2006-09 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
| I.S. EN 10131:2006 | COLD ROLLED UNCOATED AND ZINC OR ZINC-NICKEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE |
| I.S. EN 10140:2006 | COLD ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| I.S. EN ISO 1514:2016 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016) |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| BS EN 10140:2006 | Cold rolled narrow steel strip. Tolerances on dimensions and shape |
| EN 10334:2005 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate) |
| UNI EN 10079 : 2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 10131 : 2006 | COLD ROLLED UNCOATED AND ZINC OR ZINC-NICHEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE |
| DIN EN 10131:2006-09 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| BS EN 10334:2005 | Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption. Non-coated steel (blackplate) |
| BS EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape |
| UNE-EN ISO 1514:2017 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| BS EN 10079:2007 | Definition of steel products |
| EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| PD CR 10313:2000 | Classification of grades of steel. Examples of classification related to European standards |
| 04/30117694 DC : DRAFT AUG 2004 | EN 10130 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| S.R. CR 10313:2000 | CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| DIN EN 10079:2007-06 | Definition of steel products |
| DIN EN 10334:2005-07 | STEEL FOR PACKAGING - FLAT STEEL PRODUCTS INTENDED FOR USE IN CONTACT WITH FOODSTUFFS, PRODUCTS AND BEVERAGES FOR HUMAN AND ANIMAL CONSUMPTION - NON-COATED STEEL (BLACKPLATE) |
| CR 10313:2000 | Classification of grades of steel - Examples of classification related to European Standards |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 4288 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 11951:2016 | Cold-reduced tinmill products Blackplate |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.