EN 10244-2:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
Withdrawn date
31-10-2009
Published date
15-04-2009
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Coating requirements
4.1 Requirements for the coatings material
4.2 Requirements relating to coating on the wire
4.2.1 Coating mass
4.2.2 Appearance of coating
4.2.3 Dipping test
4.2.4 Special finishes
4.2.5 Adherence of coating
5 Test conditions
5.1 Selection of samples
5.2 Determination of mass of coating
5.2.1 General
5.2.2 Gravimetric method
5.2.3 Gaseous volumetric method
5.3 Dipping test
5.3.1 Principle
5.3.2 Reagents
5.3.3 Preparation of test piece
5.3.4 Performing of the test
5.3.5 Interpretation of results
Bibliography
This part of this European Standard specifies the requirement for coating mass, other properties and testing of zinc and zinc alloy coatings on steel wire and steel wire products of circular or other section.
| Committee |
CEN/TC 459/SC 6
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NEN EN 10244-2 : 2009 | Identical |
| SN EN 10244-2 : 2009 | Identical |
| DIN EN 10244-2:2009-08 | Identical |
| SANS 10244-2 : 2ED 2011 | Identical |
| UNI EN 10244-2 : 2009 | Identical |
| PN EN 10244-2 : 2010 | Identical |
| NBN EN 10244-2 : 2009 | Identical |
| I.S. EN 10244-2:2009 | Identical |
| SS-EN 10244-2:2009 | Identical |
| UNE-EN 10244-2:2010 | Identical |
| BS EN 10244-2:2009 | Identical |
| NF EN 10244-2 : 2009 | Identical |
| NS EN 10244-2 : 2009 | Identical |
| ONORM EN 10244-2 : 2009 | Identical |
| DS EN 10244-2 : 2009 | Identical |
| PREN 13658-2 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING |
| 08/30189622 DC : 0 | BS EN 10223-8 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 8: WELDED MESH GABION PRODUCTS |
| BS EN 50288-7:2005 | Multi-element metallic cables used in analogue and digital communication and control Sectional specification for instrumentation and control cables |
| FD CEN/TR 16239 : 2011 FD | INSTALLATION RULES OF FIBROUS (GYPSUM) PLASTER WORKS |
| 17/30357430 DC | BS EN 13658-2. Metal lath and beads. Definitions, requirements and test methods. Part 2. External rendering |
| CEI EN 50189 : 2000 | CONDUCTORS FOR OVERHEAD LINES - ZINC COATED STEEL WIRES |
| 08/30189619 DC : 0 | BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| 06/30146125 DC : 0 | EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN 15381:2008-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 08/30189604 DC : 0 | BS EN 10223-2 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION, AND FENCING PURPOSES |
| PREN 10264-2 : DRAFT 2017 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 2: COLD DRAWN NON ALLOY STEEL WIRE FOR ROPES FOR GENERAL APPLICATIONS |
| DIN EN 16820 E : 2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| 98/105109 DC : DRAFT JUNE 1998 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
| 08/30189625 DC : 0 | BS EN 10257-1 - ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| CEI EN 50540 : 2010 | CONDUCTORS FOR OVERHEAD LINES - ALUMINIUM CONDUCTORS STEEL SUPPORTED (ACSS) |
| PREN 50540 : DRAFT 2009 | ALUMINIUM CONDUCTORS STEEL SUPPORTED (ACSS) FOR OVERHEAD LINES |
| I.S. CEN/TR 15125:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL CEMENT AND/OR LIME PLASTERING SYSTEMS |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| PREN 10223-5 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 15381:2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| I.S. HD 605:2008 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
| EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| DIN EN 12385-1:2009-01 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 10264-2:2012 | Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
| BS EN 10223-2:2012 | Steel wire and wire products for fencing and netting Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| UNE-EN 10223-1:2013 | Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire |
| UNE-EN 10257-2:2012 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| I.S. EN 10223-5:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| I.S. EN 10223-6:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING |
| I.S. EN 10223-7:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| DIN EN 14195:2015-03 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13815:2006-12 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 10223-7:2012 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN 10270-1:2011+A1:2017 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| EN 10223-2:2012 | Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| EN 10257-2:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| EN 50540:2010 | Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS) |
| EN 10223-5:2012 | Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
| EN 10264-2:2012 | Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
| EN 10257-1:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 10264-2 : 2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 2: COLD DRAWN NON ALLOY STEEL WIRE FOR ROPES FOR GENERAL APPLICATIONS |
| EN 50189:2000 | Conductors for overhead lines - Zinc coated steel wires |
| EN 10223-4:2012 | Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| 08/30189610 DC : 0 | BS EN 10223-4 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 4: STEEL WIRE WELDED MESH FENCING |
| 13/30265753 DC : 0 | BS EN 13914-2 - DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: DESIGN CONSIDERATIONS AND ESSENTIAL PRINCIPLES FOR INTERNAL PLASTERING |
| 08/30189607 DC : 0 | BS EN 10223-3 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE NETTING FOR ENGINEERING PURPOSES |
| 08/30189613 DC : 0 | BS EN 10223-5 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| PD CEN/TR 15123:2005 | Design, preparation and application of internal polymer plastering systems |
| HD 605 S2:2008/corrigendum:2010 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 13658-1 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
| PREN 10223-6 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 6: STEEL WIRE CHAIN LINK FENCING |
| PREN 10257-1 : DRAFT 2008 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| I.S. EN 16820:2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| PREN 10257-2 : DRAFT 2008 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| NF EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| I.S. EN 10270-1:2011+A1:2017 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| DIN EN 13206:2015-09 (Draft) | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 14475:2006-04 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| BS EN 14195:2014 | Metal framing components for gypsum board systems. Definitions, requirements and test methods |
| BS EN 13914-2:2016 | Design, preparation and application of external rendering and internal plastering Internal plastering |
| BS EN 10270-1 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| BS EN 10264-2:2012 | Steel wire and wire products. Steel wire for ropes Cold drawn non alloy steel wire for ropes for general applications |
| I.S. EN 12385-1:2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| I.S. EN 10257-1:2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| I.S. EN 10223-2:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES |
| I.S. EN 10270-1:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| I.S. EN 10223-1:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| I.S. EN 10264-3:2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 3: ROUND AND SHAPED NON ALLOYED STEEL WIRE FOR HIGH DUTY APPLICATIONS |
| I.S. EN 10264-1:2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN 1993-1-11:2010-12 | Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components (includes Corrigendum AC:2009) |
| I.S. EN 10223-4:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING |
| I.S. EN 14195:2014 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 10257-2:2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| I.S. EN 13914-2:2016 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: INTERNAL PLASTERING |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 10264-2:2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 2: COLD DRAWN NON ALLOY STEEL WIRE FOR ROPES FOR GENERAL APPLICATIONS |
| NF EN 10264-2 : 2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 2: COLD DRAWN NON-ALLOY STEEL WIRE FOR ROPES FOR GENERAL APPLICATIONS |
| VDI 2579:2008-05 | Emission control - Hot-dip zinc galvanizing plants |
| 08/30189601 DC : 0 | BS EN 10223-1 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| BS EN 50540:2010 | Conductors for overhead lines. Aluminium conductors steel supported (ACSS) |
| DIN EN 16820:2015-03 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| 08/30180150 DC : DRAFT JUNE 2008 | BS EN 10264-2 - STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 2: COLD DRAWN NON-ALLOY STEEL WIRE FOR ROPES FOR GENERAL APPLICATIONS |
| UNE-EN 50540:2010 | Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS) |
| 07/30172380 DC : 0 | BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| UNE-EN 1993-1-11:2015 | Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components |
| I.S. CEN/TR 15123:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL POLYMER PLASTERING SYSTEMS |
| CEN/TR 16239:2011 | Installation rules of fibrous (gypsum) plaster works |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| UNE-EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 13206:2017 | Plastics. Thermoplastic covering films for use in agriculture and horticulture |
| DIN EN 10223-4:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING |
| DIN EN 10223-2:2013-02 | Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| DIN EN 13914-2:2016-09 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: INTERNAL PLASTERING |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| BS EN 14475:2006 | Execution of special geotechnical works. Reinforced fill |
| DIN EN 13206:2017-05 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| BS EN 10264-1:2012 | Steel wire and wire products. Steel wire for ropes General requirements |
| BS EN 10264-3:2012 | Steel wire and wire products. Steel wire for ropes Round and shaped non alloyed steel wire for high duty applications |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| UNI EN 10257-2 : 2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| UNI EN 10223-6 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 10257-1 : 2011 | ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES |
| UNI EN 10264-3 : 2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 3: ROUND AND SHAPED NON ALLOYED STEEL WIRE FOR HIGH DUTY APPLICATIONS |
| UNI EN 10223-7 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN 10223-5 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| UNI EN 10264-1 : 2012 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 10223-1 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| EN 10264-1:2012 | Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
| UNI EN 1993-1-11 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 10223-4 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING |
| UNI EN 12385-1 : 2009 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN 14475 : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| UNI EN 10223-2 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES |
| PREN 13914-2 : DRAFT 2013 | DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 2: DESIGN CONSIDERATIONS AND ESSENTIAL PRINCIPLES FOR INTERNAL PLASTERING |
| BS EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining |
| 08/30180147 DC : DRAFT JUNE 2008 | BS EN 10264-1 - STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| UNI EN 15381 : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 08/30180153 DC : DRAFT JUNE 2008 | BS EN 10264-3 - STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 3: ROUND AND SHAPED NON ALLOYED STEEL WIRE FOR HIGH DUTY APPLICATIONS |
| 10/30212123 DC : 0 | BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| PREN 10223-3 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR ENGINEERING PURPOSES |
| PREN 10223-4 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 4: STEEL WIRE WELDED MESH FENCING |
| UNE-EN 50288-7:2011 | Multi-element metallic cables used in analogue and digital communication and control -- Part 7: Sectional specification for instrumentation and control cables |
| 08/30189616 DC : 0 | BS EN 10223-6 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 6: STEEL WIRE CHAIN LINK FENCING |
| PREN 10223-1 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| 08/30180850 DC : DRAFT JUNE 2008 | BS EN 10270-1 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| 09/30208778 DC : 0 | BS EN 50540 - ALUMINIUM CONDUCTORS STEEL SUPPORTED (ACSS) FOR OVERHEAD LINES |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| 17/30357427 DC | BS EN 13658-1. Metal lath and beads. Definitions, requirements and test methods. Part 1. Internal plastering |
| S.R. CWA 16221:2010 | VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| IWA 14-2:2013 | Vehicle security barriers — Part 2: Application |
| DIN EN 10257-2:2012-02 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| I.S. EN 50288-7:0 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 7: SECTIONAL SPECIFICATION FOR INSTRUMENTATION AND CONTROL CABLES |
| DIN EN 10264-2:2012-03 | Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
| I.S. EN 13206:2017 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 10223-6:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING |
| DIN EN 14475 E : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN 10223-7:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| DIN EN 10223-5:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING |
| DIN EN 10223-1:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| BS EN 12385-1 : 2002 | STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 13815:2006 | Fibrous gypsum plaster casts. Definitions, requirements and test methods |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| BS EN 10223-1:2012 | Steel wire and wire products for fencing and netting Zinc and zinc-alloy coated steel barbed wire |
| UNE-EN 10223-5:2013 | Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
| BS EN 10223-7:2012 | Steel wire and wire products for fencing and netting Steel wire welded panels for fencing |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| UNE-EN 10223-7:2013 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| UNE-EN 10264-1:2012 | Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
| UNE-EN 14195:2015 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| UNE-EN 14475:2011 | Execution of special geotechnical works - Reinforced fill |
| BS EN 10257-1:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables Land cables |
| BS EN 10257-2:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables Submarine cables |
| DIN EN 10270-1:2017-09 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| UNE-EN 10223-2:2013 | Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| UNE-EN 10223-6:2013 | Steel wire and wire products for fencing and netting - Part 6: Steel wire chain link fencing |
| UNE-EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| UNE-EN 10264-3:2012 | Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
| UNE-EN 10257-1:2012 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| BS EN 10223-4:2012 | Steel wire and wire products for fencing and netting Steel wire welded mesh fencing |
| EN 13815:2006 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| EN 14475:2006/AC:2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| EN 1993-1-11:2006/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| EN 13914-2:2016 | Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering |
| 15/30315105 DC : 0 | BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER |
| PD CEN/TR 16239:2011 | Installation rules of fibrous (gypsum) plaster works |
| BS EN 50189:2000 | Conductors for overhead lines. Zinc coated steel wires |
| I.S. EN 1993-1-11:2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS (INCLUDING IRISH NATIONAL ANNEX) |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15381 E : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 08/30189628 DC : 0 | BS EN 10257-2 - ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES |
| 16/30292322 DC : 0 | BS ISO 19203 - HOT-DIP GALVANIZED AND ZINC-ALUMINIUM COATED HIGH TENSILE STEEL WIRE FOR BRIDGE CABLES - SPECIFICATIONS |
| BS EN 15381:2008 | Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays |
| I.S. EN 50540:2010 | CONDUCTORS FOR OVERHEAD LINES - ALUMINIUM CONDUCTORS STEEL SUPPORTED (ACSS) |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 10223-2 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. CEN/TR 15124:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM PLASTERING SYSTEMS |
| UNE-EN 13815:2012 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| UNE-EN 16820:2018 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| DIN EN 10257-1:2012-02 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| BS EN 1993-1-11:2006 | Eurocode 3. Design of steel structures Design of structures with tension components |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN 10223-5:2012 | Steel wire and wire products for fencing and netting Steel wire woven hinged joint and knotted mesh fencing |
| UNE-EN 10223-4:2013 | Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing |
| BS EN 10223-6:2012 | Steel wire and wire products for fencing and netting Steel wire chain link fencing |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| CEN/TR 15123:2005 | Design, preparation and application of internal polymer plastering systems |
| EN 10223-1:2012 | Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire |
| EN 10223-6:2012 | Steel wire and wire products for fencing and netting - Part 6: Steel wire chain link fencing |
| UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| CEN/TR 15125:2005 | Design, preparation and application of internal cement and/or lime plastering systems |
| DIN EN 10264-1:2012-03 | STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS |
| EN 10264-3:2012 | Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
| CEN/TR 15124:2005 | Design, preparation and application of internal gypsum plastering systems |
| EN 50288-7:2005 | Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables |
| DIN EN 10264-3:2012-03 | Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
| UNE-EN 10270-1:2012 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| EN 10244-1:2009/AC:2011 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| ASTM B 750 : 2016 : REDLINE | Standard Specification for GALFAN |
| EN 1179:2003 | Zinc an zinc alloys - Primary zinc |
| ISO 7989-2:2007 | Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 2: Zinc or zinc-alloy coating |
| ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
| ISO 7989-1:2006 | Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.