Name: EN 10310:2003
Brand: CEN

Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings

Published date

17-12-2003

Publisher

Comite Europeen de Normalisation

1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Information to be supplied by the purchaser
   5.1 Mandatory
   5.2 Options indicated by the purchaser
6 Description of the coating
7 Application of the coating
   7.1 Surface preparation
   7.2 Primer preparation
   7.3 Polyamide application
   7.4 Coating fusion
8 Requirements of the applied coating
   8.1 General
   8.2 Appearance and continuity
   8.3 Thickness of the coating system
   8.4 Cut back at the tube ends
   8.5 Holiday detection
   8.6 Impact resistance
   8.7 Adhesion
   8.8 Indentation resistance
   8.9 Electrical insulation resistance
   8.10 Elongation at break
   8.11 Resistance to ultraviolet radiation
   8.12 Cathodic disbondment
   8.13 Salt spray resistance
   8.14 Demineralized water immersion
   8.15 Flexibility
   8.16 Waste water resistance
9 Repairs
10 Handling, transportation and storage
   10.1 Handling
   10.2 Transportation to storage areas
   10.3 Storage
   10.4 Loading to tubes and components for delivery
Annex A (normative) Holiday detection test
        A.1 General
        A.2 Apparatus
        A.3 Procedure
        A.4 Results
Annex B (normative) Adhesion test
        B.1 General
        B.2 Apparatus
        B.3 Procedure
        B.4 Results
Annex C (normative) Specific electrical insulation resistance test
        C.1 General
        C.2 Apparatus
        C.3 Procedure
        C.4 Results
Annex D (normative) Resistance to ultraviolet radiation
        D.1 General
        D.2 Apparatus
        D.3 Procedure
        D.4 Results
Annex E (normative) Cathodic disbondment test
        E.1 General
        E.2 Apparatus
        E.3 Sampling
        E.4 Procedure
        E.5 Results
Annex F (normative) Demineralized water immersion test
        F.1 General
        F.2 Apparatus
        F.3 Procedure
        F.4 Results
Annex G (normative) Flexibility test
        G.1 General
        G.2 Apparatus
        G.3 Procedure
Annex H (normative) Waste water resistance test
        H.1 General
        H.2 Apparatus
        H.3 Procedure
        H.4 Results
Annex I (normative) Viscosity analysis test
        I.1 General
        I.2 Equipment
        I.3 Procedure
        I.4 Results

The purpose of this standard is to define the internal and/or external coatings of polyamide powders applied by dipping in a fluidised bed or by spraying, or by roto-coating. These coatings are intended for protecting the outer and inner surface of steel tubes and their fittings (components) used as pipeline component parts. This standard may be applied for accessories (such as valves, pumps, screens, etc ... ).This type of coating is used for the protection of buried, submerged or above ground pipelines conveying fluids at working temperatures between 0 °C and + 60 °C. Other working service temperature may be used after agreement between the purchaser and the coater.The coatings covered by this standard are applicable to longitudinally or spirally welded steel tubes and to seamless steel tubes and their fittings components used for the construction of pipelines conveying liquids.The internal coating of tubes to be used for the transportation of water intended for human consumption shall not affect the quality of that water to such an extent that it fails to comply with the requirements of the EU and EFTA regulations.For this purpose, reference shall be made to the relevant national regulations and standards, transposing EN standards when available, dealing with the influence of materials on water quality and to the requirements for coatings.NOTEAn European Acceptance Scheme (EAS) is in course of development in relation to the CPD and the DWD. Its requirements will be introduced in this standard when completed.

Committee	CEN/TC 459/SC 10
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Current

Standards	Relationship
NS EN 10310 : 1ED 2004	Identical
UNE-EN 10310:2011	Identical
NBN EN 10310 : 2004	Identical
UNI EN 10310 : 2004	Identical
NF EN 10310 : 2004	Identical
BS EN 10310:2003	Identical
PN EN 10310 : 2004	Identical
NEN EN 10310 : 2004	Identical
SN EN 10310 : 2004	Identical
I.S. EN 10310:2004	Identical
DIN EN 10310:2004-07	Identical
UNE-EN 10310:2003	Identical

I.S. EN 10329:2006	STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
ÖNORM EN 14525:2023 01 01	Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
10/30216654 DC : 0	BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
DIN EN 12842:2012-11	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
UNE-EN 545:2011	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
I.S. EN 12842:2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
I.S. EN 545:2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
BS EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 10329 : 2005	STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
UNE-EN 12842:2013	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
UNI EN 12842 : 2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
UNI EN 545 : 2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
PREN 12842 : DRAFT 2010	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
BS EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
EN 10329:2006	Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
DIN EN 545:2011-09	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
DIN EN 10329:2006-04	STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS

EN ISO 4287:1998/A1:2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
EN ISO 62:2008	Plastics - Determination of water absorption (ISO 62:2008)
EN ISO 1183-3 : 1999	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD
EN ISO 6272 : 1994	PAINTS AND VARNISHES - FALLING-WEIGHT TEST
EN ISO 60:1999	Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977)
EN ISO 3146:2000/AC:2003	PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS
ISO 6441:1984	Paints and varnishes Indentation test (spherical or pyramidal)
EN ISO 7253 : 2001	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
EN ISO 868:2003	Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 8501-1:2007	Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007)
ISO 3105:1994	Glass capillary kinematic viscometers — Specifications and operating instructions
EN ISO 527-3:1995/AC:2002	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
EN ISO 4892-2:2013	Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN ISO 2808:2007	Paints and varnishes - Determination of film thickness (ISO 2808:2007)

View more information

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

EN 10310:2003

Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory