EN 10340:2007/AC:2008
Current
The latest, up-to-date edition.
06-08-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designation
6 Manufacture
7 Requirements
8 Testing and documents on material testing
9 Identification and marking
10 Packaging and surface protection
11 Complaints
12 Dangerous substances
13 Evaluation of conformity
Annex A - Welding conditions
Annex B (normative) - Evaluation of conformity
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 89/106/EEC, EU Construction
Products Directive
Bibliography
Pertains to steel castings for structural uses in buildings and civil engineering works. Its uses include housing and service buildings, bridges, roads, pipe network.
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
SN EN 10340 : 2008 CORR 2008 | Identical |
UNI EN 10340 : 2008 | Identical |
NF EN 10340 : 2007 | Identical |
UNE-EN 10340:2008 | Identical |
NEN EN 10340 : 2007 C1 2008 | Identical |
BS EN 10340:2007 | Identical |
NBN EN 10340 : 2008 COR 2008 | Identical |
I.S. EN 10340:2007 | Identical |
DIN EN 10340:2008-01 | Identical |
PN EN 10340 : 2009 | Identical |
NS EN 10340 : 2007 AC 2008 | Identical |
PREN 1337-8 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
18/30365854 DC : 0 | BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
EN 1337-8:2007 | Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1337-8:2008-01 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
17/30357386 DC : 0 | BS EN 13001-3-5 AMD 1 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED AND CAST HOOKS |
PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
PREN 1337-6 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 1337-8:2007 | Structural bearings Guide bearings and restraint bearings |
UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
I.S. EN 1337-8:2007 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1337-8 E : 2008 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
ISO 9001:2015 | Quality management systems — Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.