EN 1146:2005
Current
The latest, up-to-date edition.
05-10-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Classification
6 Requirements
6.1 General
6.2 Ergonomics
6.3 Design
6.4 Materials
6.5 Cleaning and disinfecting
6.6 Mass
6.7 Connections
6.8 Harness
6.9 Handling
6.10 Leak tightness
6.11 Hood
6.12 Exhalation valves
6.13 Temperature performance and flammability resistance
6.14 Protection against particulate matter
6.15 High and medium pressure parts
6.16 High, medium and low pressure connections
6.17 Pressure vessel(s)
6.18 Pressure vessel seal
6.19 Pressure reducer
6.20 Pressure relief valve
6.21 Pressure indicator
6.22 Flexible hoses and tubes
6.23 Mechanical strength
6.24 Performance requirements
6.25 Protection against environment
6.26 Practical performance
7 Testing
7.1 General
7.2 Nominal values and tolerances
7.3 Visual inspection
7.4 Mechanical strength
7.5 Resistance to temperature
7.6 Leak tightness of the ready for use apparatus
7.7 Rated working duration
7.8 Insulation resistance of non-metallic carrying/storage
containers
7.9 Carbon dioxide content of the inhalation air
7.10 Flammability
7.11 Pressure reducer
7.12 Practical performance
7.13 Inhalation and exhalation breathing resistance
7.14 Inward leakage
8 Marking
9 Information supplied by the manufacturer
Annex A (normative) Methods of measurement of the electrical
resistance of the carrying/storage container
A.1 Voltmeter ammeter method
A.2 Comparative method
Annex B (informative) Marking
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or
other provisions of EU Directives
Annex ZB (informative) Relationship between this European
Standard and the Essential
Requirements of EU Directive 97/23/EC (PED)
Bibliography
This European Standard specifies minimum requirements for self-contained open-circuit compressed air breathing apparatus for escape only, incorporating a hood.Such equipment is intended for use in work situations where the risk on overpressurisation of the pressure vessels with their valves due to hot environmental conditions is low.Laboratory and practical performance tests are included for the assessment of compliance with the requirements.This European Standard does not apply to apparatus for work or to diving devices.
| Committee |
CEN/TC 79
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 1146:2006 | Identical |
| NBN EN 1146 : 2006 | Identical |
| DIN EN 1146:2005-12 | Identical |
| NBN EN 1073-1 : 2016 COR 2016 | Identical |
| NS EN 1146 : 2ED 2006 | Identical |
| BS EN 1146:2005 | Identical |
| PN EN 1146 : 2007 | Identical |
| NEN EN 1146 : 2005 | Identical |
| UNI EN 1146 : 2006 | Identical |
| SN EN 1146 : 2005 | Identical |
| SANS 51146 : 2ED 2006(R2014) | Identical |
| NF EN 1146 : 2006 | Identical |
| I.S. EN 1146:2005 | Identical |
| 17/30360256 DC : 0 | BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| EN 133:2001 | Respiratory protective devices - Classification |
| 09/30196766 DC : 0 | BS ISO 23269-4 - SHIPS AND MARINE TECHNOLOGY - BREATHING APPARATUS FOR SHIPS - PART 4: SELF-CONTAINED BREATHING APPARATUS FOR EMERGENCY ESCAPE REQUIRED BY THE IMO IBC AND IGC CODES |
| BS ISO 23269-1:2008 | Ships and marine technology. Breathing apparatus for ships Emergency escape breathing devices (EEBD) for shipboard use |
| 03/112290 DC : DRAFT AUG 2003 | BS EN 529 - RESPIRATORY PROTECTIVE DEVICES - RECOMMENDATIONS FOR SELECTION, USE, CARE AND MAINTENANCE - GUIDANCE DOCUMENT |
| ISO 16073:2011 | Wildland firefighting personal protective equipment Requirements and test methods |
| BS EN 133:2001 | Respiratory protective devices. Classification |
| BS EN 134:1998 | Respiratory protective devices. Nomenclature of components |
| I.S. EN 133:2002 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| 03/118604 DC : 0 | ISO 23269-1 - SHIPS AND MARINE TECHNOLOGY - BREATHING APPARATUS FOR SHIPS - PART 1: EMERGENCY ESCAPE BREATHING DEVICES (EEBD) FOR SHIPBOARD USE |
| 13/30282508 DC : 0 | BS EN 1073-1 - PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
| DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| ISO 23269-4:2010 | Ships and marine technology — Breathing apparatus for ships — Part 4: Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes |
| BS ISO 16073:2011 | Wildland firefighting personal protective equipment. Requirements and test methods |
| UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| BS EN 529:2005 | Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document |
| BS EN 132:1999 | Respiratory protective devices. Definitions of terms and pictograms |
| BS EN 1073-2:2002 | Protective clothing against radioactive contamination Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
| PREN 1073-1 : DRAFT 2013 | PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
| BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| EN 529:2005 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| DIN EN 133:2002-02 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| DIN EN 529:2006-01 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| EN 1073-2:2002 | Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 1975:1999/A1:2003 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS ALUMINIUM AND ALUMINIUM ALLOY GAS CYLINDERS OF CAPACITY FROM 0.5 LITRE UP TO 150 LITRE |
| ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
| EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| EN ISO 7854 : 1997 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO DAMAGE BY FLEXING |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 1964-1:1999/AC:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
| EN ISO 4674-2:1998 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 2: BALLISTIC PENDULUM METHOD |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| EN 13274-3:2001 | Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance |
| EN 1964-3:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
| EN 13274-4:2001 | Respiratory protective devices - Methods of test - Part 4: Flame tests |
| EN 13274-6:2001 | Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| EN 1964-2 : 2001 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES - PART 2: CYLINDERS MADE OF SEAMLESS STEEL WITH AN R[M] VALUE OF 1 100 MPA AND ABOVE |
| EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
| ISO 4674-2:1998 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 2: Ballistic pendulum method |
| EN 13274-1:2001 | Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| EN 13274-2:2001 | Respiratory protective devices - Methods of test - Part 2: Practical performance tests |
| EN 13274-5:2001 | Respiratory protective devices - Methods of test - Part 5: Climatic conditions |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.