EN 12195-4:2003
Current
The latest, up-to-date edition.
17-12-2003
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
5.1 General
5.2 Construction of lashing steel wire ropes and flat
lashing steel wire ropes
5.2.1 Wire ropes
5.2.2 Formation of eyes
5.2.3 Length
5.2.4 Lashing capacity (LC) for a single leg
lashing steel wire rope
5.3 Tensioning devices
5.4 Connecting components
5.5 Tension force indicator (optional)
5.6 Mechanical properties
5.6.1 Lashing capacity (LC)
5.6.2 Proof force
5.6.3 Breaking force (BF)
6 Verification of safety requirements and type testing
6.1 General
6.2 Test frequency
6.3 Tensile testing of a lashing steel wire rope and
flat lashing steel wire rope
7 Instructions for use
8 Marking
9 Manufacturer's certificate
Annex A (normative) Hazards
Annex B (normative) Specification for information for
use and maintenance to be provided by the
manufacturer
Bibliography
This Part 4 of EN 12195- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).
| Committee |
CEN/TC 168
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 12195-4 : 2004 | Identical |
| I.S. EN 12195-4:2004 | Identical |
| UNI EN 12195-4 : 2005 | Identical |
| DIN EN 12195-4:2004-04 | Identical |
| NS EN 12195-4 : 1ED 2004 | Identical |
| UNE-EN 12195-4:2004 | Identical |
| SANS 52195-4 : 1ED 2007(R2013) | Identical |
| NF EN 12195-4 : 2004 | Identical |
| SN EN 12195-4 : 2004 | Identical |
| PN EN 12195-4 : 2004 | Identical |
| NBN EN 12195-4 : 2004 | Identical |
| BS EN 12195-4:2003 | Identical |
| SANS 52195-4:2007(R2022) | Identical |
| I.S. EN 12195-1:2010 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
| BS EN 12195-1:2010 | Load restraining on road vehicles. Safety Calculation of securing forces |
| VDI 2700 Blatt 16:2009-07 | Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| VDI 2700 Blatt 17:2009-04 | Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers |
| VDI 3968 Blatt 1:2013-04 | Securing of load units - Specification of requirements |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| VDI 2700 Blatt 19:2011-01 | Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel |
| VDI 2700 Blatt 2:2014-07 | Securing of loads on road vehicles - Calculation of tie-down forces - Fundamentals |
| VDI 2700:2004-11 | Securing of loads on road vehicles |
| VDI 2700 Blatt 7:2014-07 | Securing of loads on road vehicles - Safety of loads in combined transport |
| VDI 2700 Blatt 11:2006-10 | Securing of loads on road vehicles - Securing of reinforcing steel |
| VDI 2700 Blatt 3.1:2006-10 | Securing of loads on road vehicles - Instruction manual for lashings |
| VDI 2700 Blatt 10.1:2016-11 | Securing of loads on road vehicles - Securing of precast concrete elements - Plane concrete elements |
| VDI 2700 Blatt 12:2009-01 | Securing of loads on road vehicles - Securing of beverage products |
| VDI 2700 Blatt 3.2:2006-09 | Securing of loads on road vehicles - Vehicles equipments and securing aids for load |
| 08/30173492 DC : DRAFT JAN 2008 | BS EN 12195-1 - LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
| STANAG 2830 : 2009 | MATERIAL HANDLING AIDS |
| UNE-EN 12195-1:2011 | Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces |
| EN 12195-1:2010/AC:2014 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
| 17/30354108 DC : 0 | BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN 12195-1:2011-06 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
| EN 12385-4:2002+A1:2008 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
| EN 1677-4:2000+A1:2008 | Components for slings - Safety - Part 4: Links, Grade 8 |
| EN 12195-1:2010/AC:2014 | LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES |
| EN 13411-2:2001+A1:2008 | Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| EN 1677-2:2000+A1:2008 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
| EN 12195-3:2001 | Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| PREN 13411-3 : DRAFT 1999 | TERMINATION FOR STEEL WIRE ROPES - SAFETY - PART 3 - FERRULE-SECURED EYES |
| EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 1677-6:2001+A1:2008 | Components for slings - Safety - Part 6: Links - Grade 4 |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.