EN 12237:2003
Current
Current
The latest, up-to-date edition.
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
Published date
02-04-2003
Publisher
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Classification
5 Requirements
5.1 Leakage
5.2 Strength
6 Test rig specification
7 Test procedure strength and leakage
7.1 Test sample
7.2 Test method
7.3 Correction of leakage test result
8 Test report
Annex A (informative) Recommended procedure if the permitted
air leakage rate is exceeded when testing a specific
installation
Bibliography
This standard specifies requirements and test methods for strength and air leakage of circular ductwork used in air conditioning and ventilation systems in buildings. The standard is intended to establish the mechanical strength and leakage required to verify the fitness for the intended service as installed ductwork. The standard is primarily intended for in-situ measurements, but provisions are also made for its use in laboratory testing. The requirements and methods are applicable also to rectangular ductwork in respect of air leakage.
| Committee |
CEN/TC 156
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 12237 : 2003 | Identical |
| NS EN 12237 : 1ED 2003 | Identical |
| NEN EN 12237 : 2003 | Identical |
| NF EN 12237 : 2003 | Identical |
| BS EN 12237:2003 | Identical |
| DIN EN 12237:2003-07 | Identical |
| I.S. EN 12237:2003 | Identical |
| UNI EN 12237 : 2004 | Identical |
| SN EN 12237 : 2003 | Identical |
| PN EN 12237 : 2005 | Identical |
| UNE-EN 12237:2003 | Identical |
| PREN 1506 : DRAFT 2004 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH CIRCULAR CROSS-SECTION - DIMENSIONS |
| 07/30167140 DC : 0 | BS EN 15727 - VENTILATION FOR BUILDINGS - DUCTWORK - TECHNICAL DUCTWORK PRODUCTS, LEAKAGE CLASSIFICATION AND TESTING |
| DIN EN 15727 E : 2010 | VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| I.S. EN 13779:2007 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| I.S. EN 12097:2006 | VENTILATION FOR BUILDINGS - DUCTWORK - REQUIREMENTS FOR DUCTWORK COMPONENTS TO FACILITATE MAINTENANCE OF DUCTWORK SYSTEMS |
| 09/30208460 DC : 0 | BS EN 15727 - VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| BS EN 15242:2007 | Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration |
| DIN EN 15727:2010-10 | Ventilation for buildings - Ducts and ductwork components, leakage classification and testing |
| 17/30356593 DC : 0 | BS EN ISO 15138 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| PD CEN/TR 14788:2006 | Ventilation for buildings. Design and dimensioning of residential ventilation systems |
| BS EN ISO 15138:2007 | Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning |
| I.S. EN 16798-5-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-1: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION AND AIR CONDITIONING SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 1: DISTRIBUTION AND GENERATION |
| UNI EN ISO 15138 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| PREN 15871 : DRAFT 2008 | VENTILATION FOR BUILDINGS - FIRE RESISTING DUCT SECTIONS |
| BS EN 14134:2004 | Ventilation for buildings. Performance testing and installation checks of residential ventilation systems |
| UNI EN 1507 : 2008 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS WITH RECTANGULAR SECTION - REQUIREMENTS FOR STRENGTH AND LEAKAGE |
| EN 16798-3:2017 | Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4) |
| EN 16798-5-2:2017 | Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation |
| DIN EN 14239 E : 2004 | VENTILATION FOR BUILDINGS - DUCTWORK - MEASUREMENT OF DUCTWORK SURFACE AREA |
| BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| BS EN 1507:2006 | Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage |
| BS EN 14239:2004 | Ventilation for buildings. Ductwork. Measurement of ductwork surface area |
| EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| CEN/TR 14788:2006 | Ventilation for buildings - Design and dimensioning of residential ventilation systems |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| 15/30297468 DC : 0 | BS EN 16798-3 - ENERGY PERFORMANCE OF BUILDINGS - PART 3: VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| UNI EN 15423 : 2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| DIN EN 16798-5-2 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| BS EN 15727:2010 | Ventilation for buildings. Ducts and ductwork components, leakage classification and testing |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| PD CEN/TR 16798-4:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| I.S. EN 16798-5-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| DIN EN 15423 E : 2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN 16798-5-2:2015-06 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| I.S. EN ISO 15138:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| S.R. CEN/TR 16798-18:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS PART 18: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-17 - GUIDELINES FOR INSPECTION OF VENTILATION AND AIR-CONDITIONING SYSTEMS (MODULES M4-11, M5-11, M6-11, M7-11) |
| I.S. EN 15727:2010 | VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| I.S. EN 16282-5:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| DIN EN 1507:2006-07 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| I.S. EN 1366-1:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| I.S. EN 1886:2007 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - MECHANICAL PERFORMANCE |
| DIN EN 1886:2009-07 | Ventilation for buildings - Air handling units - Mechanical performance |
| I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN 1366-1:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| I.S. EN 1506:2007 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH CIRCULAR CROSS-SECTION - DIMENSIONS |
| VDI 2052 Blatt 1:2017-04 | Air conditioning - Kitchens (VDI Ventilation Code of Practice) |
| VDI 2262 Blatt 3:2011-06 | Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures |
| VDI 6028 Blatt 1.1:2013-11 | Assessment criteria for Building Services - Technical quality for sustainable buildings |
| VDI 3805 Blatt 1:2011-10 | Product data exchange in the Building Services - Fundamentals |
| VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
| VDI 2083 Blatt 4.2:2011-04 | Cleanroom technology - Energy efficiency |
| BS EN 16282-5:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning |
| BS EN 15423:2008 | Ventilation for buildings. Fire precaution for air distribution systems in buildings |
| 08/30187193 DC : 0 | BS EN 15871 - VENTILATION FOR BUILDINGS - THE PRODUCT STANDARD FOR FIRE RATED DUCTS |
| 15/30299483 DC : 0 | BS EN 16798-5-1 - ENERGY PERFORMANCE OF BUILDINGS - MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION AND AIR CONDITIONING SYSTEMS - PART 5-1: DISTRIBUTION AND GENERATION (REVISION OF EN 15241) - METHOD 1 |
| PD CEN/TR 16798-18:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-17. Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11) |
| 06/30159392 DC : DRAFT NOV 2006 | BS EN 1506 - VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH CIRCULAR CROSS-SECTION - DIMENSIONS |
| 10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| PREN 14134 : DRAFT 2017 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| I.S. EN 14134:2004 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| UNI EN 15727 : 2010 | VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| EN 14134:2004 | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
| DIN EN 1506:2007-09 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| UNI EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 1886 : 2008 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - MECHANICAL PERFORMANCE |
| UNI EN 13779 : 2008 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| UNI EN 1506 : 2008 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH CIRCULAR CROSS-SECTION - DIMENSIONS |
| CEN/TR 16798-4:2017 | Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| 11/30244204 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| BS EN 16798-5-2:2017 | Energy performance of buildings. Ventilation for buildings Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 2: Distribution and generation |
| 14/30303753 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| UNI EN 15242 : 2008 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| 17/30332530 DC : 0 | BS EN 14134 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| DIN EN 15242:2007-09 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| DIN EN 16798-3 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| 04/30113869 DC : 0 | EN 1506 - VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH CIRCULAR CROSS-SECTION - DIMENSION |
| 15/30316978 DC : 0 | BS EN 16798-5-2 - ENERGY PERFORMANCE OF BUILDINGS - MODULES M5-6, M5-8 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS - PART 5-2: DISTRIBUTION AND GENERATION (REVISION OF EN 15241) - METHOD 2 |
| 06/30127203 DC : DRAFT OCT 2006 | ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING |
| 05/30129351 DC : DRAFT FEB 2005 | EN 12097 - VENTILATION FOR BUILDINGS - DUCTWORK - REQUIREMENTS FOR DUCTWORK COMPONENTS TO FACILITATE MAINTENANCE OF DUCTWORK SYSTEMS |
| 08/30176919 DC : DRAFT SEP 2008 | BS EN 1366-1 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| CEN/TR 16798-18:2017 | Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11) |
| EN 16798-5-1:2017 | Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation |
| EN ISO 15138:2007 | Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| BS EN 1886:2007 | Ventilation for buildings. Air handling units. Mechanical performance |
| BS EN 1366-1:2014 | Fire resistance tests for service installations Ventilation ducts |
| UNE-EN 1366-1:2016 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| BS EN 1506:2007 | Ventilation for buildings. Sheet metal air ducts and fittings with circular cross-section. Dimensions |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| DIN EN 14134:2004-04 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| EN 15423:2008 | Ventilation for buildings - Fire precautions for air distribution systems in buildings |
| EN 1506:2007 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 16282-5:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning |
| EN 14239:2004 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| EN 15727:2010 | Ventilation for buildings - Ducts and ductwork components, leakage classification and testing |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| 05/30128661 DC : 0 | EN 13779 - VENTILATION FOR NON RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| UNE-EN 15727:2010 | Ventilation for buildings - Ducts and ductwork components, leakage classification and testing |
| DIN EN 15242 E : 2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| DIN EN 15423:2008-09 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| DIN EN 16798-3:2017-11 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| BS EN 16798-5-1:2017 | Energy performance of buildings. Ventilation for buildings Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 1: Distribution and generation |
| 05/30128642 DC : 0 | PREN 15242 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| I.S. EN 15242:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| ISO 15138:2007 | Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning |
| S.R. CEN/TR 16798-4:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| I.S. CEN TR 14788:2006 | VENTILATION FOR BUILDINGS - DESIGN AND DIMENSIONING OF RESIDENTIAL VENTILATION SYSTEMS |
| I.S. EN 15423:2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| I.S. EN 16798-3:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 3: FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| BS EN 12097:2006 | Ventilation for buildings. Requirements for ductwork components to facilitate maintenance of ductwork systems |
| DIN EN 16798-5-2:2017-11 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION |
| DIN EN 13779:2007-09 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 14239:2004-04 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area; German Version EN 14239:2004 |
| DIN EN 12097:2006-11 | Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
| EN 1505:1997 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
| PREN 1507 : DRAFT 1994 | VENTILATION FOR BUILDINGS - DUCTWORK - RECTANGULAR SHEET METAL AIR DUCTS - STRENGTH AND LEAKAGE - REQUIREMENTS AND TESTING |
| ENV 1201997 : 1997 | VENTILATION FOR BUILDINGS - DUCTWORK - REQUIREMENTS FOR DUCTWORK COMPONENTS TO FACILITATE MAINTENANCE OF DUCTWORK SYSTEMS |
| EN 1506:2007 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| CR 12792 : 1997 | VENTILATION FOR BUILDINGS - SYMBOLS AND TERMINOLOGY |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.