EN 12273:2008
Current
The latest, up-to-date edition.
Slurry surfacing - Requirements
09-04-2008
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements
5.1 Constituent materials
5.1.1 General
5.1.2 Binders
5.1.3 Aggregates
5.1.4 Grading curves
5.2 Slurry surfacing
5.2.1 Defects as determined by visual assessment
5.2.2 Skid resistance
5.2.3 Characterising noise generation (other
characteristics)
5.3 Durability
5.3.1 General
5.3.2 Skid resistance
5.3.3 Bond
6 Evaluation of conformity
Annex A (normative) - Factory Production Control (FPC)
A.1 General
A.2 General requirements
A.3 Product specific requirements
Annex B (normative) - Minimum test frequencies for Factory
Production Control (FPC)
Annex C (normative) - Type Approval Installation Trial (TAIT)
C.1 General
C.2 Requirements
C.3 Records
C.4 Information availability
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Product Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for attestation of conformity of slurry
surfacing
ZA.3 CE marking and labelling
Bibliography
This European Standard specifies the performance requirements and control procedures for the installation of slurry surfacing as a product for the surface treatment of roads and other trafficked areas (e.g. footways, cycleways).This European Standard is not designed for small areas of slurry surfacing on roads that are less than 500 m2 which are not contiguous (for example minor repairs).This European Standard does not apply to slurry surfacing designed by the purchaser.This European Standard is not applicable to slurry surfacing carried out in tunnels in terms of reaction to fire. No such regulations have yet been identified, nor is there any method of classification of reaction to fire.NOTEMember States can call up the technical requirements of this European Standard for use in tunnels.This European Standard is not designed for pavements that are covered by international regulations, for example, International Civil Aviation Organisation (ICAO) regulations (airfields).
| Committee |
CEN/TC 227
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 12273:2008 | Identical |
| DIN EN 12273:2008-08 | Identical |
| NF EN 12273 : 2008 | Identical |
| NEN EN 12273 : 2008 | Identical |
| UNE-EN 12273:2009 | Identical |
| NS EN 12273 : 1ED 2008 | Identical |
| BS EN 12273:2008 | Identical |
| NBN EN 12273 : 2008 | Identical |
| UNI EN 12273 : 2008 | Identical |
| SN EN 12273 : 2008 | Identical |
| PN EN 12273 : 2011 | Identical |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN 14895:2006 | Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| ISO 13473-1:1997 | Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 13589:2008 | Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| EN ISO 11819-1:2001 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997) |
| ISO 11819-1:1997 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| EN 12274-7 : 2005 | Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
| EN 12274-8:2005 | Slurry surfacing - Test methods - Part 8: Visual assessment of defects |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 13036-1:2010 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
| EN 933-6:2014 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
| EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| EN 13588:2017 | Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
| EN ISO 13473-1 : 2004 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| EN 12846:2002 | Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer |
| EN 13074:2002 | Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation |
| EN 933-5:1998/A1:2004 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.