Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12542:2010

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
Superseded date

01-09-2020

Published date

04-08-2010

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Design
6 Openings
7 Workmanship and manufacture
8 Non-pressure attachments
9 Inspection and testing
10 Surface treatment and finishing
11 Marking and certification
12 Records and documentation
Annex A (normative) Design pressure and filling conditions
Annex B (normative) Tolerances on tanks
Annex C (normative) Hydraulic pressure test
Annex D (normative) Imperfections
Annex E (normative) Design formulae for tanks
Annex F (informative) Measurement of shell peaking
Annex G (informative) Examples of joints
Annex H (informative) Method for determining reflectivity
        indices (above ground tanks)
Annex I (normative) External protection of underground tanks
Annex J (informative) Environmental check list
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 97/23/EC
Bibliography

This European Standard specifies requirements for the design and manufacture of static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) with a volume not greater than 13 m³ and for installation above or below ground.

DevelopmentNote
Supersedes EN 14075. (08/2010)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
ONORM EN 12542 : 2010 Identical
DIN EN 12542:2010-12 Identical
NF EN 12542 : 2011 Identical
NBN EN 12542 : 2010 Identical
UNE-EN 12542:2011 Identical
NEN EN 12542 : 2010 Identical
NS EN 12542 : 1ED 2010 Identical
I.S. EN 12542:2010 Identical
PN EN 12542 : 2010 Identical
SN EN 12542 : 2010 Identical
UNI EN 12542 : 2010 Identical
BS EN 12542:2010 Identical

DIN EN 16125:2016-03 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
12/30263594 DC : 0 BS EN 14570 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
10/30227668 DC : 0 BS EN 14678-3 - LPG EQUIPMENT AND ACCESSORIES - PART 3: REFUELLING INSTALLATIONS AT PRIVATE AND INDUSTRIAL PREMISES
I.S. EN 13565-1:2004 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
DIN EN 13109:2011-04 LPG equipment and accessories - LPG tanks and drums - Disposal
DIN EN 14678-2:2012-04 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements (includes Amendment A1:2012)
BS EN 14678-2 : 2007 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
I.S. EN 14678-2:2007 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
DIN EN 14678-3:2013-03 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
16/30341197 DC : 0 BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
PREN 14570 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
BS EN 13565-1 : 2003 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
05/30125032 DC : DRAFT JUL 2005 EN 14678-2 - LPG EQUIPMENT AND ACCESSORIES - EQUIPMENT FOR LIQUEFIED PETROLEUM GAS AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS, AND INSTALLATION REQUIREMENTS
BS EN 14678-3:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises
02/711696 DC : DRAFT OCT 2002 EN 14570 - EQUIPPING OF LPG TANKS, OVERGROUND AND UNDERGROUND
I.S. EN 16125:2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
UNE-EN 14678-2:2009 LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements
EN 13565-1:2003+A1:2007 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
DIN EN 14570:2014-07 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
BS EN 13109:2010 LPG equipment and accessories. LPG tanks and drums. Disposal
I.S. EN 14570:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
I.S. EN 13109:2010 LPG EQUIPMENT AND ACCESSORIES - LPG TANKS AND DRUMS - DISPOSAL
BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
UNI EN 14678-3 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
DIN EN 13565-1:2016-08 (Draft) FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
BS EN 14570:2014 LPG equipment and accessories. Equipping of overground and underground LPG vessels
UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
UNI EN 13109 : 2011 LPG EQUIPMENT AND ACCESSORIES - LPG TANKS AND DRUMS - DISPOSAL
UNI EN 14570 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
UNI EN 14678-2 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
PREN 13565-1 : DRAFT 2016 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
UNE-EN 13109:2011 LPG equipment and accessories - LPG tanks and drums - Disposal
EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
EN 14678-2:2007+A1:2012 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements
EN 14570:2014 LPG equipment and accessories - Equipping of overground and underground LPG vessels
EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
UNE-EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
I.S. EN 14678-3:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
EN 13109:2010 LPG equipment and accessories - LPG tanks and drums - Disposal
UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN 462-2:1994 Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value
ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
EN 1708-1:2010 Welding - Basic welded joint details in steel - Part 1: Pressurized components
ISO 23277:2015 Non-destructive testing of welds Penetrant testing Acceptance levels
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
ISO 17635:2016 Non-destructive testing of welds — General rules for metallic materials
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 1321:1996 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
EN 756:2004 Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
EN ISO 5173:2010/A1:2011 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
EN 1714:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
ISO 14024:1999 Environmental labels and declarations Type I environmental labelling Principles and procedures
ISO 2560:2009 Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
EN ISO 23278 : 2015 NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015)
EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 895:1995 Destructive tests on welds in metallic materials - Transverse tensile test
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
ISO 5173:2009 Destructive tests on welds in metallic materials — Bend tests
ISO 23278:2015 Non-destructive testing of welds Magnetic particle testing Acceptance levels
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 14025:2010 Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)
EN 875:1995 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
EN ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
EN ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
ISO 17632:2015 Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification
EN 876:1995 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9162:2013 Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications
EN ISO 17632:2015 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
EN 13636:2004 Cathodic protection of buried metallic tanks and related piping
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 462-1:1994 Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
EN 1712:1997/A2:2004 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS
EN 14784-1:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems
EN 1713:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - CHARACTERIZATION OF INDICATIONS IN WELDS
EN 13109:2010 LPG equipment and accessories - LPG tanks and drums - Disposal
ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
EN 12517-1:2006 Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
EN 837-2:1997 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
EN 14717:2005 Welding and allied processes - Environmental check list
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 970:1997 Non-destructive examination of fusion welds - Visual examination
ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
ISO 17638:2016 Non-destructive testing of welds Magnetic particle testing
EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more