Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12560-6:2003

Current
Current

The latest, up-to-date edition.

Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
Published date

10-12-2003

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
  4.1 Range of class designations
  4.2 Range of gasket sizes
  4.3 Gasket types
  4.4 Information to be supplied by the purchaser
5 Constructional details
  5.1 General details
  5.2 Core
      5.2.1 Core materials
      5.2.2 Core welding
      5.2.3 Dressing of core welds
      5.2.4 Core flatness
  5.3 Serrations
  5.4 Location rings
      5.4.1 Integral ring
      5.4.2 Loose ring
  5.5 Facing materials
  5.6 Facing weight per unit area
  5.7 Attachment of facing
      5.7.1 Methods of attachment
      5.7.2 De-greasing of core
      5.7.3 Number of joins
      5.7.4 Excessive facing
  5.8 Integrity of facing attachment
  5.9 Typical construction details
6 Dimensions
7 Marking
8 Colour coding
9 Packaging
Annex A (informative) Information to be supplied by the purchaser
Annex B (informative) The use of metric bolting with class designated
        covered serrated metal gaskets
      B.1 General
      B.2 Comparable imperial & metric bolt sizes
      B.3 Gasket assembly guidance with metric bolting
      B.4 Imperial/metric bolt comparisons
Bibliography

This European Standard specifies the construction, dimensions and marking of covered serrated metal gaskets for use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900, Class 1500 and Class 2500 up to and including NPS 24. This document does not extend to serrated covered metal based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down can be applied to them.NOTE 1Dimensions of other types of gaskets for use with flanges to prEN 1759-1, prEN 1759-3 and prEN 1759-4 are given in EN 12560-1, EN 12560-2, EN 12560-3, EN 12560-4, EN 12560- 5 and prEN 12560-7.NOTE 2Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

Committee
CEN/TC 74
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

12/30247799 DC : DRAFT JAN 2012 BS EN 12560-2 - FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
PREN 13555 : DRAFT 2011 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
BS EN 14772:2005 Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
EN 12560-2:2013 Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
FSA MG 503 : 2006 SERRATED METAL GASKETS WITH COVERING LAYERS (SMCL) - STANDARD FOR RAISED AND FLAT FACED FLANGES PER ASME B16.47
DIN EN 14772 E : 2005 FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS
BS EN 1473:2016 Installation and equipment for liquefied natural gas. Design of onshore installations
I.S. EN 14772:2005 FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
EN 14772:2005 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
I.S. EN 12560-2:2013 FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
I.S. EN 13555:2014 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
EN 13555:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
VDI 2200:2007-06 Tight flange connections - Selection, calculation, design and assembly of bolted flange connections
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
03/114555 DC : DRAFT SEP 2003 EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
11/30248108 DC : 0 BS EN 13555 - FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
DIN 30690-1:2016-04 CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN 12560-2 : 2013 FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
FSA MG 502 : 2005 SERRATED METAL GASKETS WITH COVERING LAYERS (SMCL) - STANDARD FOR RAISED AND FLAT FACED FLANGES PER ASME B16.5
NF EN 14772 : 2005 FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
BS EN 13555:2014 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
BS EN 12560-2:2013 Flanges and their joints. Dimensions of gaskets for Class-designated flanges Spiral wound gaskets for use with steel flanges
BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
14/30297213 DC : 0 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
DIN EN 13555:2014-07 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
DIN EN 12560-2:2013-12 Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
DIN EN 14772:2005-04 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
UNI EN 13555 : 2014 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS

EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 1759-4:2003 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more