Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12828:2012+A1:2014

Current
Current

The latest, up-to-date edition.

Heating systems in buildings - Design for water-based heating systems
Published date

02-04-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 System design requirements
5 Instructions for operation, maintenance and use
6 Installation and commissioning
Annex A (informative) - Control system classification
Annex B (informative) - Thermal Environment
Annex C (informative) - Thermal insulation
Annex D (informative) - Guidance for dimensioning diaphragm
        expansion vessels and pressurisation systems
        (sealed systems)
Annex E (informative) - Safety valves for heating systems
Annex F (informative) - A-deviations
Bibliography

This European Standard specifies design criteria for water based heating systems in buildings with a maximum operating temperature of up to 105 °C. In case of heating systems with maximum operating temperatures over 105 °C other safety aspects than those described in 4.6 may apply. The other clauses of this European Standard are still valid for those systems.This European Standard does not amend product standards or product installation requirements. This standard covers the design of:-heat supply systems;-heat distribution systems;-heat emission systems;-control systems.This European Standard takes into account heating requirements of attached systems (e.g. domestic hot water, process heat, air conditioning, ventilation) in the design of a heat supply, but does not cover the design of these systems.This European Standard does not cover requirements for installation or commissioning or instructions for operation, maintenance and use of water based heating systems.This European Standard does not cover the design of fuel and energy supply systems.

Committee
CEN/TC 228
DevelopmentNote
2012 Edition Re-Issued in April 2014 & incorporates AMD 1 2014. (04/2014)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

17/30363953 DC : 0 BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
UNI EN 12977-4 : 2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES
UNI CEN/TS 12977-4 : 2010 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES
DIN EN 15316-2:2017-09 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING), MODULE M3-5, M4-5
05/30140625 DC : 0 EN 15377-2 - HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION
DIN EN 12977-1:2016-08 (Draft) THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
I.S. EN 15377-1:2008 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY
UNI EN 15377-2 : 2008 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION
I.S. EN 15316-2:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING), MODULE M3-5, M4-5
S.R. CEN TS 12977-1:2010 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
DIN EN 14336 E : 2005 HEATING SYSTEMS IN BUILDINGS - INSTALLATION AND COMMISSIONING OF WATER-BASED HEATING SYSTEMS
BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
CEN/TS 12977-4:2010 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
EN 12354-5:2009/AC:2010 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
I.S. EN 12354-5:2009 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
PREN 416 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
11/30247846 DC : 0 BS EN 12977-4 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES
DIN EN 15316-2 E : 2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING), MODULE M3-5, M4-5
I.S. EN 12977-4:2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES
DD CEN/TS 12977-1:2010 Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems
PREN 17175 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
BS EN 15316-2:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Space emission systems (heating and cooling), Module M3-5, M4-5
S.R. CEN/TR 15316-6-2:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 6-2: EXPLANATION AND JUSTIFICATION OF EN 15316-2, MODULE M3-5, M4-5
UNI EN 15377-1 : 2008 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY
05/30137882 DC : 0 EN 15316-1 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 1: GENERAL
BS EN 12977-4:2012 Thermal solar systems and components. Custom built systems Performance test methods for solar combistores
DIN EN 12354-5:2009-10 Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment
DIN EN 14336:2005-01 Heating systems in buildings - Installation and commissioning of water based heating systems; German version EN 14336:2004
DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
I.S. EN 14394:2006 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 15316-2-1:2007-10 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS
VDI 2067 Blatt 1:2012-09 Economic efficiency of building installations - Fundamentals and economic calculation
VDI 2073-1 : 2014 COR 1 2014 HYDRAULIC SYSTEMS IN BUILDING SERVICES - HYDRAULIC CIRCUITS
VDI 3811:2016-07 Refurbishment of heating installations
VDI 3809 Blatt 1:2011-09 Acceptance of building installations - Heating
VDI 3891:2015-07 Emission control - Human cremation facilities
VDI 4708 Blatt 1:2012-07 Pressure maintenance, venting, deaeration - Pressure maintenance
VDI 6028 Blatt 1.1:2013-11 Assessment criteria for Building Services - Technical quality for sustainable buildings
VDI 2035 Blatt 2:2009-08 Prevention of damage in water heating installations - Water-side corrosion
VDI 3805 Blatt 2:2016-01 Product data exchange in the building services - Heating value assemblies
VDI 6002 Blatt 1:2014-03 Solar heating for potable water - Basic principles - System technology and application in residential buildings
10/30196052 DC : 0 BS ISO 11855-2 - BUILDING ENVIRONMENT DESIGN - DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY
BS EN 12977-3:2012 Thermal solar systems and components. Custom built systems Performance test methods for solar water heater stores
BS EN 12977-1:2012 Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems
I.S. EN 15459:2007 ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS
I.S. EN ISO 11855-2:2015 BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY (ISO 11855-2:2012)
I.S. EN 15316-2-1:2007 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS
UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
PD CEN/TR 15316-6-2:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Explanation and justification of EN 15316-2, Module M3-5, M4-5
11/30247855 DC : 0 BS EN 12977-3 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES
BS EN ISO 11855-2:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems Determination of the design heating and cooling capacity
05/30140976 DC : 0 EN 15316-2-1 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2-1: SPACE HEATING EMISSION SYSTEMS
UNI CEN/TS 12977-1 : 2010 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
05/30140986 DC : 0 EN 15316-4-2 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS
ISO 23045:2008 Building environment design Guidelines to assess energy efficiency of new buildings
CEN/TR 15316-6-2:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5
EN 12977-1:2018 Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems
UNE-EN 12977-3:2012 Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores
DIN EN 15459 E : 2008 ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS
DIN EN 15450 E : 2007 HEATING SYSTEMS IN BUILDINGS - DESIGN OF HEAT PUMP HEATING SYSTEMS
DIN EN 14394 E : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14394:2008-12 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
UNI EN 15459 : 2008 ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS
UNI EN 14394 : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
UNI EN 12354-5 : 2009 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
14/30309947 DC : 0 BS EN 15316-2 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING)
BS EN 15377-2:2008 Heating systems in buildings. Design of embedded water based surface heating and cooling systems Design, dimensioning and installation
06/30156096 DC : 0 ISO CEN TS 12977-3 - PERFORMANCE TEST METHODS - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES
DD CEN/TS 12977-4 : DRAFT MAY 2010 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES
DD ENV 12977-3:2001 Thermal solar systems and components. Custom built systems Performance characterisation of stores for solar heating systems
DIN EN 15459-1 E : 2017 ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS - PART 1: CALCULATION PROCEDURES, MODULE M1-14
DIN EN 15459-1:2017-09 ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS - PART 1: CALCULATION PROCEDURES, MODULE M1-14
UNE-EN 12977-4:2012 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
DIN EN 12977-3:2016-08 (Draft) THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES
I.S. EN 15377-2:2008 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION
17/30363959 DC : 0 BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
EN 12977-4:2018 Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
PREN 12977-3 : DRAFT 2011 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES
EN 12977-3:2018 Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores
EN ISO 11855-2:2015 BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY (ISO 11855-2:2012)
BS EN 14394 : 2005 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
BS EN 12354-5:2009 Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment
ISO 11855-2:2012 Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 2: Determination of the design heating and cooling capacity
EN 15377-2:2008 Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation
EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN 15459-1:2017 Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14
EN 14336:2004 Heating systems in buildings - Installation and commissioning of water based heating systems
EN 15316-2:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5
EN 15459:2007 Energy performance of buildings - Economic evaluation procedure for energy systems in buildings
EN 15377-1:2008 Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity
EN 15450:2007 Heating systems in buildings - Design of heat pump heating systems
EN 15316-2-1:2007 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems
DIN EN 12977-4:2016-08 (Draft) THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES
DD ENV 12977-1:2001 Thermal solar systems and components. Custom built systems General requirements
BS EN 15459-1:2017 Energy performance of buildings. Economic evaluation procedure for energy systems in buildings Calculation procedures, Module M1-14
I.S. EN 15459-1:2017 ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS - PART 1: CALCULATION PROCEDURES, MODULE M1-14
BS EN 15316-2-1:2007 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies Space heating emission systems
I.S. EN 12977-3:2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES
I.S. EN 12977-1:2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
S.R. CEN TS 12977-4:2010 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES
UNI EN 12977-1 : 2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
UNE-EN ISO 11855-2:2016 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012)
UNI EN 12977-3 : 2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES
BS EN 14336:2004 Heating systems in buildings. Installation and commissioning of water based heating systems
BS EN 15459:2007 Energy performance of buildings. Economic evaluation procedure for energy systems in buildings
BS EN 15450:2007 Heating systems in buildings. Design of heat pump heating systems
UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN 15459:2008-06 ENERGY PERFORMANCE OF BUILDINGS - ECONOMIC EVALUATION PROCEDURE FOR ENERGY SYSTEMS IN BUILDINGS
CEN/TS 12977-1:2010 Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems
DIN EN 12977-1:2012-06 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
DIN EN 15377-1:2009-02 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY
DIN EN 15377-2:2008-11 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION
DIN EN 15450:2007-12 Heating systems in buildings - Design of heat pump heating systems

EN 1264-4:2009 Water based surface embedded heating and cooling systems - Part 4: Installation
EN 442-3:2003 Radiators and convectors - Part 3: Evaluation of conformity
BS EN 12170:2002 Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems requiring a trained operator
BS EN ISO 21003-2 : 2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
EN 1264-3:2009 Water based surface embedded heating and cooling systems - Part 3: Dimensioning
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN 1503-4:2016 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
EN 215 : 2004 AMD 1 2006 THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS
EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements
ISO 4126-1:2013 Safety devices for protection against excessive pressure Part 1: Safety valves
EN 12953-6:2011 Shell Boilers - Part 6: Requirements for equipment for the boiler
BS EN 12171:2002 Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems not requiring a trained operator
EN 1264-5:2008 Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output
EN 1503-3:2000/AC:2001 VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
EN 1503-2:2000 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
BS 6880-2:1988 Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment
BS EN 14336:2004 Heating systems in buildings. Installation and commissioning of water based heating systems
BS EN 60335-2-73 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
ISO 15927-5:2004 Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating
BS 7074-1:1989 Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems Code of practice for domestic heating and hot water supply
BS 6880-1:1988 Code of practice for low temperature hot water heating systems of output greater than 45 kW Fundamental and design considerations
EN 1503-1:2000 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
ISO 7726:1998 Ergonomics of the thermal environment Instruments for measuring physical quantities
EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4
BS 1566-1(2002) : 2002 COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
VDI 2035 Blatt 2:2009-08 Prevention of damage in water heating installations - Water-side corrosion
EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
BS 3198:1981 Specification for copper hot water storage combination units for domestic purposes
EN ISO 15927-5:2004/A1:2011 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927-5:2004/Amd 1:2011)
EN ISO 8044:2015 Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015)
EN ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)
ISO 8044:2015 Corrosion of metals and alloys Basic terms and definitions
ISO 12241:2008 Thermal insulation for building equipment and industrial installations Calculation rules
EN 12170:2002 Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator
EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
BS 5449:1990 Specification for forced circulation hot water central heating systems for domestic premises
EN ISO 12241:2008 Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008)
ISO 7730:2005 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS 7206:1990 Specification for unvented hot water storage units and packages
EN 1264-2:2008+A1:2012 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods
EN 442-2:2014 Radiators and convectors - Part 2: Test methods and rating
EN 1264-1:2011 Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols
BS EN 12831:2003 Heating systems in buildings. Method for calculation of the design heat load
EN 12171:2002 Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 14336:2004 Heating systems in buildings - Installation and commissioning of water based heating systems
EN 12831 : 2003 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD
BS 8558:2011 Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806
EN ISO 4126-1:2013/A1:2016 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013/AMD 1:2016)
BS 6880-3:1988 Code of practice for low temperature hot water heating systems of output greater than 45 kW Installation, commissioning and maintenance
EN 15500:2008 Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment
EN 12098-1:2017 Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more