EN 13036-4:2011
Current
Current
The latest, up-to-date edition.
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
Published date
05-10-2011
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety
5 Principle
6 Test equipment
7 Calibration
8 Additional items required for testing
9 Test Measurements
10 Field sampling
11 Test procedure
12 Calculations
13 Precision
14 Test report
Annex A (normative) - Validation and Calibration
of the pendulum friction tester
Annex B (informative) - Details of scales
Annex C (informative) - Typical test report
Bibliography
This European Standard describes a method for determining the slip/skid resistance of a surface using a device which remains stationary at the test location. The slip/skid resistance is measured by means of a slider mounted at the end of a pendulum arm.The method provides a measure of the slip/skid resistance properties of a surface either in the field or in the laboratory.This method measures the slip/skid resistance of a small area of a surface (approximately 0,01 m2). This should be considered when deciding its applicability to a surface which may have non-homogeneous surface characteristics, e.g. containing ridges or grooves, or is rough textured (exceeding 1,2 mm patch test).NOTEAs the results from this test are taken at one small location, the results cannot be compared with results from devices e.g. mobile devices, that measure the slip/skid resistance over a long length of a surface.
| Committee |
CEN/TC 227
|
| DevelopmentNote |
Supersedes PREN 13036-4. (10/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN 13036-4 : 2011 | Identical |
| DIN EN 13036-4 E : 2011 | Identical |
| UNE-EN 13036-4:2012 | Identical |
| NS EN 13036-4 : 2011 | Identical |
| I.S. EN 13036-4:2011 | Identical |
| BS EN 13036-4:2011 | Identical |
| NBN EN 13036-4 : 2011 | Identical |
| NF EN 13036-4 : 2012 | Identical |
| DIN EN 13036-4:2011-12 | Identical |
| SN EN 13036-4:2015 | Identical |
| NEN EN 13036-4 : 2011 | Identical |
| SN 640512-4 : 2015 | Identical |
| UNI EN 13036-4 : 2011 | Identical |
| 13/30262917 DC : 0 | BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| ISO 24415-2:2011 | Tips for assistive products for walking Requirements and test methods Part 2: Durability of tips for crutches |
| BS 7976-3(2002) : 2002 | PENDULUM TESTERS - PART 3: METHOD OF CALIBRATION |
| BS ISO 24415-2:2011 | Tips for assistive products for walking. Requirements and test methods Durability of tips for crutches |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 04/30055611 DC : 0 | BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| DIN EN 124-1 E : 2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| I.S. EN 15330-1:2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| CEN/TS 16786:2018 | Road restraint systems - Truck Mounted Attenuators - Performance classes, impact test acceptance criteria and test performance |
| DIN EN 14904:2006-06 | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
| 09/30183074 DC : 0 | BS ISO 24415-2 - TIPS FOR ASSISTIVE PRODUCTS FOR WALKING - REQUIREMENTS AND TEST METHODS - PART 2: DURABILITY OF TIPS FOR CRUTCHES |
| PREN 1317-5 : DRAFT 2013 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA |
| 04/19993011 DC : DRAFT JUN 2004 | BS EN 14904 - SURFACES FOR SPORTS AREAS - SPECIFICATION FOR INDOOR SURFACES FOR MULTI-SPORTS USE |
| I.S. EN 124-1:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| PREN 15330-1 : DRAFT 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| I.S. EN 1436:2018 | ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS AND TEST METHODS |
| DIN EN 14904 E : 2006 | SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| BS EN 15301-1:2007 | Surfaces for sports areas Determination of rotational resistance |
| I.S. EN 14877:2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| DIN EN 1504-3:2006-03 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| UNE-EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
| 04/19989903 DC : DRAFT JAN 2004 | BS EN 14877 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| 12/30265301 DC : 0 | BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
| 13/30262920 DC : 0 | BS EN 14877 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATIONS |
| 04/30108959 DC : DRAFT FEB 2004 | EN 1436 - ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS |
| BS 7976-2(2002) : 2002 | PENDULUM TESTERS - PART 2: METHOD OF OPERATION |
| 07/30166095 DC : 0 | EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| EN 1436:2018 | Road marking materials - Road marking performance for road users and test methods |
| PREN 1436 : DRAFT 2016 | ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS AND TEST METHODS |
| DIN EN 14877 E : 2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair |
| DIN EN 14877:2013-12 | Synthetic surfaces for outdoor sports areas - Specification |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| UNI EN 15330-1 : 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| UNI EN 14877 : 2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| PREN 14877 : DRAFT 2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATIONS |
| BS EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Definitions, classification, general principles of design, performance requirements and test methods |
| 16/30338927 DC : 0 | BS EN 1436 - ROAD MARKING MATERIALS - ROAD MARKING PERFORMANCE FOR ROAD USERS AND TEST METHODS |
| S.R. CEN/TS 16786:2018 | ROAD RESTRAINT SYSTEMS - TRUCK MOUNTED ATTENUATORS - PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST PERFORMANCE |
| DIN EN 124-1:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS EN 1436:2018 | Road marking materials. Road marking performance for road users and test methods |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 1504-3:2015-08 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
| BS EN 14904:2006 | Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| DIN EN 14904:2015-09 (Draft) | SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| UNE-EN 1436:2009+A1:2009 | Road marking materials - Road marking performance for road users |
| BS EN 15330-1:2013 | Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| EN 15330-1:2013 | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 15301-1:2007 | Surfaces for sports areas - Part 1: Determination of rotational resistance |
| EN 14904:2006 | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
| EN 14877:2013 | Synthetic surfaces for outdoor sports areas - Specification |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| 15/30324901 DC : 0 | BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| ASTM F 2772 : 2011 : REDLINE | Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems |
| DIN EN 15330-1:2013-12 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| DIN EN 15301-1:2007-06 | Surfaces for sports areas - Part 1: Determination of rotational resistance |
| BS EN 14877:2013 | Synthetic surfaces for outdoor sports areas. Specification |
| EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
| ISO 13473-1:1997 | Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
| EN 13036-1:2010 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| EN ISO 13473-1 : 2004 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.