EN 13108-4:2016/AC:2017
Current
The latest, up-to-date edition.
BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT
25-10-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions symbols and abbreviations
4 Requirements for constituent materials
5 Requirements for the mixture
6 Assessment and verification of constancy of
performance - AVCP
7 Identification
Annex A (normative) - Calculations of the penetration or
the softening point of the binder of a mixture when
reclaimed asphalt is used
Annex B (normative) - Natural asphalt
Annex C (normative) - Coated chippings for application to
Hot Rolled Asphalt surface course
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No. 305/2011
Defines requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas.
Committee |
TC 227
|
DevelopmentNote |
To be read in conjunction with EN 13108-20 and EN 13108-21. (06/2006) Supersedes PREN 13108-4. (06/2016)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN EN 13108-4 Berichtigung 1:2018-05 | Identical |
NF EN 13108-4 : 2006 | Identical |
UNE-EN 13108-4:2007 | Identical |
NBN EN 13108-4 : 2016 | Identical |
NEN EN 13108-4 : 2016 C1 2017 | Identical |
NS EN 13108-4 : 2016 AC 2017 | Identical |
I.S. EN 13108-4:2016 | Identical |
ONORM EN 13108-4 : 2016 | Identical |
PN EN 13108-4 : 2016 AC 2017 | Identical |
SN 640431-4A : 2008 | Identical |
SN EN 13108-4 : 2007 + AC 2008 | Identical |
UNI EN 13108-4 : 2006 | Identical |
ONORM EN 13108-4 : 2018 | Identical |
BS EN 13108-4:2016 | Identical |
DIN EN 13108-4:2013-06 (Draft) | Identical |
BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
PREN 12697-35 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
I.S. EN 13108-7:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
DIN EN 12697-20:2012-06 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 13108-6:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
I.S. EN 12697-35:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 13108-9:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN LAYER (AUTL) |
EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
UNE-EN 12697-35:2017 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
14/30310361 DC : 0 | BS EN 12697-35 - BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
PREN 13108-21 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
13/30278732 DC : 0 | BS EN 13108-21 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
BS EN 13108-9:2016 | Bituminous mixtures. Material specifications Asphalt for Ultra-Thin Layer (AUTL) |
BS EN 13108-7:2016 | Bituminous mixtures. Material specifications Porous Asphalt |
UNI EN 12697-20 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
BS EN 12697-20:2012 | Bituminous mixtures. Test methods for hot mix asphalt Indentation using cube or cylindrical specimens (CY) |
UNE-EN 12697-20:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY) |
BS EN 12697-35:2004 | Bituminous mixtures. Test methods for hot mix asphalt Laboratory mixing |
BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
I.S. EN 12697-20:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
BS EN 13108-8:2016 | Bituminous mixtures. Material specifications Reclaimed asphalt |
EN 12697-20:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 13108-8:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
BS EN 13108-6:2016 | Bituminous mixtures. Material specifications Mastic Asphalt |
EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
EN 12697-46 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 46: LOW TEMPERATURE CRACKING AND PROPERTIES BY UNIAXIAL TENSION TESTS |
EN 12697-8:2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
EN 12697-22:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN 12697-41:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
EN 12697-47:2010 | Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts |
EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
EN 12697-37:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA |
EN ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.