EN 13108-8:2016
Current
The latest, up-to-date edition.
Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt
15-06-2016
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Requirements for the feedstock
5 Description of the feedstock
6 Identification
Bibliography
This European Standard specifies requirements for the classification and description of reclaimed asphalt as a constituent material for asphalt mixtures. It is not a standard for compliance.This European Standard only specifies reclaimed asphalt with bituminous binders, such as: paving grade bitumen, modified bitumen or hard grade bitumen. Reclaimed asphalt contaminated with coal tar or other additives or components above hazardous levels is not covered by this Standard and will need to be considered under Member State Environmental, and Health and Safety Regulations.
Committee |
CEN/TC 227
|
DevelopmentNote |
Supersedes PREN 13108-8. (06/2016)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NEN EN 13108-8 : 2016 | Identical |
PN EN 13108-8 : 2016 | Identical |
SS-EN 13108-8:2016 | Identical |
NF EN 13108-8 : 2016 | Identical |
SN EN 13108-8 : 2005 | Identical |
UNI EN 13108-8 : 2006 | Identical |
SN EN 13108-8 : 2019 | Identical |
NBN EN 13108-8 : 2016 | Identical |
I.S. EN 13108-8:2016 | Identical |
UNE-EN 13108-8:2018 | Identical |
NS EN 13108-8 : 2005 | Identical |
BS EN 13108-8:2016 | Identical |
UNI EN 13108-8:2016 | Identical |
SN 640431-8A-NA : 2005 | Identical |
DIN EN 13108-8:2013-06 (Draft) | Identical |
UNE-EN 13108-8:2007 | Identical |
DIN EN 13108-8:2016-12 | Identical |
13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
BS EN 13108-3:2016 | Bituminous mixtures. Material specifications Soft Asphalt |
EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
I.S. EN 13108-4:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
I.S. EN 13108-7:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
I.S. EN 13108-6:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
I.S. EN 13108-3:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
PD ISO/TS 13471-1:2017 | Acoustics. Temperature influence on tyre/road noise measurement Correction for temperature when testing with the CPX method |
I.S. EN 13108-9:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN LAYER (AUTL) |
EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
EN 13108-4:2016/AC:2017 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
BS EN 13108-9:2016 | Bituminous mixtures. Material specifications Asphalt for Ultra-Thin Layer (AUTL) |
18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
BS EN 13108-7:2016 | Bituminous mixtures. Material specifications Porous Asphalt |
BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
ISO/TS 13471-1:2017 | Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method |
PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
BS EN 13108-6:2016 | Bituminous mixtures. Material specifications Mastic Asphalt |
BS EN 13108-4:2016 | Bituminous mixtures. Material specifications Hot Rolled Asphalt |
EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
EN 12697-2:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
EN 13108-4:2016/AC:2017 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
EN 12697-42:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt |
EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.