EN 13530-2:2002/AC:2006
Current
The latest, up-to-date edition.
23-08-2006
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Design
5 Fabrication
6 Inspection and testing
Annex A (informative) - Elastic stress analysis
Annex B (normative) - Additional requirements for 9% Ni steel
Annex C (normative) - Pressure strengthening of vessels from
austenitic stainless steels
Annex D (informative) - Specific weld details
Annex E (normative) - Increased material property for austenitic
stainless steel
Annex F (informative) - Outer jacket relief devices
Bibliography
Describes requirements for the design, fabrication, inspection and testing of large transportable vacuum insulated cryogenic vessels of more than 1000 l volume, which are permanently (fixed tanks) or not permanently (demountable tanks) attached to a vehicle, for carriage by road.
Committee |
CEN/TC 268
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
DIN EN 13530-2:2003-01 | Identical |
PN EN 13530-2 : 2003 AC 2006 | Identical |
NBN EN 13530-2 : 2003 COR 2006 | Identical |
NS EN 13530-2 : 2002 AC 2006 | Identical |
BS EN 13530-2:2002 | Identical |
I.S. EN 13530-2:2002 | Identical |
NEN EN 13530-2 : 2002 C1 2006 | Identical |
UNI EN 13530-2 : 2004 | Identical |
NF EN 13530-2 : 2003 AMD 1 2004 | Identical |
SN EN 13530-2 : 2003 CORR 2006 | Identical |
UNE-EN 13530-2:2003 | Identical |
UNE-EN ISO 20421-2:2017 | Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO 20421-2:2017) |
I.S. EN ISO 20421-2:2017 | CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 2: OPERATIONAL REQUIREMENTS (ISO 20421-2:2017) |
11/30253745 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
17/30362892 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
EN ISO 20421-2:2017 | Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO 20421-2:2017) |
ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
BS EN 14025 : 2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
EN 14025:2013+A1:2016 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 20421-2:2016-06 (Draft) | CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 2: OPERATIONAL REQUIREMENTS (ISO 20421-2:2017) |
ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
UNE-EN 14025:2014 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
DIN EN ISO 20421-2 E : 2017 | CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 2: OPERATIONAL REQUIREMENTS (ISO 20421-2:2017) |
BS EN ISO 20421-2:2017 | Cryogenic vessels. Large transportable vacuum-insulated vessels Operational requirements |
I.S. EN 14025:2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
EN 1252-2:2001 | Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C |
EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
EN 288-4:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURES FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
EN 1252-1:1998/AC:1998 | CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C |
EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
EN 1797:2001 | Cryogenic vessels - Gas/material compatibility |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
EN 1626:2008 | Cryogenic vessels - Valves for cryogenic service |
EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
EN 12300 : 1998 AMD 1 2006 | CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE |
EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
ISO 1106-1:1984 | Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick |
EN 875:1995 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
EN 13530-1:2002 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements |
EN 288-8 : 1995 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 8: APPROVAL BY A PRE-PRODUCTION WELDING TEST |
EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
EN 13068-3:2001 | Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays |
EN 13648-3:2002 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
EN 1435:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.