EN 13808:2013
Current
Current
The latest, up-to-date edition.
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
Published date
08-05-2013
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Requirements and test methods
6 Assessment and verification of constancy of
performance - AVCP
Annex A (informative) - Examples of abbreviated
terms for bituminous emulsions
Annex B (informative) - Examples of selected
performance classes for a C 69 BP 2 emulsion
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation 305/2011
Bibliography
This European Standard specifies the requirements for performance characteristics of cationic bituminous emulsion classes which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.This European Standard applies to emulsions of bitumen, or of fluxed bitumen, or of cut back bitumen and to emulsions of polymer modified bitumen, or of polymer modified fluxed bitumen, or of polymer modified cut-back bitumen, which also includes latex modified bituminous emulsions.Within Europe several types of cationic bituminous emulsions are used. Depending on traditional practices, different binder contents may be used for the same purpose. When designing a specification for a particular application, care should be taken to make class selections which are compatible and realistic.NOTEFor the purposes of this European Standard, the term “% (m/m)” is used to represent the mass fraction.
| Committee |
CEN/TC 336
|
| DevelopmentNote |
Supersedes PREN 13808 & EN 14733. (05/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 13808 : 2013 | Identical |
| NS EN 13808 : 2013 + NA 2016 | Identical |
| NBN EN 13808 : 2013 | Identical |
| DIN EN 13808:2013-07 | Identical |
| PN EN 13808 : 2013 | Identical |
| NF EN 13808:2013 | Identical |
| UNE-EN 13808:2013 | Identical |
| SN 670205-NA : 2015 | Identical |
| I.S. EN 13808:2013 | Identical |
| NEN EN 13808 : 2013 | Identical |
| SN EN 13808 : 2015 | Identical |
| BS EN 13808:2013 | Identical |
| UNI EN 1431 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| BS 2000-493(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| I.S. EN 12271:2006 | SURFACE DRESSING - REQUIREMENTS |
| PD CEN/TS 16346:2012 | Bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate |
| 08/30189590 DC : 0 | BS EN 13074-1 [BS 2000-493] - BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMEN BY EVAPORATION |
| UNI EN 12273 : 2008 | SLURRY SURFACING - REQUIREMENTS |
| I.S. EN 12273:2008 | SLURRY SURFACING - REQUIREMENTS |
| S.R. CEN/TS 16346:2012 | BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR AND IMMEDIATE ADHESIVITY OF CATIONIC BITUMINOUS EMULSIONS WITH 2/4 MM AGGREGATE |
| NF EN 13074-1 : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| BS EN 14733 : 2005 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| EN 12273:2008 | Slurry surfacing - Requirements |
| EN 12271:2006 | Surface dressing - Requirements |
| 09/30210257 DC : 0 | BS EN 13614 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| UNI EN 13614 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| 18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 13614:2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| DIN EN 13074-1:2011-05 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| BS EN 13074-1:2011 | Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Recovery by evaporation |
| BS 2000-521(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| UNI EN 13074-1 : 2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| UNI CEN/TS 16346 : 2013 | BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR AND IMMEDIATE ADHESIVITY OF CATIONIC BITUMINOUS EMULSIONS WITH 2/4 MM AGGREGATE |
| DIN EN 12271:2007-03 | Surface dressing - Requirements |
| BS EN 12271:2006 | Surface dressing. Requirements |
| UNE-EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| UNE-EN 14733:2006 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| UNI EN 14733 : 2010 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| 16/30334728 DC : 0 | BS EN 1431 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| 06/30149762 DC : 0 | EN 12273 - SLURRY SURFACING - SPECIFICATIONS |
| BS EN 12273:2008 | Slurry surfacing. Requirements |
| EN 13074-1:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
| NF EN 13614 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| BS EN 13075-1:2016 | Bitumen and bituminous binders. Determination of breaking behaviour Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| BS EN 13614:2004 | Methods of test for petroleum and its products. BS 2000-521: Bitumen and bituminous binders. Determination of adhesivity of bitumen emulsions by water immersion test. Aggregate method |
| DIN EN 1431:2016-03 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| DIN EN 12273:2008-08 | Slurry surfacing - Requirements |
| PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| IP 458 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| 17/30362725 DC : 0 | BS EN 13074-1 - BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| UNE-EN 13074-1:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
| PREN 13614 : DRAFT 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| I.S. EN 13074-1:2011 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| DIN EN 13614:2011-06 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| CEN/TS 16346:2012 | Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| DIN EN 14733:2010-12 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 13074-1:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 13589:2008 | Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 13587:2016 | Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| BS EN ISO 9001:2015 | Quality management systems. Requirements |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| BS EN 14733 : 2005 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| EN 12846-1:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 13703:2003 | Bitumen and bituminous binders - Determination of deformation energy |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN 12597:2014 (edition 2) | Bitumen and bituminous binders - Terminology |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN 16345:2012 | Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| EN 13588:2017 | Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
| EN 12849:2009 | Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions |
| EN 12846-2:2011 | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders |
| EN 12594:2014 (edition 2) | Bitumen and bituminous binders - Preparation of test samples |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12850:2009 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 12593:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE FRAASS BREAKING POINT |
| EN 13074-2:2011 | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 13924:2006/AC:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| EN 1430:2009 | Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions |
| EN ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
| EN 12848:2009 | Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions |
| EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| BS 434-1(2011) : 2011 | BITUMEN ROAD EMULSIONS - PART 1: SPECIFICATION FOR ANIONIC BITUMEN ROAD EMULSIONS |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.