Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 13915:2017

Current
Current

The latest, up-to-date edition.

Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
Published date

05-07-2017

European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Assessment and verification of constancy
  of performance - AVCP
7 Designation of the prefabricated gypsum
  plasterboard panels
8 Marking, labelling and packaging
Annex A (informative) - Sampling procedure for
        testing
Annex B (normative) - Mounting and fixing in the
        test according to EN 13823 (SBI test)
Annex ZA (informative) - Relationship of this
         European Standard with Regulation (EU)
         No.305/2011
Bibliography

This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings.This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods.This Standard covers only prefabricated panels installed so that the core is not exposed.The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions.This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry.It provides the assessment and verification of constancy of performance of the products.

DevelopmentNote
Supersedes PREN 13915. (07/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
DIN EN 13915:2017-09 Identical
UNI EN 13915:2017 Identical
UNI EN 13915 : 2007 Identical
I.S. EN 13915:2017 Identical
NF EN 13915 : 2017 Identical
BS EN 13915:2017 Identical
NBN EN 13915 : 2007 Identical
SN EN 13915 : 2017 Identical
DIN EN 13915:2016-02 (Draft) Identical
PN EN 13915 : 2017 Identical
UNE-EN 13915:2018 Identical
NEN EN 13915 : 2017 Identical
UNE-EN 13915:2009 Identical
NS EN 13915 : 2017 Identical

11/30251988 DC : 0 BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
11/30251994 DC : 0 BS EN 13963 - JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 13963 : DRAFT 2011 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 14353 : DRAFT 2016 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14353 E : 2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14353 : 2007 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14190:2014 Gypsum board products from reprocessing. Definitions, requirements and test methods
BS EN 14566 : 2008 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14353:2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14566:2009-10 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13963:2014 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14566:2008 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14190:2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 14190 : DRAFT 2011 GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
DIN EN 14566 E : 2009 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13963:2014-09 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 14566 : 2009 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 14190 : 2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13963 : 2014 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14353:2016-02 (Draft) METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 14566 : DRAFT 2014 MECHANICAL FASTENERS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TESTS METHODS
DIN EN 14190:2014-09 Gypsum board products from reprocessing - Definitions, requirements and test methods
BS EN 13963:2014 Jointing materials for gypsum boards. Definitions, requirements and test methods
UNE-EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test methods
UNE-EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test methods
EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
16/30332914 DC : 0 BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14353:2017-09 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS

EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
ISO 10140-2:2010 Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
ISO 12572:2016 Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method
EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
EN ISO 10140-2:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010)
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
ISO 9001:2015 Quality management systems — Requirements
ISO 717-1:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
ISO 7892:1988 Vertical building elements — Impact resistance tests — Impact bodies and general test procedures
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test methods

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more