Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 14017:2005+A2:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Agricultural and forestry machinery - Solid fertilizer distributors - Safety
Superseded date

01-05-2018

Published date

01-07-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
  5.1 General
  5.2 Stability when parked and for manual handling
       5.2.1 General
       5.2.2 Mounted machines fitted with rollers for manual
              handling when dismounted
       5.2.3 Machines with adjustable supporting devices
  5.3 Distributing components
       5.3.1 Swivelling and movable components
       5.3.2 Spreading plates and oscillating tubes
  5.4 Feeding components guarding
  5.5 Loading
       5.5.1 Safe access for loading
       5.5.2 Boarding means to loading location
  5.6 Checking of the hopper contents
  5.7 Protection against ejection of fertilizer
  5.8 Removal of the spreading device
  5.9 Flow rate calibration system
  5.10 Hitching and clearance zone
  5.11 Noise
       5.11.1 Noise reduction as a safety requirement
       5.11.2 Verification of requirements on noise based on
              noise emission values
6 Verification of the safety requirements and/or protective
  measures
  6.1 Stability when parked and for manual handling
       6.1.1 General
       6.1.2 Mounted machines fitted with rollers for manual
              handling when dismounted
  6.2 Swivelling and movable components
7 Information for use
  7.1 Instruction handbook
  7.2 Marking
Annex A (informative) - Stability of the tractor distributor
                        combination
Annex B (informative) - Examples of pictograms
Annex ZA (informative) - Relationship between this European
                         Standard and the Essential
                         Requirements of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
                         Standard and the Essential
                         Requirements of EU Directive
                         2006/42/EC
Bibliography

This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard.It does not apply to:-combined seed and fertilizer drills;-machines for distributing granulated pesticides;-pedestrian controlled distributors;-knapsack distributors.This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from:-inadequate lighting of moving/working area;-inadequate visibility from drivers/operators position;-inadequate seating;-travelling functions (drive, braking etc.);-rolling over;-equipment for loading fertilizer into the machine;-an auxiliary engine.It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003.

DevelopmentNote
2005 Edition Re-Issued in July 2009 & incorporates AMD 2 2009. (07/2009)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

I.S. EN 13739-1:2011 AGRICULTURAL MACHINERY - SOLID FERTILIZER BROADCASTERS AND FULL WIDTH DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 1: REQUIREMENTS
UNI EN 13739-1 : 2011 AGRICULTURAL MACHINERY - SOLID FERTILIZER BROADCASTERS AND FULL WIDTH DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 1: REQUIREMENTS
DIN EN 13739-1:2012-05 Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements
UNE-EN 13739-1:2012 Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements
EN 13739-1:2011 Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements
BS EN 13739-1:2011 Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection Requirements

EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 13739-2:2011/AC:2012 AGRICULTURAL MACHINERY - SOLID FERTILIZER BROADCASTERS AND FULL WIDTH DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 2: TEST METHODS
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN 13740-2:2003 Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 2: Test methods
EN 13740-1:2003 Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 1: Requirements
EN 13739-1:2011 Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 1553 : 1999 AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more