Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 14307:2015

Current
Current

The latest, up-to-date edition.

THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
Published date

09-12-2015

European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy of
  Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Factory production control
Annex B (normative) - Determination of the aged values
        of thermal conductivity
Annex C (informative) - Additional properties
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Regulation
Bibliography

This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 180 °C to + 75 °C.

Committee
TC 88
DevelopmentNote
Supersedes PREN 14307. (01/2016)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
SN EN 14307 : 2015 Identical
UNE-EN 14307:2017 Identical
DIN EN 14307 E : 2016 Identical
NF EN 14307 : 2016 Identical
NS EN 14307 : 2015 Identical
BS EN 14307:2015 Identical
UNI EN 14307 : 2013 Identical
NBN EN 14307 : 2016 Identical
PN EN 14307 : 2016 Identical
UNI EN 14307:2016 Identical
NEN EN 14307 : 2016 Identical
DIN EN 14307:2016-03 Identical
SS-EN 14307:2015 Identical
I.S. EN 14307:2015 Identical

10/30213965 DC : 0 BS EN 13164 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
07/30167661 DC : DRAFT AUG 2007 BS EN 15715 - THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
UNE-EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
BS EN 13164 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
BS EN 16783:2017 Thermal insulation products. Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
PREN 13164 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
UNI EN 15715 : 2009 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
DIN EN 13164:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
I.S. EN 13164:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION
VDI 2055 Blatt 2:2013-10 Thermal insulation of heated and refrigerated operational installations in the industry and in the building services - Technical basics for the verification of properties of insulating materials
14/30301580 DC : 0 BS EN/TC 16783 - THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS
DIN EN 15715:2010-04 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
I.S. EN 16783:2017 THERMAL INSULATION PRODUCTS - PRODUCT CATEGORY RULES (PCR) FOR FACTORY MADE AND IN-SITU FORMED PRODUCTS FOR PREPARING ENVIRONMENTAL PRODUCT DECLARATIONS
I.S. EN 15715:2009 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
UNE-EN 15715:2012 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
UNE-EN 13164:2013 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
BS EN 15715:2009 Thermal insulation products. Instructions for mounting and fixing for reaction to fire testing. Factory made products
DIN EN 15715 E : 2010 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS

ISO 9229:2007 Thermal insulation Vocabulary
EN ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
ISO 13787:2003 Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity
EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
EN 13468:2001 Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
EN 13820:2003 Thermal insulating materials for building applications - Determination of organic content
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
ISO 2477:2005 Shaped insulating refractory products Determination of permanent change in dimensions on heating
EN 13471:2001 Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
EN ISO 8497:1996 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994)
ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
EN ISO 9229:2007 Thermal insulation - Vocabulary (ISO 9229:2007)
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
EN 13469:2012 Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
ISO 4590:2016 Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells
EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
ISO 8497:1994 Thermal insulation — Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
EN ISO 13787:2003 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003)
EN 13470:2001 Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 1602:2013 Thermal insulating products for building applications - Determination of the apparent density
EN 12087:2013 Thermal insulating products for building applications - Determination of long term water absorption by immersion
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
ISO 8894-1:2010 Refractory materials Determination of thermal conductivity Part 1: Hot-wire methods (cross-array and resistance thermometer)
EN 13472:2012 Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 1094-6:1998 Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987 modified)
EN 13639:2017 Determination of total organic carbon in limestone
EN 12091:2013 Thermal insulating products for building applications - Determination of freeze-thaw resistance
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
EN 1609:2013 Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
EN 12086:2013 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 822:2013 Thermal insulating products for building applications - Determination of length and width

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more