Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 14389-1:2015

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
Withdrawn date

30-11-2015

Published date

06-05-2015

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Report
Annex A (normative) - Road side exposure - Classification of
        environmental conditions
Annex B (informative) - Material standards
Bibliography

This European Standard specifies requirements for assessing the working life and provides the relevant exposure conditions.Standards of construction and any material tests conducted should provide evidence of resistance to specified conditions selected from the following:I.Chemical AgentsLocation dependentII.De-icing saltLocation/climate dependentIII.Dirty water/dustLocation/climate dependentIV.DewClimate dependentV.Freeze/thawClimate dependentVI.ColdClimate dependentVII.HeatClimate dependentVIII.UV RadiationClimate dependentIX.Traffic VibrationLocation dependentX.Biological ProcessClimate dependentXI.OzoneLocation dependentXII.WaterClimate dependentXIII.Water spray (Wet/dry)Location dependentNOTESpecial care has to be taken for combinations of different materials, whether inside a single device or in combination with other devices (for example: a combination of different acoustic elements or another combination of acoustic and structural elements).

Committee
CEN/TC 226
DevelopmentNote
Supersedes PREN 14389-1. To be read in conjunction with EN 1793-1, -2, -6, CEN/TS 1793-5, EN 1794-1, -2, -3, EN 14389-2 and EN 60721-3-4. (05/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn
Supersedes

PREN 14388 : DRAFT 2017 ROAD TRAFFIC NOISE REDUCING DEVICES - SPECIFICATIONS
BS EN 1793-5:2016 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions
15/30326160 DC : 0 BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
DIN EN 14389-2:2015-07 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
I.S. EN 1793-5:2016 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
10/30218982 DC : DRAFT JUNE 2010 BS EN 14388 - ROAD TRAFFIC NOISE REDUCING DEVICES - SPECIFICATIONS
PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
DIN EN 14388:2015-12 ROAD TRAFFIC NOISE REDUCING DEVICES - SPECIFICATIONS
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 14388:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - SPECIFICATIONS
14/30296484 DC : 0 BS EN 1793-5 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
I.S. EN 1794-3:2016 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION
EN 1793-5:2016 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
14/30298590 DC : 0 BS EN 14388 - ROAD TRAFFIC NOISE REDUCING DEVICES - SPECIFICATIONS
13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
PREN 1794-3 : DRAFT 2014 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION
UNE-EN 1793-5:2016 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 14388:2016 Road traffic noise reducing devices - Specifications
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
EN 1794-3:2016 Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification
EN 14388:2015 Road traffic noise reducing devices - Specifications
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
UNE-EN 1794-3:2016 Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification
BS EN 1794-3:2016 Road traffic noise reducing devices. Non-acoustic performance Reaction to fire. Burning behaviour of noise reducing devices and classification
17/30361208 DC BS EN 14388. Road traffic noise reducing devices. Specifications
14/30295274 DC : 0 BS EN 1794-3 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
DIN EN 14388 E : 2015 ROAD TRAFFIC NOISE REDUCING DEVICES - SPECIFICATIONS
BS EN 14388:2015 Road traffic noise reducing devices. Specifications

ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
ISO 898-7:1992 Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
EN 771-3:2011+A1:2015 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 1991-1-6:2005/AC:2013 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 4628-1:2016 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016)
EN 335:2013 Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products
EN 351-1:2007 Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
ISO 11403-3:2014 Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties
EN 1991-1-7:2006/A1:2014 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1991-1-3:2003/A1:2015 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
ISO 8256:2004 Plastics — Determination of tensile-impact strength
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN 14388:2015 Road traffic noise reducing devices - Specifications
ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
EN ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
EN 350-2:1994 Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1991-1-2:2002/AC:2013 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
ISO 4628-4:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
ISO 4628-3:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1991-1-5:2003/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS
EN 1993-1-4:2006/A1:2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 20898-7 : 1995 MECHANICAL PROPERTIES OF FASTENERS - PART 7: TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM (ISO 898-7:1992)
ISO 4628-5:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
ISO 4628-1:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system
EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
EN 599-1:2009+A1:2013 Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class
EN ISO 4628-6:2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011)
ISO 14713:1999 Protection against corrosion of iron and steel in structures Zinc and aluminium coatings Guidelines
EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
EN 1991-1-1:2002/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1793-6:2012 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
EN 1793-1:2017 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
ISO 12543-4:2011 Glass in building Laminated glass and laminated safety glass Part 4: Test methods for durability
EN 460:1994 Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
EN ISO 12543-4:2011 Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011)
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
EN 1993-1-3:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
EN 1996-1-2:2005/AC:2010 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 771-1:2011+A1:2015 Specification for masonry units - Part 1: Clay masonry units
EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
EN 1999-1-2:2007/AC:2009 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
EN ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
EN 60721-3-4:1995/A1:1997 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 4: STATIONARY USE AT NON-WEATHER-PROTECTED LOCATIONS
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
ISO 4628-2:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
EN 1793-2:2012 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more