Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1489:2000

Current
Current

The latest, up-to-date edition.

Building valves - Pressure safety valves - Tests and requirements
Published date

22-03-2000

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Materials and surface finishes
5 Design and dimensional requirements
6 Hydraulic tests and requirements
7 Mechanical tests and requirements
8 Acoustic tests and requirements
9 Classification
10 Designation
11 Marking
Annex A (informative)

This European Standard specifies, dimensions, materials and performance requirements (including methods of test) for pressure safety valves, of nominal sizes from DN 15 to DN 40, having working pressures from 0,1 MPa (1 bar) to 1,0 MPa (10 bar). Pressure safety valves are intended for fitting to the cold water supply of storage water heaters, having a maximum distribution temperature of 95°C, for all energy sources. Pressure safety valves do not control the temperature and alone do not constitute the protection required for storage waters heaters.

Committee
CEN/TC 164
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
NS EN 1489 : 1ED 2000 Identical
NBN EN 1489 : 2000 Identical
PN EN 1489 : 2003 Identical
I.S. EN 1489:2000 Identical
UNI EN 1489 : 2002 Identical
DIN EN 1489:2000-06 Identical
NEN EN 1489 : 2000 Identical
SN EN 1489 : 2000 Identical
UNE-EN 1489:2001 Identical
NF EN 1489 : 2000 Identical
BS EN 1489:2000 Identical

14/30287372 DC : 0 BS EN 12897 - WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
NF EN 806-5 : 2012 SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
PREN 12897 : DRAFT 2014 WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
UNI EN 12977-1 : 2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
S.R. CEN TS 12977-1:2010 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
DIN EN 12976-1:2017-04 Thermal solar systems and components - Factory made systems - Part 1: General requirements
BS EN 806-5:2012 Specifications for installations inside buildings conveying water for human consumption Operation and maintenance
DD CEN/TS 12977-1:2010 Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems
PREN 12976-1 : DRAFT 2014 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 12977-1:2012 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
BS EN 1490:2000 Building valves. Combined temperature and pressure relief valves. Tests and requirements
I.S. EN 12976-1:2017 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
12/30257354 DC : 0 BS EN 12976-1 - THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
07/19990369 DC : 0 BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION
UNI CEN/TS 12977-1 : 2010 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
BS EN 12976-2:2017 Thermal solar systems and components. Factory made systems Test methods
I.S. EN 12976-2:2017 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 2: TEST METHODS
EN 12977-1:2018 Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems
EN 12976-2:2017 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 2: TEST METHODS
DIN EN 12976-1:2014-07 (Draft) THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN 12976-1:2017 Thermal solar systems and components - Factory made systems - Part 1: General requirements
DIN EN 12977-1:2016-08 (Draft) THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS
DIN EN 806-5:2012-04 Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance
09/30200073 DC : 0 BS EN 806-5 - SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
BS EN 12977-1:2012 Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems
EN 12897:2016 Water supply - Specification for indirectly heated unvented (closed) storage water heaters
BS EN 12976-1:2017 Thermal solar systems and components. Factory made systems General requirements
BS EN 806-2:2005 Specifications for installations inside buildings conveying water for human consumption Design
BS EN 12897:2016 Water supply. Specification for indirectly heated unvented (closed) storage water heaters
EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 806-5:2012 Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance
04/30113768 DC : DRAFT MAY 2004 EN 12976-1 - THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
14/30298615 DC : 0 BS EN 12976-1 - THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNI EN 806-5 : 2012 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
I.S. EN 806-5:2012 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 5: OPERATION AND MAINTENANCE
UNI EN 806-2 : 2008 SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN
UNE-EN 806-5:2013 Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance
I.S. EN 12897:2016 WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
DIN EN 806-2:2005-06 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
UNE-EN 12897:2017 Water supply - Specification for indirectly heated unvented (closed) storage water heaters
BS EN 1491:2000 Building valves. Expansion valves. Tests and requirements
CEN/TS 12977-1:2010 Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems
DIN EN 12977-1:2012-06 THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS

EN 1254-2:1998 Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 12420:2014 Copper and copper alloys - Forgings
EN ISO 6509 : 1995 CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS
EN 1982:2017 Copper and copper alloys - Ingots and castings
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more