Name: EN 14904:2006
Brand: CEN

Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification

Published date

12-04-2006

Publisher

Comite Europeen de Normalisation

1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for safety in use
   4.1 General
   4.2 Friction
   4.3 Shock absorption
   4.4 Vertical deformation
5 Technical requirements
   5.1 Vertical ball behaviour
   5.2 Resistance to a rolling load
   5.3 Resistance to wear
   5.4 Reaction to fire
   5.5 Formaldehyde emission
   5.6 Content of pentachlorophenol (PCP)
   5.7 Specular reflectance
   5.8 Specular gloss
   5.9 Resistance to indentation
   5.10 Resistance to impact
   5.11 Degree of evenness
6 Evaluation of conformity
   6.1 General
   6.2 Type testing
   6.3 Factory production control (FPC)
7 Marking and labelling
Annex A (informative) - Resistance to repeated impact of
                        synthetic sports floors
Annex B (informative) - Shock absorption and vertical
                        deformation types for elastic
                        sports floors
Annex C (normative) - Analysis of pentachlorophenol in
                        sports floor covering
      C.1 General
      C.2 Reagents
      C.3 Apparatus
      C.4 Sampling and specimen preparation
      C.5 Sample extraction and analysis
      C.6 Expression of results
Annex D (normative) - Factory production control
      D.1 General
      D.2 Control of raw material
      D.3 Process control
      D.4 Calibration plan
      D.5 Testing of finished products
      D.6 Inspection and testing status of products
      D.7 Traceability
Annex ZA (informative) - Clauses of this European Standard
                       addressing provisions of the EU
                       Construction Products Directive

This European Standard specifies requirements for surfaces for indoor facilities for multi-sports use. It also covers surface systems which include both their supporting and upper layers whether prefabricated, produced in situ or a combination of the two. It also provides for the evaluation of conformity of products to the requirements of this European Standard. This European Standard is not applicable to indoor tennis halls.NOTE"Multi-sports" will be defined by appropriate national provisions.

Committee	CEN/TC 217
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Current

Standards	Relationship
BS EN 14904:2006	Identical
DIN EN 14904 E : 2006	Identical
NS EN 14904 : 1ED 2006	Identical
DIN EN 14904:2015-09 (Draft)	Identical
NF EN 14904 : 2006	Identical
I.S. EN 14904:2006	Identical
PN EN 14904 : 2009	Identical
UNE-EN 14904:2007	Identical
NEN EN 14904 : 2006	Identical
UNI EN 14904 : 2006	Identical
NBN EN 14904 : NOV 2006	Identical
SN EN 14904 : 2006	Identical
UNE-EN 14904:2006	Identical
DIN EN 14904:2006-06	Identical

93/68/EEC : 1993 AMD 2 1998	COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN 717-2:1994/AC:2002	WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
EN 12235:2013	Surfaces for sports areas - Determination of vertical ball behaviour
EN 1569 : 1999	SURFACES FOR SPORTS AREAS - DETERMINATION OF THE BEHAVIOUR UNDER A ROLLING LOAD
EN ISO 5470-1:2016	Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
ISO 1957:2000	Machine-made textile floor coverings Selection and cutting of specimens for physical tests
EN 14808:2005	Surfaces for sports areas - Determination of shock absorption
89/106/EEC : 1988	COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
ISO 5470:1980	Rubber or plastics coated fabrics Determination of abrasion resistance
EN 517:2006	Prefabricated accessories for roofing - Roof safety hooks
EN 12673 : 1998	WATER QUALITY - GAS CHROMATOGRAPHIC DETERMINATION OF SOME SELECTED CHLOROPHENOLS IN WATER
EN 717-1:2004	Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
EN 13036-4:2011	Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
EN 13745 : 2004	SURFACES FOR SPORTS AREAS - DETERMINATION OF SPECULAR REFLECTANCE
EN 13238:2010	Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
EN 14809:2005/AC:2007	SURFACES FOR SPORTS AREAS - DETERMINATION OF VERTICAL DEFORMATION
CEN/TS 15122 : 2005	SURFACES FOR SPORTS AREAS - DETERMINATION OF RESISTANCE OF SYNTHETIC SPORTS SURFACES TO REPEATED IMPACT
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
ISO 9001:2015	Quality management systems — Requirements
EN 516:2006	Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
EN 13036-7:2003	Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test
ISO 11379:2009	Textile floor coverings Laboratory cleaning procedure using spray extraction
ISO 2813:2014	Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
EN ISO 2813:2014	Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)