EN 15002:2015
Current
Current
The latest, up-to-date edition.
Characterization of waste - Preparation of test portions from the laboratory sample
Published date
22-04-2015
Publisher
Foreword
Introduction
1 Scope
2 Terms and definitions
3 Equipment
4 Interferences and sources of error
5 Procedure
6 Report
Annex A (normative) - Guideline for choosing
sample treatment techniques
Annex B (informative) - Relationship between
minimum amount of (sub-)sample and particle
size
Annex C (informative) - Sample treatment equipment
Annex D (informative) - Examples for analytical
methods
Annex E (informative) - Examples for preparation of
test samples
Bibliography
This European Standard is applicable for the preparation of representative test portions from the laboratory sample that has been taken according to the sampling plan (EN 14899), prior to physical and/or chemical analysis (e.g. preparation of eluates, extractions, digestion and/or analytical determinations) of solid (including monolithic material) and liquid samples and sludge. It is also applicable for the preparation of test portions from digests and eluates for the subsequent analyses.This European Standard is intended to find the correct sequence of operations and treatments to be applied to the laboratory sample in order to obtain suitable test portions in compliance with the specific requirements defined in the corresponding analytical procedures.
| Committee |
CEN/TC 444
|
| DevelopmentNote |
Supersedes PREN 15002. (04/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 15002:2015 | Identical |
| UNE-EN 15002:2015 | Identical |
| NF EN 15002 : 2015 | Identical |
| NBN EN 15002 : 2015 | Identical |
| PN EN 15002 : 2015 | Identical |
| I.S. EN 15002:2015 | Identical |
| SN EN 15002:2015 | Identical |
| UNI EN 15002 : 2006 | Identical |
| BS EN 15002:2015 | Identical |
| NS EN 15002 : 2006 | Identical |
| DIN EN 15002:2015-07 | Identical |
| NEN EN 15002 : 2015 | Identical |
| DIN EN 15002 E : 2015 | Identical |
| BS EN 14997:2015 | Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control |
| DIN EN 14405:2017-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| BS EN 15309:2007 | Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence |
| 14/30304804 DC : 0 | BS EN 14405 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| 13/30272291 DC : 0 | BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
| UNE-EN 14429:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition |
| BS EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
| I.S. EN 15413:2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE |
| I.S. EN 14405:2017 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| DIN EN 16424:2015-03 | CHARACTERIZATION OF WASTE - SCREENING METHODS FOR THE ELEMENT COMPOSITION BY PORTABLE X-RAY FLUORESCENCE INSTRUMENTS |
| 10/30213006 DC : 0 | BS EN 15413 - SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE |
| BS EN 15308:2016 | Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
| 09/30202015 DC : 0 | BS EN 15443 - SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE LABORATORY SAMPLE |
| DIN EN 15527:2008-09 | Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) |
| BS ISO 18227:2014 | Soil quality. Determination of elemental composition by X-ray fluorescence |
| PD CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. General |
| 08/30185788 DC : DRAFT OCT 2008 | BS EN 15864 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH CONTINUOUS LEACHANT RENEWAL UNDER CONDITIONS RELEVANT FOR SPECIFIED SCENARIO(S) |
| DD CEN/TS 14997:2006 | Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with continuous pH-control |
| EN 15192:2006 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| I.S. EN ISO 12782-4:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 4: EXTRACTION OF HUMIC SUBSTANCES FROM SOLID SAMPLES (ISO 12782-4:2012) |
| DIN EN 15936 E : 2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
| I.S. EN 16424:2014&LC:2014 | CHARACTERIZATION OF WASTE - SCREENING METHODS FOR THE ELEMENT COMPOSITION BY PORTABLE X-RAY FLUORESCENCE INSTRUMENTS |
| S.R. CLC/TS 50625-3-2:2016 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-2: TECHNICAL SPECIFICATION FOR DE-POLLUTION - LAMPS |
| I.S. EN 15936:2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
| S.R. CEN/TS 16675:2014 | CHARACTERISATION OF WASTE - TEST METHODS FOR THE DETERMINATION OF THE MONOLITHIC STATUS OF WASTE |
| DIN EN 15863:2015-06 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
| UNE-EN 16123:2013 | Characterization of waste - Guidance on selection and application of screening methods |
| DIN EN 15192:2007-02 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| CEN/TS 15862:2012 | Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
| CEN/TS 15413:2006 | Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample |
| CEN/TS 16384:2012 | Synthetic sport systems - Leaching test |
| EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
| CEN/TS 16637-3:2016 | Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test |
| EN 15413:2011 | Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample |
| CEN/TS 16023:2013 | Characterization of waste - Determination of gross calorific value and calculation of net calorific value |
| EN 15875:2011/AC:2012 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
| EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| DIN EN 15936:2012-11 | Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion |
| DIN EN 16424 E : 2015 | CHARACTERIZATION OF WASTE - SCREENING METHODS FOR THE ELEMENT COMPOSITION BY PORTABLE X-RAY FLUORESCENCE INSTRUMENTS |
| BS EN 15934:2012 | Sludge, treated biowaste, soil and waste. Calculation of dry matter fraction after determination of dry residue or water content |
| I.S. EN 14582:2016 | CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| DIN EN 14997:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| DIN EN 15169:2007-05 | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| DIN EN 15309 E : 2007 | CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
| PD CLC/TS 50625-3-4:2017 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. Temperature exchange equipment |
| 10/30233988 DC : 0 | BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| BS EN ISO 12782-1:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of amorphous iron oxides and hydroxides with ascorbic acid |
| CLC/TS 50625-3-5:2017 | Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - Photovoltaic panels |
| DIN EN 14405 E : 2017 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| BS EN 16424:2014 | Characterization of waste. Screening methods for the element composition by portable X-ray fluorescence instruments |
| PREN 14429 : DRAFT 2013 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
| CLC/TS 50625-3-3 : 2017 | Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays |
| DD CEN/TS 15413:2006 | Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample |
| DIN EN ISO 12782-3:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO 12782-3:2012) |
| DIN EN 15357 E : 2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI EN 16169 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
| I.S. EN ISO 12782-1:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 1: EXTRACTION OF AMORPHOUS IRON OXIDES AND HYDROXIDES WITH ASCORBIC ACID (ISO 12782-1:2012) |
| UNE-EN 16424:2015 | Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments |
| UNI EN ISO 12782-1 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 1: EXTRACTION OF AMORPHOUS IRON OXIDES AND HYDROXIDES WITH ASCORBIC ACID |
| UNE-EN 16377:2014 | Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste |
| I.S. EN 16169:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
| I.S. EN ISO 12782-2:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 2: EXTRACTION OF CRYSTALLINE IRON OXIDES AND HYDROXIDES WITH DITHIONITE (ISO 12782-2:2012) |
| I.S. EN 15169:2007 | CHARACTERIZATION OF WASTE - DETERMINATION OF LOSS ON IGNITION IN WASTE, SLUDGE AND SEDIMENTS |
| I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| I.S. EN 14997:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| ISO 15192:2010 | Soil quality Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| EN 15169:2007 | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| PREN 14405 : DRAFT 2014 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| UNI EN 15443 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE LABORATORY SAMPLE |
| UNI EN 15527 : 2008 | CHARACTERIZATION OF WASTE - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN WASTE USING GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC/MS) |
| CLC/TS 50625-3-2:2016 | Collection, logistics & Treatment requirements for WEEE - Part 3-2: Technical specification for de-pollution - Lamps |
| UNE-EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
| I.S. EN 16123:2013 | CHARACTERIZATION OF WASTE - GUIDANCE ON SELECTION AND APPLICATION OF SCREENING METHODS |
| UNI EN 16123 : 2013 | CHARACTERIZATION OF WASTE - GUIDANCE ON SELECTION AND APPLICATION OF SCREENING METHODS |
| DIN EN 15863 E : 2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
| 17/30348303 DC : 0 | BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
| UNE-EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| ISO 12782-2:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite |
| 10/30232771 DC : 0 | PD CEN/TR 16130 - CHARACTERISATION OF WASTE - ON-SITE VERIFICATION |
| EN 15308:2016 | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
| S.R. CEN/TS 15863:2012 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERISATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
| S.R. CEN/TR 16130:2011 | CHARACTERIZATION OF WASTE - ON-SITE VERIFICATION |
| I.S. EN 14346:2006 | CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| S.R. CEN/TS 15862:2012 | CHARACTERISATION OF WASTE - COMPLIANCE LEACHING TEST - ONE STAGE BATCH LEACHING TEST FOR MONOLITHS AT FIXED LIQUID TO SURFACE AREA RATIO (L/A) FOR TEST PORTIONS WITH FIXED MINIMUM DIMENSIONS |
| UNE-EN 15308:2017 | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
| DIN EN 16377 E : 2013 | CHARACTERIZATION OF WASTE - DETERMINATION OF BROMINATED FLAME RETARDANTS (BFR) IN SOLID WASTE |
| S.R. CLC/TS 50625-3-4:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-4: SPECIFICATION FOR DE-POLLUTION - TEMPERATURE EXCHANGE EQUIPMENT |
| DIN EN 15875 E : 2012 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
| DIN EN ISO 12782-4:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) |
| S.R. CLC/TS 50625-3-5:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-5: TECHNICAL SPECIFICATION FOR DE-POLLUTION - PHOTOVOLTAIC PANELS |
| BS EN ISO 12782-3:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid |
| BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
| BS EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography |
| BS EN 15875:2011 | Characterisation of waste. Static test for determination of acid potential and neutralisation potential of sulfidic waste |
| DIN EN 15357:2011-05 | Solid recovered fuels - Terminology, definitions and descriptions |
| S.R. CEN/TS 16637-3:2016 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PART 3: HORIZONTAL UP-FLOW PERCOLATION TEST |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| BS EN 16377:2013 | Characterization of waste. Determination of brominated flame retardants (BFR) in solid waste |
| UNI EN 15413 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE |
| UNI EN 15936 : 2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
| PD CLC/TS 50625-3-5:2017 | Collection, logistics & Treatment requirements for WEEE Technical specification for de-pollution. Photovoltaic panels |
| 09/30210254 DC : DRAFT DEC 2009 | BS EN 16023 - CHARACTERIZATION OF WASTE - DETERMINATION OF CALORIFIC VALUE |
| DIN EN 15169 E : 2007 | CHARACTERIZATION OF WASTE - DETERMINATION OF LOSS ON IGNITION IN WASTE, SLUDGE AND SEDIMENTS |
| DIN EN 15309:2007-08 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| PD CEN/TR 17105:2017 | Construction products. Assessment of release of dangerous substances. Guidance on the use of ecotoxicity tests applied to construction products |
| DIN EN 16123:2013-05 | Characterization of waste - Guidance on selection and application of screening methods |
| BS EN 16123:2013 | Characterization of waste. Guidance on selection and application of screening methods |
| DIN EN 15443:2011-05 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| I.S. EN 15443:2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE LABORATORY SAMPLE |
| PD CLC/TS 50574-2:2014 | Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons Specification for de-pollution |
| UNE-EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
| PD CLC/TS 50625-3-3:2017 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. WEEE containing CRTs and flat panel displays |
| DD CEN/TS 15443:2006 | Solid recovered fuels. Methods for laboratory sample preparation |
| PREN 15308 : DRAFT 2015 | CHARACTERIZATION OF WASTE - DETERMINATION OF SELECTED POLYCHLORINATED BIPHENYLS (PCB) IN SOLID WASTE BY GAS CHROMATOGRAPHY WITH ELECTRON CAPTURE OR MASS SPECTROMETRIC DETECTION |
| UNI EN ISO 12782-3 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 3: EXTRACTION OF ALUMINIUM OXIDES AND HYDROXIDES WITH AMMONIUM OXALATE/OXALIC ACID |
| EN 16123:2013 | Characterization of waste - Guidance on selection and application of screening methods |
| I.S. EN 15192:2006 | CHARACTERISATION OF WASTE AND SOIL - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION |
| PD CEN/TS 16675:2014 | Characterisation of waste. Test methods for the determination of the monolithic status of waste |
| S.R. CEN/TR 17105:2017 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE USE OF ECOTOXICITY TESTS APPLIED TO CONSTRUCTION PRODUCTS |
| S.R. CEN/TS 16023:2013 | CHARACTERIZATION OF WASTE - DETERMINATION OF GROSS CALORIFIC VALUE AND CALCULATION OF NET CALORIFIC VALUE |
| I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| FD CEN/TR 16130 : 2011 FD | CHARACTERIZATION OF WASTE - ON-SITE VERIFICATION |
| CEN/TS 16675:2014 | Characterisation of waste - Test methods for the determination of the monolithic status of waste |
| I.S. EN 15527:2008 | CHARACTERIZATION OF WASTE - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN WASTE USING GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC/MS) |
| DIN EN 15192 E : 2007 | CHARACTERISATION OF WASTE AND SOIL - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION |
| UNI CEN/TS 15862 : 2012 | CHARACTERISATION OF WASTE - COMPLIANCE LEACHING TEST - ONE STAGE BATCH LEACHING TEST FOR MONOLITHS AT FIXED LIQUID TO SURFACE AREA RATIO (L/A) FOR TEST PORTIONS WITH FIXED MINIMUM DIMENSIONS |
| ONORM EN 15527 : 2008 | CHARACTERIZATION OF WASTE - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN WASTE USING GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC/MS) |
| PD CEN/TS 15864:2012 | Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| DIN EN ISO 12782-2:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO 12782-2:2012) |
| PD CEN/TS 16637-3:2016 | Construction products. Assessment of release of dangerous substances Horizontal up-flow percolation test |
| UNI CEN/TS 16023 : 2014 | CHARACTERIZATION OF WASTE - DETERMINATION OF GROSS CALORIFIC VALUE AND CALCULATION OF NET CALORIFIC VALUE |
| BS EN 15936:2012 | Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion |
| 12/30266953 DC : 0 | BS EN 16424 - CHARACTERIZATION OF WASTE - SCREENING METHOD FOR THE ELEMENTAL COMPOSITION BY PORTABLE X-RAY FLUORESCENCE INSTRUMENTS |
| I.S. EN 15863:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
| DIN EN 16377:2013-12 | Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste |
| PD CEN/TS 16384:2012 | Synthetic sport systems. Leaching test |
| 10/30147469 DC : 0 | BS EN 16169 - SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
| BS EN 15413:2011 | Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample |
| PD CEN/TS 16660:2015 | Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacity |
| PD CLC/TS 50625-3-2:2016 | Collection, logistics & treatment requirements for WEEE Technical specification for de-pollution. Lamps |
| PD CEN/TS 16023:2013 | Characterization of waste. Determination of gross calorific value and calculation of net calorific value |
| DIN EN 14429 E : 2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
| BS EN 16169:2012 | Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogen |
| DIN EN 14997 E : 2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| DIN EN 16169:2012-11 | SLUDGE, TREATED BIOWASTE AND SOIL - DETERMINATION OF KJELDAHL NITROGEN |
| I.S. EN 15875:2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
| DIN EN 15875:2012-11 | Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste (includes Corrigendum :2012) |
| S.R. CLC/TS 50625-3-1:2015 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-1: SPECIFICATION FOR DE-POLLUTION - GENERAL |
| UNI EN 15934 : 2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - CALCULATION OF DRY MATTER FRACTION AFTER DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| 08/30185782 DC : DRAFT OCT 2008 | BS EN 15862 - CHARACTERIZATION OF WASTE - COMPLIANCE LEACHING TEST - ONE STAGE BATCH LEACHING TEST FOR MONOLITHS AT A FIXED LIQUID TO SURFACE AREA RATIO (L/A) FOR TEST PORTIONS WITH FIXED MINIMUM DIMENSIONS |
| DIN EN 14429:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
| DIN EN 15934 E : 2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - CALCULATION OF DRY MATTER FRACTION AFTER DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| DD CEN/TS 15440:2006 | Solid recovered fuels. Method for the determination of biomass content |
| 12/30263896 DC : 0 | BS EN 16457 - CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| UNI CEN/TS 16384 : 2012 | SYNTHETIC SPORT SYSTEMS - LEACHING TEST |
| 08/30185785 DC : DRAFT OCT 2008 | BS EN 15863 - CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
| BS EN ISO 12782-2:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of crystalline iron oxides and hydroxides with dithionite |
| 09/30179897 DC : 0 | BS ISO 15192 - SOIL QUALITY - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION |
| UNI EN 15875 : 2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
| UNI CEN/TS 16675 : 2014 | CHARACTERISATION OF WASTE - TEST METHODS FOR THE DETERMINATION OF THE MONOLITHIC STATUS OF WASTE |
| UNI EN 16377 : 2014 | CHARACTERIZATION OF WASTE - DETERMINATION OF BROMINATED FLAME RETARDANTS (BFR) IN SOLID WASTE |
| UNI EN ISO 12782-2 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 2: EXTRACTION OF CRYSTALLINE IRON OXIDES AND HYDROXIDES WITH DITHIONITE |
| CLC/TS 50625-3-4:2017 | Collection, logistics & treatment requirements for WEEE - Part 3-4: Specification for de-pollution - temperature exchange equipment |
| DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| DIN EN 15443 E : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE LABORATORY SAMPLE |
| S.R. CEN/TR 16176:2011 | CHARACTERIZATION OF WASTE - SCREENING METHODS FOR ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE SPECTROMETRY FOR ON-SITE VERIFICATION |
| CEI CLC/TS 50625-3-4 : 1ED 2018 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3- 4: SPECIFICATION FOR DE-POLLUTION - TEMPERATURE EXCHANGE EQUIPMENT |
| UNI EN ISO 12782-4 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 4: EXTRACTION OF HUMIC SUBSTANCES FROM SOLID SAMPLES |
| PREN 14582 : DRAFT 2015 | CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| I.S. EN 62321-3-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
| I.S. EN 15934:2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - CALCULATION OF DRY MATTER FRACTION AFTER DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| I.S. EN 14429:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
| CEI CLC/TS 50625-3-2 : 1ED 2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-2: TECHNICAL SPECIFICATION FOR DE-POLLUTION - LAMPS |
| S.R. CEN/TS 15864:2015 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH CONTINUOUS LEACHANT RENEWAL UNDER CONDITIONS RELEVANT FOR SPECIFIED SCENARIO(S) |
| UNE-EN 15413:2012 | Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample |
| I.S. EN 15309:2007 | CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
| I.S. CEN TS 15440:2006 | SOLID RECOVERED FUELS - METHOD FOR THE DETERMINATION OF BIOMASS CONTENT |
| PD CEN/TS 15862:2012 | Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
| PD CEN/TS 15863:2012 | Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions |
| UNE-EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| BS EN 14582:2007 | Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods |
| BS EN 15863:2015 | Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| ISO 12782-1:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid |
| BS EN 15192:2006 | Characterisation of waste and soil. Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| ISO 12782-3:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid |
| ISO 12782-4:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 4: Extraction of humic substances from solid samples |
| BS EN 14346:2006 | Characterization of waste. Calculation of dry matter by determination of dry residue or water content |
| DIN EN 15934:2012-11 | Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content |
| EN 16169:2012 | Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen |
| EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| EN 15934:2012 | Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content |
| EN 15936:2012 | Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion |
| EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| EN ISO 12782-4:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) |
| EN ISO 12782-3:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO 12782-3:2012) |
| EN ISO 12782-2:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO 12782-2:2012) |
| EN 14346:2006 | CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
| EN 16377:2013 | Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste |
| EN ISO 12782-1:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO 12782-1:2012) |
| EN 15527:2008 | Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) |
| I.S. CEN TS 14997:2006 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH-CONTROL |
| CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General |
| S.R. CLC/TS 50625-3-3:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAYS |
| BS EN 15527:2008 | Characterization of waste. Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) |
| ISO 18227:2014 | Soil quality — Determination of elemental composition by X-ray fluorescence |
| 13/30286649 DC : 0 | BS EN 14429 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
| S.R. CEN/TS 16384:2012 | SYNTHETIC SPORT SYSTEMS - LEACHING TEST |
| 13/30286658 DC : 0 | BS EN 16660 - CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - DETERMINATION OF THE REDUCING CHARACTER AND THE REDUCING CAPACITY |
| DIN EN 15527 E : 2008 | CHARACTERIZATION OF WASTE - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN WASTE USING GAS CHROMATOGRAPHY MASS SPECTROMETRY (GC/MS) |
| BS EN 14429:2015 | Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base addition |
| S.R. CLC/TS 50574-2:2014 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR END-OF-LIFE HOUSEHOLD APPLIANCES CONTAINING VOLATILE FLUOROCARBONS OR VOLATILE HYDROCARBONS - PART 2: SPECIFICATION FOR DE-POLLUTION |
| DIN EN 16457 E : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| 15/30330799 DC : 0 | BS EN 15308 - CHARACTERIZATION OF WASTE - DETERMINATION OF SELECTED POLYCHLORINATED BIPHENYLS (PCB) IN SOLID WASTE BY GAS CHROMATOGRAPHY WITH ELECTRON CAPTURE OR MASS SPECTROMETRIC DETECTION |
| DIN EN ISO 12782-1:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO 12782-1:2012) |
| 12/30255723 DC : 0 | BS EN 16377 - CHARACTERIZATION OF WASTE - DETERMINATION OF BROMINATED FLAME RETARDANTS (BFR) IN SOLID WASTE |
| UNE-EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| BS EN ISO 12782-4:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of humic substances from solid samples |
| 13/30286652 DC : 0 | BS EN 14997 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| CLC/TS 50574-2:2014 | Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons - Part 2: specification for de-pollution |
| 15/30319011 DC : DRAFT APR 2015 | BS EN 14582 - CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| BS EN 15443:2011 | Solid recovered fuels. Methods for the preparation of the laboratory sample |
| NF EN 15875 : 2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
| BS EN 16457:2014 | Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report |
| BS EN 15169:2007 | Characterization of waste. Determination of loss on ignition in waste, sludge and sediments |
| 08/30189276 DC : 0 | BS EN 15875 - CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL OF SULFIDIC WASTE |
| UNE-EN 15875:2012 | Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste |
| I.S. EN 15308:2016 | CHARACTERIZATION OF WASTE - DETERMINATION OF SELECTED POLYCHLORINATED BIPHENYLS (PCB) IN SOLID WASTE BY GAS CHROMATOGRAPHY WITH ELECTRON CAPTURE OR MASS SPECTROMETRIC DETECTION |
| UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
| NF ISO 15192 : 2011 | SOIL QUALITY - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION |
| I.S. EN ISO 12782-3:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 3: EXTRACTION OF ALUMINIUM OXIDES AND HYDROXIDES WITH AMMONIUM OXALATE/OXALIC ACID (ISO 12782-3:2012) |
| S.R. CEN/TS 16660:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - DETERMINATION OF THE REDUCING CHARACTER AND THE REDUCING CAPACITY |
| CEN/TR 17105:2017 | Construction products - Assessment of release of dangerous substances - Guidance on the use of ecotoxicity tests applied to construction products |
| I.S. EN 16377:2013 | CHARACTERIZATION OF WASTE - DETERMINATION OF BROMINATED FLAME RETARDANTS (BFR) IN SOLID WASTE |
| UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| CEI CLC/TS 50625-3-3 : 1ED 2018 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAY |
| I.S. CEN TS 15413:2006 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE |
| I.S. CEN TS 15443:2006 | SOLID RECOVERED FUELS - METHODS FOR LABORATORY SAMPLE PREPARATION |
| DIN EN 14346 E : 2007 | CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| 13/30286655 DC : 0 | BS EN 15863 - CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
| CEN/TS 15440:2006 | Solid recovered fuels - Method for the determination of biomass content |
| CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| CEN/TS 14997 : 2006 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH-CONTROL |
| EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography |
| EN 14429:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition |
| DIN EN 14346:2007-03 | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| CEN/TS 16660:2015 | Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity |
| EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| CEN/TR 16130:2011 | Characterization of waste - On-site verification |
| CEN/TR 16176:2011 | Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| CEN/TS 15863:2012 | Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions |
| CEN/TS 15443:2006 | Solid recovered fuels - Methods for laboratory sample preparation |
| EN ISO 22155:2016 | Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2016) |
| CEN/TR 15310-2 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 2: GUIDANCE ON SAMPLING TECHNIQUES |
| ISO 5664:1984 | Water quality — Determination of ammonium — Distillation and titration method |
| ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| ISO 11074:2015 | Soil quality — Vocabulary |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN 27888 : 1993 | WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| ISO 11969:1996 | Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique) |
| EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| ISO 11083:1994 | Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
| EN ISO 12846:2012 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
| EN ISO 14403-2:2012 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012) |
| EN 26777 : 1993 | WATER QUALITY - DETERMINATION OF NITRITE - MOLECULAR ABSORPTION SPECTROMETRIC METHOD |
| ISO 10381-6:2009 | Soil quality Sampling Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 13877:1998 | Soil quality Determination of polynuclear aromatic hydrocarbons Method using high -performance liquid chromatography |
| ISO 11464:2006 | Soil quality Pretreatment of samples for physico-chemical analysis |
| ISO 14403-2:2012 | Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA) |
| CEN/TR 15310-1 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 1: GUIDANCE ON SELECTION AND APPLICATION OF CRITERIA FOR SAMPLING UNDER VARIOUS CONDITIONS |
| EN 1484 : 1997 | WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC) |
| ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
| EN 13137 : 2001 | CHARACTERIZATION OF WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) IN WASTE, SLUDGES AND SEDIMENTS |
| ISO 12846:2012 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment |
| EN 15308:2016 | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
| EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
| ISO 5667-15:2009 | Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples |
| EN 14346:2006 | CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
| ISO 6777:1984 | Water quality — Determination of nitrite — Molecular absorption spectrometric method |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 10382:2002 | Soil quality — Determination of organochlorine pesticides and polychlorinated biphenyls — Gas-chromatographic method with electron capture detection |
| ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
| ISO 10381-7:2005 | Soil quality Sampling Part 7: Guidance on sampling of soil gas |
| ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
| ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
| ISO 14507:2003 | Soil quality Pretreatment of samples for determination of organic contaminants |
| ISO 7888:1985 | Water quality — Determination of electrical conductivity |
| ISO 22155:2016 | Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 15192:2006 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| EN ISO 11074:2015 | Soil quality - Vocabulary (ISO 11074:2015) |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
| EN 15169:2007 | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| EN 13656 : 2002 | CHARACTERIZATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]), AND HYDROCHLORIC (HCL) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS |
| EN 14345 : 2004 | CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT BY GRAVIMETRY |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 14039 : 2004 | CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT IN THE RANGE OF C[10] TO C[40] BY GAS CHROMATOGRAPHY |
| EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| EN ISO 9562:2004 | Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
| EN ISO 5667-15:2009 | Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| CEN/TS 14405 : 2004 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| ISO 14403-1:2012 | Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) |
| ISO 10523:2008 | Water quality — Determination of pH |
| EN ISO 14403-1:2012 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012) |
| CEN/TR 15310-3 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 3: GUIDANCE ON PROCEDURES FOR SUB-SAMPLING IN THE FIELD |
| CEN/TS 15862:2012 | Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
| EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |
| CEN/TR 15310-4 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
| EN ISO 11969:1996 | WATER QUALITY - DETERMINATION OF ARSENIC - ATOMIC ABSORPTION SPECTROMETRIC METHOD (HYDRIDE TECHNIQUE) |
| EN ISO 14402 : 1999 | WATER QUALITY - DETERMINATION OF PHENOL INDEX BY FLOW ANALYSIS (FIA AND CFA) |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| CEN/TR 15310-5:2006 | Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan |
| EN ISO 13395 : 1996 | WATER QUALITY - DETERMINATION OF NITRITE NITROGEN AND NITRATE NITROGEN AND THE SUM OF BOTH BY FLOW ANALYSIS (CFA AND FIA) AND SPECTROMETRIC DETECTION |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.