EN 1514-4:1997
Current
Current
The latest, up-to-date edition.
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
Published date
23-04-1997
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 DN
3.2 PN
4 Designations
4.1 Range of PN designations
4.2 Range of DN (nominal sizes)
4.3 Gasket types
4.4 Information to be supplied by the purchaser
5 Gasket designs
6 Gasket types
7 Dimensions
8 Marking
Annexes
A (informative) Information to be supplied by the purchaser
B (informative) A-deviation
This standard specifies the dimensions and marking of IBC (inside bolt circle) corrugated, flat or grooved metallic and filled metallic gaskets for use in conjunction with flanges complying with EN 1092: Part 1 for PN 10, PN 16, PN 25,PN 40, PN 63 and PN 100, up to and including DN 900.
| Committee |
CEN/TC 74
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 1514-4 : 1997 | Identical |
| NS EN 1514-4 : 1ED 1997 | Identical |
| DIN EN 1514-4 E : 1997 | Identical |
| UNI EN 1514-4 : 1998 | Identical |
| BS EN 1514-4:1997 | Identical |
| I.S. EN 1514-4:1997 | Identical |
| NBN EN 1514-4 : 1997 | Identical |
| SN EN 1514-4 : 1997 | Identical |
| PN EN 1514-4 : 2001 | Identical |
| NF EN 1514-4 : 1997 | Identical |
| UNE-EN 1514-4:1997 | Identical |
| DIN EN 1514-4:1997-08 | Identical |
| 05/30132854 DC : DRAFT APR 2005 | EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| PREN 13555 : DRAFT 2011 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| DIN EN 12007-3:2015-07 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL |
| BS EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| BS EN 12308:1998 | Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping |
| BS EN 14772:2005 | Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| EN 1092-3:2003/AC:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
| DIN EN 14772 E : 2005 | FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS |
| I.S. EN 14772:2005 | FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
| I.S. EN 1092-3:2003 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
| EN 14772:2005 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| I.S. EN 13555:2014 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| EN 13555:2014 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| I.S. EN 12007-3:2015 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| VDI 2200:2007-06 | Tight flange connections - Selection, calculation, design and assembly of bolted flange connections |
| 03/114555 DC : DRAFT SEP 2003 | EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
| 13/30258750 DC : 0 | BS EN 12007-3 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| 11/30248108 DC : 0 | BS EN 13555 - FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN EN 14525 E : 2005 | DUCTILE IRON WIDE TOLERANCE COULINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT |
| UNI EN 14525 : 2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| I.S. EN 14525:2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| I.S. EN 12308:1999 | INSTALLATIONS AND EQUIPMENT FOR LNG - SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| NF EN 14772 : 2005 | FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
| DIN EN 1092-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 |
| BS EN 13555:2014 | Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| BS EN 12007-3:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel |
| BS EN 1092-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges |
| UNE-EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| BS ISO 7005-1:2011 | Pipe flanges Steel flanges for industrial and general service piping systems |
| PREN 12007-3 : DRAFT 2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| DIN EN 13555:2014-07 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| DIN EN 14772:2005-04 | Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
| EN 12308 : 1998 | INSTALLATIONS AND EQUIPMENT FOR LNG - SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING |
| UNI EN 13555 : 2014 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| DIN EN 14525:2005-02 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.