Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 15274:2015

Current
Current

The latest, up-to-date edition.

General purpose adhesives for structural assembly - Requirements and test methods
Published date

15-04-2015

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics for intended uses
5 Requirements
6 Assessment and verification of constancy of
  performance (AVCP)
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Regulation
Bibliography

This European Standard specifies requirements for adhesives intended for use in the creation and general assembly of load-bearing, structural elements used in civil engineering works and the construction of buildings. Other than the exceptions stated, it embraces all combinations of bonded materials, used to create or repair load-bearing elements.It covers individual adhesives and special purpose kits comprising various combinations of adhesive types and components.It includes test methods and methods of assessment.The performance requirements in this standard may not be applicable to highly specialised applications in extreme environmental conditions, e.g. cryogenic use, nor do they cover specialised circumstances such as accidental impact, e.g. due to traffic or ice, or earthquake loading where specific performance requirements will apply.The intended use is for internal and external construction elements and those cladding and covering elements (excluding ceramic tiles) specifically required, by regulatory authorities, to provide protection from fire in identified building zones, including escape routes.This European Standard does not cover:-Prefabricated, bonded structural components;-Concrete bonded either to itself or steel or a material based on carbon fibre;-Wood, when bonded to itself to form a timber based, laminated beam [of the type known as a ‘Glulam’ beam] intended for use as a major structural, load bearing element;-Thermoplastics [e.g. polyethylene, polypropylene, polyamide and fluorinated polymers in general] unless they have been specifically prepared [usually through a specialised oxidative process] for bonded assembly on site;-Co-axial metallic assemblies comprising fasteners- threaded and otherwise, pipes and tubes;-Glass assemblies in structural glazing applications made using silicone adhesives;-Those structural elements that are permanently immersed in water.

Committee
CEN/TC 193
DevelopmentNote
Supersedes PREN 15274. (04/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
UNI EN 15274:2015 Identical
I.S. EN 15274:2015 Identical
UNI EN 15274 : 2008 Identical
DIN EN 15274 E : 2015 Identical
NF EN 15274 : 2015 Identical
NBN EN 15274 : 2015 Identical
NS EN 15274 : 2007 Identical
PN EN 15274 : 2015 Identical
NEN EN 15274 : 2015 Identical
UNE-EN 15274:2015 Identical
DIN EN 15274:2015-06 Identical
BS EN 15274:2015 Identical
SN EN 15274:2015 Identical

EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)
EN 13999-4:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates
EN ISO 15605:2004 Adhesives - Sampling (ISO 15605:2000)
ISO 6721-2:2008 Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method
EN ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
EN 1067:2005 Adhesives - Examination and preparation of samples for testing
EN ISO 75-3:2004/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
EN 13999-1:2013 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
ISO 15605:2000 Adhesives Sampling
EN 1242:2013 Adhesives - Determination of isocyanate content
EN ISO 6721-2:2008 Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
ISO 11343:2003 Adhesives Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions Wedge impact method
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN ISO 9664:1995 Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993)
ISO 14896:2009 Plastics Polyurethane raw materials Determination of isocyanate content
EN 1877-2:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number
ISO 11909:2007 Binders for paints and varnishes — Polyisocyanate resins — General methods of test
EN 12092:2001 Adhesives - Determination of viscosity
ISO 11339:2010 Adhesives T-peel test for flexible-to-flexible bonded assemblies
EN 14022:2010 Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 15109:1998 Adhesives Determination of the time to rupture of bonded joints under static load
ISO 9001:2015 Quality management systems — Requirements
EN 15336:2007 Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified)
EN 1877-1:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent
EN 13999-2:2013 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
EN 1504-8:2016 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)
EN ISO 11909:2007 Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)
EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003)
EN 923 : 2015 COR 2016 ADHESIVES - TERMS AND DEFINITIONS
ISO 75-3:2004 Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
CEN/TR 14548:2003 Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
EN ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
ISO 178:2010 Plastics Determination of flexural properties
EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
ISO 9664:1993 Adhesives Test methods for fatigue properties of structural adhesives in tensile shear
EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more