Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1594:2013

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
Withdrawn date

31-03-2014

Published date

11-09-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Quality and management systems
5 Safety and the environment
6 Pressure safety
7 Design
8 Materials and components
9 Construction
10 Operation and maintenance
Annex A (informative) - Settlement areas
Annex B (informative) - Mining subsidence
Annex C (informative) - Frost heave
Annex D (informative) - Landslide areas
Annex E (informative) - Areas with high seismic risk
Annex F (informative) - Soil mechanics parameters
Annex G (informative) - Bored/jacked crossings
Annex H (informative) - Allowable pulsation and vibration
        levels
Annex I (informative) - Allowable vibration levels from
        construction work - blasting
Annex J (informative) - Significant technical changes between
        this European Standard and the previous edition
Bibliography

This European Standard is applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 in onland gas infrastructure.This European Standard is also applicable to pipelines with a maximum operating pressure (MOP) over 16 bar for the carriage of non-conventional gases such as injected biomethane, complying with EN ISO 13686 and for which a detailed technical evaluation of the functional requirements is performed ensuring there are no other constituents or properties of the gases that can affect the integrity of the pipeline.Onland gas infrastructure is where:-pipeline elements are made of unalloyed or low-alloyed carbon steel;-pipeline elements are joined by welds, flanges or mechanical couplings;-the pipeline is not located within commercial or industrial premises as an integral part of the industrial process on these premises except for any pipelines and facilities supplying such premises;-the design temperature of the system is between −40 °C and 120 °C inclusive.This European Standard applies to onshore pipeline systems from the point where the pipeline first crosses what is normally accepted as battery limit between on and offshore, e.g.:-first isolation valve;-the base of steep sea shelf;-above the high water/low water mark onto mainland;-an island.This European Standard also applies to a pipeline system with a starting point onshore, also when parts of the pipeline system on the mainland subsequently cross fjords, lakes etc.This European Standard does not apply to existing pipelines, in use prior to the publication of this European Standard, nor to modifications to existing pipelines.Gas infrastructures covered by this European Standard begin after the gas producer's metering station. The functional demarcation of the pipeline system within a plant area will be determined from case to case. Generally speaking, this will be directly after the first isolating valve of the installation.This European Standard also describes the mechanical requirements for pipework in stations with a maximum operating pressure greater than 16 bar. Welding requirements are described in a special application standard on welding for gas infrastructures EN 12732. Functional requirements for stations are given in:-EN 1776, Gas supply systems — Natural gas measuring stations — Functional requirements-EN 1918 5, Gas supply systems — Underground gas storage — Part 5: Functional recommendations for surface facilities-EN 12186, Gas supply systems — Gas pressure regulating stations for transmission and distribution — Functional requirements-EN 12583, Gas supply systems — Compressor stations — Functional requirementsThis European Standard specifies common basic principles for gas infrastructures. Users of this European Standard should be aware that there may exist more detailed national standards and codes of practice in the CEN member countries.This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above mentioned principles.In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this European Standard, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).NOTECEN/TR 13737 (all parts) contains:-clarification of relevant legislation/regulations applicable in a country;-if appropriate, more restrictive national requirements;-national contact point for the latest information.Reference is made in this European Standard to relevant European and other recognised standards for products used to construct and operate gas infrastructures.A schematic representation of pipelines for gas transmission is given in Figure 1.

Committee
CEN/TC 234
DevelopmentNote
Supersedes PREN 1594. (09/2013)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn
Supersedes

Standards Relationship
BS EN 1594:2013 Identical
NF EN 1594 : 2014 Identical
NS EN 1594 : 2013 Identical
UNE-EN 1594:2014 Identical
NBN EN 1594 : 2013 Identical
SN EN 1594 : 2013 Identical
DIN EN 1594:2013-12 Identical
NEN EN 1594 : 2013 Identical
PN EN 1594 : 2014 Identical
I.S. EN 1594:2013 Identical
UNI EN 1594 : 2013 Identical
DS EN 1594 : 2013 Identical

14/30298608 DC : 0 BS EN 1918-5 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES
09/30186448 DC : 0 BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
14/30288159 DC : 0 BS EN 16726 - GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H
PREN 12007-1 : DRAFT 2010 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 1: GENERAL FUNCTIONAL RECOMMENDATIONS
13/30277457 DC : 0 BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
PREN 14141 : DRAFT 2011 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
DIN EN 12007-3:2015-07 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL
DIN EN 10208-1:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN 12327:2012 Gas infrastructure. Pressure testing, commissioning and decommissioning procedures. Functional requirements
I.S. EN 12583:2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN 13941:2003-10 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DIRECT HEATING
CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 12007-1:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
EN 16348:2013 Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements
CEN/TS 15174:2006 Gas supply systems - Guideline for safety management systems for natural gas transmission pipelines
EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
EN 12327:2012 Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements
DIN EN 16348:2013-09 Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements
I.S. EN 10208-2:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
13/30280729 DC : 0 BS EN 12186 - GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
PD CEN/TR 16395:2012 Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
BS ISO 15589-1 : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES
BS EN 16348:2013 Gas infrastructure. Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines. Functional requirements
BS ISO 27913:2016 Carbon dioxide capture, transportation and geological storage. Pipeline transportation systems
PREN 12186 : DRAFT 2013 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
CSA Z662 PACKAGE : 2011 CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS
16/30338132 DC : 0 BS EN 15399 - GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEMS FOR GAS NETWORKS WITH MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR
S.R. CEN/TR 13737-2:2014 GAS INFRASTRUCTURE - IMPLEMENTATION GUIDE FOR FUNCTIONAL STANDARDS PREPARED BY CEN/TC 234 - PART 2: NATIONAL PAGES RELATED TO CEN/TC 234 STANDARDS
I.S. EN 16726:2015 GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H
DIN EN 1993-4-3:2010-12 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNE-EN 12186:2015 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
DIN EN 10208-2:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
DIN EN 1776:2016-05 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
DIN EN 12583:2000-11 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
I.S. EN 12327:2012 GAS INFRASTRUCTURE - PRESSURE TESTING, COMMISSIONING AND DECOMMISSIONING PROCEDURES - FUNCTIONAL REQUIREMENTS
DIN EN 10208-1:1998-02 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
I.S. EN 1993-4-3:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
I.S. EN 12186:2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
I.S. EN 14141:2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN 13941:2009 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
I.S. EN 1776:2015 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
I.S. EN 12007-1:2012 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 1: GENERAL FUNCTIONAL REQUIREMENTS
I.S. EN 12007-3:2015 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
I.S. EN ISO 15589-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES (ISO 15589-1:2015)
I.S. EN 15001-2:2008 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE
15/30292338 DC : 0 BS ISO 27913 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - PIPELINE TRANSPORTATION SYSTEMS
11/30235499 DC : 0 BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
08/30182454 DC : DRAFT JULY 2008 BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNE-EN 16348:2014 Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements
I.S. EN 16348:2013 GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEM (SMS) FOR GAS TRANSMISSION INFRASTRUCTURE AND PIPELINE INTEGRITY MANAGEMENT SYSTEM (PIMS) FOR GAS TRANSMISSION PIPELINES - FUNCTIONAL REQUIREMENTS
10/30208792 DC : 0 BS EN 12007-1 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 1: GENERAL FUNCTIONAL RECOMMENDATIONS
05/30128234 DC : DRAFT FEB 2005 EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
PREN 13941 : DRAFT 2009 DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
11/30253117 DC : 0 BS EN 16348 - SAFETY MANAGEMENT SYSTEM (SMS) FOR GAS INFRASTRUCTURE AND PIPELINE INTEGRITY MANAGEMENT SYSTEM (PIMS) FOR GAS TRANSMISSION PIPELINES - FUNCTIONAL REQUIREMENTS
I.S. CEN TS 15173:2006 GAS SUPPLY SYSTEMS - FRAME OF REFERENCE REGARDING PIPELINE INTEGRITY MANAGEMENT SYSTEM (PIMS)
PREN 1918-5 : DRAFT 2014 GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES
UNI EN 15001-2 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE
CAN/CSA-Z662-15 Oil and gas pipeline systems
DIN EN 16726:2016-04 GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H
DIN EN 12327:2012-10 GAS INFRASTRUCTURE - PRESSURE TESTING, COMMISSIONING AND DECOMMISSIONING PROCEDURES - FUNCTIONAL REQUIREMENTS
DIN EN 12583:2014-07 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN 12186:2014-12 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
UNE-EN 10208-1:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
DIN EN 14141:2013-08 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 10208-2:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
BS EN 1993-4-3:2007 Eurocode 3. Design of steel structures Pipelines
BS EN 12007-1:2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar General functional requirements
EN ISO 15589-1:2017 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015, Corrected version 2020-11)
UNI EN 10208-2 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN 12186 : 2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
UNI EN 13941 : 2011 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
UNI EN 12007-1 : 2012 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 1: GENERAL FUNCTIONAL REQUIREMENTS
UNI EN 1993-4-3 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNI EN 10208-1 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 14141 : 2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNI EN 12327 : 2012 GAS INFRASTRUCTURE - PRESSURE TESTING, COMMISSIONING AND DECOMMISSIONING PROCEDURES - FUNCTIONAL REQUIREMENTS
UNI EN 12583 : 2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
UNI CEN/TR 16395 : 2014 GAS INFRASTRUCTURE - CEN/TC 234 PRESSURE DEFINITIONS GUIDELINE DOCUMENT
12/30258747 DC : DRAFT MAR 2012 BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN 16726 E : 2016 GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H
PREN 15001-2 : DRAFT 2017 GAS SUPPLY SYSTEMS - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE
BS EN 15001-2:2008 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance
ISO 27913:2016 Carbon dioxide capture, transportation and geological storage Pipeline transportation systems
IEC PAS 62424:2005 Representation of process control engineering requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
16/30342037 DC : 0 BS EN 13941-1 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 1: DESIGN
UNI EN 16348 : 2013 GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEM (SMS) FOR GAS TRANSMISSION INFRASTRUCTURE AND PIPELINE INTEGRITY MANAGEMENT SYSTEM (PIMS) FOR GAS TRANSMISSION PIPELINES - FUNCTIONAL REQUIREMENTS
S.R. CEN/TR 16395:2012 GAS INFRASTRUCTURE - CEN/TC 234 PRESSURE DEFINITIONS - GUIDELINE DOCUMENT
PREN 15399 : DRAFT 2016 GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEMS FOR GAS NETWORKS WITH MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR
UNE-EN 10208-2:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 12007-1:2012-10 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements; German version EN 12007-1:2012
BS EN 12583:2014 Gas Infrastructure. Compressor stations. Functional requirements
BS EN 12186:2014 Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements
UNE-EN 1776:2017 Gas infrastructure - Gas measuring systems - Functional requirements
BS EN 1776:2015 Gas infrastructure. Gas measuring systems. Functional requirements
UNE-EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
BS EN 12007-3:2000 Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel
UNE-EN 12327:2013 Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements
BS EN 13941 : 2009 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
UNE-EN 12007-1:2013 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
UNE-EN 12007-3:2015 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 15001-2:2008 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
EN 13941:2009+A1:2010 Design and installation of preinsulated bonded pipe systems for district heating
EN 16726:2015 Gas infrastructure - Quality of gas - Group H
EN 1993-4-3:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
CEN/TR 13737-2:2014 Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards
I.S. EN 10208-1:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
11/30248438 DC : 0 BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
BS EN 16726 : 2015 GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
08/30182457 DC : DRAFT JULY 2008 BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
PD CEN/TR 13737-2:2014 Gas infrastructure. Implementation Guide for Functional Standards prepared by CEN/TC 234 National Pages related to CEN/TC 234 standards
UNE-EN 16726:2016 Gas infrastructure - Quality of gas - Group H
I.S. CEN TS 15174:2006 GAS SUPPLY SYSTEMS - GUIDELINE FOR SAFETY MANAGEMENT SYSTEMS FOR NATURAL GAS TRANSMISSION PIPELINES
BS EN ISO 15589-1:2017 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline systems On-land pipelines
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
BS EN 10208-1:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A
EN 12007-3:2015 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
CEN/TS 15173:2006 Gas supply systems - Frame of reference regarding Pipeline Integrity Management System (PIMS)
EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 15001-2:2010-04 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance

EN 12732:2013+A1:2014 Gas infrastructure - Welding steel pipework - Functional requirements
EN 12327:2012 Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 13686:2013 Natural gas - Quality designation (ISO 13686:2013)
EN 14870-2:2004 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified)
EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
EN 12007-3:2015 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
EN 12560-1:2001 Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
EN 12560-3:2001 Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
ISO 15590-1:2009 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends
EN 12560-2:2013 Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN 12007-1:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
EN 12560-4:2001 Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 12954 : 2001 CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
ISO 50001:2011 Energy management systems Requirements with guidance for use
EN 10301:2003 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
ISO 13686:2013 Natural gas Quality designation
EN 15001-2:2008 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
ISO 15590-3:2004 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 15590-2:2003 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings
EN 10204:2004 Metallic products - Types of inspection documents
EN 12068:1998 Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions
ISO 9001:2015 Quality management systems — Requirements
EN 12007-2:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
EN 12007-4:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation
EN 1515-3:2005 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
EN 1918-5:2016 Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities
EN 16348:2013 Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements
EN 14870-3:2006 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified)
EN ISO 50001:2011 Energy management systems - Requirements with guidance for use (ISO 50001:2011)
EN 14870-1:2011 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more