EN 16602-10-09:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Space product assurance - Nonconformance control system
Superseded date
26-03-2020
Published date
10-09-2014
Publisher
Foreword
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Nonconformance control system principles
5 Nonconformance processing requirements
6 Special nonconformance control requirements
Annex A (normative) - Nonconformance
Report - DRD
Annex B (normative) - NCR Status
List - DRD
Annex C (informative) - Nonconformance
report template
Bibliography
This Standard defines the requirements for the control of nonconformances.This Standard applies to all deliverable products and supplies, at all levels, which fail to conform to project requirements.This Standard is applicable throughout the whole project lifecycle as defined in ECSS-M-ST-10.This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.
| Committee |
CEN/CLC/JTC 5
|
| DevelopmentNote |
Supersedes EN 14097. (09/2014) Supersedes UNE EN 14097. (11/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| CEI UNI EN 16602-10-09 : 1ED 2016 | Identical |
| DIN EN 16602-10-09:2014-12 | Identical |
| ONORM EN 16602-10-09 : 2015 | Identical |
| NF EN 16602-10-09 : 2015 | Identical |
| NBN EN 16602-10-09 : 2014 | Identical |
| NEN EN 16602-10-09 : 2014 | Identical |
| NS EN 16602-10-09 : 2014 | Identical |
| I.S. EN 16602-10-09:2014 | Identical |
| PN EN 16602-10-09 : 2014 | Identical |
| UNI CEI EN 16602-10-09 : 2015 | Identical |
| SS-EN 16602-10-09:2014 | Identical |
| SN EN 16602-10-09:2014 | Identical |
| BS EN 16602-10-09:2014 | Identical |
| UNE-EN 16602-10-09:2014 | Identical |
| UNE-EN 16602-10-09:2020 | Identical |
| BS EN 16602-70-21:2014 | Space product assurance. Flammability testing for the screening of space materials |
| BS EN 16602-30-02:2014 | Space product assurance. Failure modes, effects (and criticality) analysis (FMEA/FMECA) |
| BS EN 16602-60-15:2014 | Space product assurance. Radiation hardness assurance. EEE components |
| BS EN 16602-70-55:2015 | Space product assurance. Microbiological examination of flight hardware and cleanrooms |
| I.S. EN 16603-70:2015 | SPACE ENGINEERING - GROUND SYSTEMS AND OPERATIONS |
| I.S. EN 16603-32-01:2014 | SPACE ENGINEERING - FRACTURE CONTROL |
| BS EN 16602-60-14:2014 | Space product assurance. Relifing procedure. EEE components |
| BS EN 16602-70-08:2015 | Space product assurance. Manual soldering of high-reliability electrical connections |
| BS EN 16602-70-09:2015 | Space product assurance. Measurements of thermo-optical properties of thermal control materials |
| BS EN 16602-70-18:2014 | Space product assurance. Preparation, assembly and mounting of RF coaxial cables |
| BS EN 16602-70-02:2014 | Space product assurance. Thermal vacuum outgassing test for the screening of space materials |
| BS EN 16602-70-06:2014 | Space product assurance. Particle and UV radiation testing for space materials |
| BS EN 16602-20:2014 | Space product assurance. Quality assurance |
| BS EN 16602-70-56:2015 | Space product assurance. Vapour Phase Bioburden Reduction for Flight Hardware |
| I.S. EN 16602-70-02:2014 | SPACE PRODUCT ASSURANCE - THERMAL VACUUM OUTGASSING TEST FOR THE SCREENING OF SPACE MATERIALS |
| I.S. EN 16602-70-20:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF SILVER-PLATED COPPER WIRE AND CABLE TO 'RED-PLAGUE' CORROSION |
| I.S. EN 16602-20-07:2016 | SPACE PRODUCT ASSURANCE - QUALITY AND SAFETY ASSURANCE FOR SPACE TEST CENTRES |
| I.S. EN 16602-60:2015 | SPACE PRODUCT ASSURANCE - ELECTRICAL, ELECTRONIC AND ELECTROMECHANICAL (EEE) COMPONENTS |
| I.S. EN 16602-70-58:2015 | SPACE PRODUCT ASSURANCE - BIOBURDEN CONTROL OF CLEANROOMS |
| I.S. EN 16603-10-03:2014 | SPACE ENGINEERING - TESTING |
| I.S. EN 16602-70-22:2014 | SPACE PRODUCT ASSURANCE - CONTROL OF LIMITED SHELF-LIFE MATERIALS |
| I.S. EN 16602-70-50:2015 | SPACE PRODUCT ASSURANCE - PARTICLES CONTAMINATION MONITORING FOR SPACECRAFT SYSTEMS AND CLEANROOMS |
| I.S. EN 16602-70-37:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF METALS TO STRESS-CORROSION CRACKING |
| I.S. EN 16602-20-10:2014 | SPACE PRODUCT ASSURANCE - OFF-THE-SHELF ITEMS UTILIZATION IN SPACE SYSTEMS |
| I.S. EN 16602-60-14:2014 | SPACE PRODUCT ASSURANCE - RELIFING PROCEDURE - EEE COMPONENTS |
| 16/30336547 DC : 0 | BS EN 16602-70-39 - SPACE PRODUCT ASSURANCE - PART 70-39: WELDING OF METALLIC MATERIALS FOR FLIGHT HARDWARE |
| BS EN 16602-70-10:2015 | Space product assurance. Qualification of printed circuit boards |
| BS EN 16602-70-29:2014 | Space product assurance. Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| BS EN 16602-70-22:2014 | Space product assurance. Control of limited shelf-life materials |
| BS EN 16602-70-58:2015 | Space product assurance. Bioburden control of cleanrooms |
| BS EN 16602-70-37:2014 | Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking |
| I.S. EN 16602-70-57:2015 | SPACE PRODUCT ASSURANCE - DRY HEAT BIOBURDEN REDUCTION FOR FLIGHT HARDWARE |
| 16/30342495 DC : 0 | BS EN 16602-10 - SPACE PRODUCT ASSURANCE - PRODUCT ASSURANCE MANAGEMENT |
| BS EN 16602-70-50:2015 | Space product assurance. Particles contamination monitoring for spacecraft systems and cleanrooms |
| I.S. EN 16602-70-55:2015 | SPACE PRODUCT ASSURANCE - MICROBIOLOGICAL EXAMINATION OF FLIGHT HARDWARE AND CLEANROOMS |
| I.S. EN 16602-70-53:2015 | SPACE PRODUCT ASSURANCE - MATERIALS AND HARDWARE COMPATIBILITY TESTS FOR STERILIZATION PROCESSES |
| BS EN 16602-70-28:2014 | Space product assurance. Repair and modification of printed circuit board assemblies for space use |
| DIN EN 16601-40:2014-12 | SPACE PROJECT MANAGEMENT - PART 40: CONFIGURATION AND INFORMATION MANAGEMENT |
| BS EN 16603-20-08:2014 | Space engineering Photovoltaic assemblies and components |
| I.S. EN 16602-20-08:2016 | SPACE PRODUCT ASSURANCE - STORAGE, HANDLING AND TRANSPORTATION OF SPACECRAFT HARDWARE |
| BS EN 16602-70-31:2014 | Space product assurance. Application of paints and coatings on space hardware |
| BS EN 16602-70-20:2014 | Space product assurance. Determination of the susceptibility of silver-plated copper wire and cable to \'red-plague\' corrosion |
| BS EN 16602-20-10:2014 | Space product assurance. Off-the-shelf items utilization in space systems |
| I.S. EN 16602-70-18:2014 | SPACE PRODUCT ASSURANCE - PREPARATION, ASSEMBLY AND MOUNTING OF RF COAXIAL CABLES |
| BS EN 16602-70-07:2014 | Space product assurance. Verification and approval of automatic machine wave soldering |
| BS EN 16602-70-13:2015 | Space product assurance. Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
| BS EN 16603-10-03:2014 | Space engineering. Testing |
| BS EN 16602-70-53:2015 | Space product assurance. Materials and hardware compatibility tests for sterilization processes |
| I.S. EN 16602-70-31:2014 | SPACE PRODUCT ASSURANCE - APPLICATION OF PAINTS AND COATINGS ON SPACE HARDWARE |
| I.S. EN 16602-30-02:2014 | SPACE PRODUCT ASSURANCE - FAILURE MODES, EFFECTS (AND CRITICALITY) ANALYSIS (FMEA/FMECA) |
| BS EN 16602-70-26:2014 | Space product assurance. Crimping of high-reliability electrical connections |
| I.S. EN 16601-40:2014 | SPACE PROJECT MANAGEMENT - PART 40: CONFIGURATION AND INFORMATION MANAGEMENT |
| I.S. EN 16602-70-29:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF OFFGASSING PRODUCTS FROM MATERIALS AND ASSEMBLED ARTICLES TO BE USED IN A MANNED SPACE VEHICLE CREW COMPARTMENT |
| I.S. EN 16602-10:2017 | SPACE PRODUCT ASSURANCE - PRODUCT ASSURANCE MANAGEMENT |
| I.S. EN 16603-20-08:2014 | SPACE ENGINEERING - PART 20-08: PHOTOVOLTAIC ASSEMBLIES AND COMPONENTS |
| EN 16602-70-26:2014 | Space product assurance - Crimping of high-reliability electrical connections |
| EN 16603-10:2018 | Space engineering - System engineering general requirements |
| BS EN 16603-32-01:2014 | Space engineering. Fracture control |
| EN 16602-60-14:2014 | Space product assurance - Relifing procedure - EEE components |
| EN 16602-70-53:2015 | Space product assurance - Materials and hardware compatibility tests for sterilization processes |
| EN 16602-60:2015 | Space product assurance - Electrical, electronic and electromechanical (EEE) components |
| EN 16602-70-50:2015 | Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms |
| EN 16602-70-37:2014 | Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking |
| EN 16602-20-10:2014 | Space product assurance - Off-the-shelf items utilization in space systems |
| EN 16602-70-55:2015 | Space product assurance - Microbiological examination of flight hardware and cleanrooms |
| I.S. EN 16602-70-01:2014 | SPACE PRODUCT ASSURANCE - CLEANLINESS AND CONTAMINATION CONTROL |
| I.S. EN 16602-70-04:2014 | SPACE PRODUCT ASSURANCE - THERMAL TESTING FOR THE EVALUATION OF SPACE MATERIALS, PROCESSES, MECHANICAL PARTS AND ASSEMBLIES |
| BS EN 16602-70-57:2015 | Space product assurance. Dry Heat Bioburden Reduction for Flight Hardware |
| BS EN 16602-60:2015 | Space product assurance. Electrical, electronic and electromechanical (EEE) components |
| I.S. EN 16603-10:2018 | SPACE ENGINEERING - SYSTEM ENGINEERING GENERAL REQUIREMENTS |
| DIN EN 16601-40 E : 2014 | SPACE PROJECT MANAGEMENT - PART 40: CONFIGURATION AND INFORMATION MANAGEMENT |
| BS EN 16602-70-45:2014 | Space product assurance. Mechanical testing of metallic materials |
| BS EN 16603-70:2015 | Space engineering. Ground systems and operations |
| 13/30291492 DC : 0 | BS EN 16602-70-20 - SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF SILVER-PLATED COPPER WIRE AND CABLE TO 'RED-PLAGUE' CORROSION |
| BS EN 16602-70-04:2014 | Space product assurance. Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies |
| I.S. EN 16602-70-08:2015 | SPACE PRODUCT ASSURANCE - MANUAL SOLDERING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
| I.S. EN 16602-70-26:2014 | SPACE PRODUCT ASSURANCE - CRIMPING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
| BS EN 16602-70-01:2014 | Space product assurance. Cleanliness and contamination control |
| 16/30349968 DC : 0 | BS EN 16602-80 - SPACE PRODUCT ASSURANCE - SOFTWARE PRODUCT ASSURANCE |
| I.S. EN 16602-70-45:2014 | SPACE PRODUCT ASSURANCE - MECHANICAL TESTING OF METALLIC MATERIALS |
| I.S. EN 16602-60-15:2014 | SPACE PRODUCT ASSURANCE - RADIATION HARDNESS ASSURANCE - EEE COMPONENTS |
| I.S. EN 16602-70:2016 | SPACE PRODUCT ASSURANCE - MATERIALS, MECHANICAL PARTS AND PROCESSES |
| I.S. EN 16602-70-28:2014 | SPACE PRODUCT ASSURANCE - REPAIR AND MODIFICATION OF PRINTED CIRCUIT BOARD ASSEMBLIES FOR SPACE USE |
| I.S. EN 16602-20:2014 | SPACE PRODUCT ASSURANCE - QUALITY ASSURANCE |
| EN 16602-20:2014 | Space product assurance - Quality assurance |
| EN 16602-20-07:2016 | Space product assurance - Quality and safety assurance for space test centres |
| EN 16602-70-04:2014 | Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies |
| EN 16602-20-08:2016 | Space product assurance - Storage, handling and transportation of spacecraft hardware |
| EN 16602-70-07:2014 | Space product assurance - Verification and approval of automatic machine wave soldering |
| EN 16603-70:2015 | Space engineering - Ground systems and operations |
| EN 16602-70-09:2015 | Space product assurance - Measurements of thermo-optical properties of thermal control materials |
| EN 16602-70-20:2014 | Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion |
| EN 16602-70-18:2014 | Space product assurance - Preparation, assembly and mounting of RF coaxial cables |
| EN 16602-70-29:2014 | Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| EN 16602-70-57:2015 | Space product assurance - Dry Heat Bioburden Reduction for Flight Hardware |
| EN 16602-70-58:2015 | Space product assurance - Bioburden control of cleanrooms |
| EN 16602-70-21:2014 | Space product assurance - Flammability testing for the screening of space materials |
| EN 16602-70-31:2014 | Space product assurance - Application of paints and coatings on space hardware |
| EN 16602-70-05:2014 | Space product assurance - Detection of organic contamination surfaces by infrared spectroscopy |
| EN 16602-70-10:2015 | Space product assurance - Qualification of printed circuit boards |
| EN 16602-70-28:2014 | Space product assurance - Repair and modification of printed circuit board assemblies for space use |
| EN 16602-70-02:2014 | Space product assurance - Thermal vacuum outgassing test for the screening of space materials |
| EN 16602-60-15:2014 | Space product assurance - Radiation hardness assurance - EEE components |
| EN 16602-30-02:2014 | Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA) |
| EN 16602-70-06:2014 | Space product assurance - Particle and UV radiation testing for space materials |
| EN 16602-70-56:2015 | Space product assurance - Vapour Phase Bioburden Reduction for Flight Hardware |
| EN 16603-10-03:2014 | Space engineering - Testing |
| EN 16602-70-22:2014 | Space product assurance - Control of limited shelf-life materials |
| EN 16602-70-01:2014 | Space product assurance - Cleanliness and contamination control |
| EN 16603-20-08:2014 | Space engineering - Part 20-08: Photovoltaic assemblies and components |
| EN 16602-70-13:2015 | Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
| EN 16602-70-08:2015 | Space product assurance - Manual soldering of high-reliability electrical connections |
| EN 16602-70-45:2014 | Space product assurance - Mechanical testing of metallic materials |
| I.S. EN 16602-70-06:2014 | SPACE PRODUCT ASSURANCE - PARTICLE AND UV RADIATION TESTING FOR SPACE MATERIALS |
| BS EN 16601-40:2014 | Space project management Configuration and information management |
| I.S. EN 16602-70-56:2015 | SPACE PRODUCT ASSURANCE - VAPOUR PHASE BIOBURDEN REDUCTION FOR FLIGHT HARDWARE |
| BS EN 16602-70:2016 | Space product assurance. Materials, mechanical parts and processes |
| BS EN 16602-10:2017 | Space product assurance. Product assurance management |
| I.S. EN 16602-70-07:2014 | SPACE PRODUCT ASSURANCE - VERIFICATION AND APPROVAL OF AUTOMATIC MACHINE WAVE SOLDERING |
| I.S. EN 16602-70-13:2015 | SPACE PRODUCT ASSURANCE - MEASUREMENTS OF THE PEEL AND PULL-OFF STRENGTH OF COATINGS AND FINISHES USING PRESSURE-SENSITIVE TAPES |
| BS EN 16602-70-05:2014 | Space product assurance. Detection of organic contamination surfaces by infrared spectroscopy |
| I.S. EN 16602-70-09:2015 | SPACE PRODUCT ASSURANCE - MEASUREMENTS OF THERMO-OPTICAL PROPERTIES OF THERMAL CONTROL MATERIALS |
| PREN 16602-80 : DRAFT 2016 | SPACE PRODUCT ASSURANCE - SOFTWARE PRODUCT ASSURANCE |
| I.S. EN 16602-70-10:2015 | SPACE PRODUCT ASSURANCE - QUALIFICATION OF PRINTED CIRCUIT BOARDS |
| I.S. EN 16602-70-05:2014 | SPACE PRODUCT ASSURANCE - DETECTION OF ORGANIC CONTAMINATION SURFACES BY INFRARED SPECTROSCOPY |
| I.S. EN 16602-70-21:2014 | SPACE PRODUCT ASSURANCE - FLAMMABILITY TESTING FOR THE SCREENING OF SPACE MATERIALS |
| 16/30341759 DC : 0 | BS EN 16602-70-54 - SPACE PRODUCT ASSURANCE - ULTRACLEANING OF FLIGHT HARDWARE |
| EN 16602-70:2016 | Space product assurance - Materials, mechanical parts and processes |
| EN 16601-40:2014 | Space project management - Configuration and information management |
| EN 16602-10:2017 | Space product assurance - Product assurance management |
| EN 16603-32-01:2014 | Space engineering - Fracture control |
| EN 16601-10:2015 | Space project management - Project planning and implementation |
| EN 16601-00-01:2015 | Space systems - Glossary of terms |
| EN 16602-20:2014 | Space product assurance - Quality assurance |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.