Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 16798-17:2017

Current
Current

The latest, up-to-date edition.

Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
Published date

07-06-2017

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Description of the inspection procedures
6 Method 1 - Ventilation-only systems
7 Method 2 - Air conditioning systems
8 Inspection report
9 Quality control
Annex A (normative) - Input and method selection
        data sheet - Template
Annex B (informative) - Input and method selection
        data sheet - Default choices
Bibliography

This European Standard specifies the common methodology and the requirements for inspection of air conditioning systems in buildings for space cooling and/or heating and/or ventilation systems from an energy use standpoint. It can be used to fulfil the EPBD requirements (Energy Performance of Buildings Directive 2010/31/EU [9]) as well as in other contexts where such inspections are specified. The methodology specified in this standard deals with indoor climate problems that can be due to the systems inspected.This standard applies to both residential and non-residential buildings equipped with:-air conditioning system(s) without mechanical ventilation; or-air conditioning system(s) with mechanical ventilation; or-natural and mechanical ventilation system(s).This standard applies to:-fixed systems;-accessible parts that contribute to the cooling and mechanical ventilation services.This standard is also applicable to some systems for which the Directive does not require inspection, such as:-fixed systems of less than 12 kW output;-ventilation-only systems.The inspection of systems given in this standard is applicable to:-all types of comfort cooling and air conditioning systems. This includes air conditioning systems of an effective rated output of less than 12 kW not covered by Directive 2010/31/EU;-all types of ventilation systems that is to say mechanical, natural, hybrid (including mechanical and natural ventilation). Parts of this standard are also applicable to check ventilation requirements when there is no ventilation system.The inspection of systems includes but is not limited to the following components:-reverse-cycle operation of air-conditioning equipment;-associated water and air distribution and exhaust systems that form a necessary part of the system;-controls that are intended to regulate the use of associated water and air distribution and exhaust systems.Table 1 shows the relative position of this standard within the offset of EPB standards in the context of the modular structure as set out in EN ISO 52000 1:2017.NOTE 1In CEN ISO/TR 52000 2:2017 [7] the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.NOTE 2The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2, Table A.1 and Table B.1.This standard is not applicable to:-qualification of the persons or organization in charge of inspections;-frequency of the mandatory inspection (defined at national level);-components supporting the heating function (specified in EN 15378-1:2017 [8] and the accompanying technical report CEN/TR 15378-2:2017 [8] covering the inspection of heating-only systems using boilers).The following information can be found in other standards or technical reports:-guidance regarding features affecting the frequency and duration of inspection are given in CEN/TR 16798-18:2017;-procedures and methods for the inspection of boilers and heating systems are given in prEN 15378 (all parts) [8].Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1:2017.

Committee
CEN/TC 156
DevelopmentNote
Supersedes PREN 16798-17, EN 15240 and EN 15239. (06/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

15/30325699 DC : 0 BS EN ISO 52000-1 - ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1: GENERAL FRAMEWORK AND PROCEDURES
S.R. CEN/TR 16798-4:2017 ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4)
I.S. EN ISO 52000-1:2017 ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1 - GENERAL FRAMEWORK AND PROCEDURES (ISO 52000-1:2017)
PD CEN/TR 16798-4:2017 Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)
S.R. CEN/TR 16798-18:2017 ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS PART 18: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-17 - GUIDELINES FOR INSPECTION OF VENTILATION AND AIR-CONDITIONING SYSTEMS (MODULES M4-11, M5-11, M6-11, M7-11)
EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
PD CEN/TR 16798-18:2017 Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-17. Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)
CEN/TR 16798-4:2017 Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)
CEN/TR 16798-18:2017 Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)
ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures

EN 1886:2007 Ventilation for buildings - Air handling units - Mechanical performance
CEN/TS 16629:2014 Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards
CEN/TS 16628:2014 Energy Performance of Buildings - Basic Principles for the set of EPB standards
CEN ISO/TR 52000-2:2017 Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017)
EN 15240:2007 Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems
CEN/TR 16798-18:2017 Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN 16798-17 - Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)
EN 12792:2003 Ventilation for buildings - Symbols, terminology and graphical symbols
ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
EN 12599:2012 Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems
EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
EN 15780:2011 Ventilation for buildings - Ductwork - Cleanliness of ventilation systems
EN 15232:2012 Energy performance of buildings - Impact of Building Automation, Controls and Building Management
EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
ISO/TR 52000-2:2017 Energy performance of buildings Overarching EPB assessment Part 2: Explanation and justification of ISO 52000-1
EN 16798-3:2017 Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
EN 15239:2007 Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems
EN 14134:2004 Ventilation for buildings - Performance testing and installation checks of residential ventilation systems
EN 15255:2007 Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures
ISO 7345:1987 Thermal insulation Physical quantities and definitions
EN 12097:2006 Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more