EN 1710:2005+A1:2008/AC:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
01-12-2016
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for equipment (machines) and components
4.1 General
4.2 Non-electrical equipment and components
4.3 Electrical equipment and components
4.3.1 General
4.3.2 Electrical equipment protection
4.3.3 Overcurrent protection
4.3.4 Earth-fault protection
4.3.5 Mechanical protection of live parts
5 Additional requirements for specific equipment
and components
5.1 Cutting and stripping equipment
5.1.1 General
5.1.2 Machines with cutting picks
5.1.3 Stripping machines
5.2 Rope haulages for level and inclined transport
5.3 Fans
5.3.1 Ventilating fans for use underground
5.3.2 Other fans
5.4 Diesel engines
5.5 Air compressors
5.6 Drilling equipment and components
5.7 Brakes
5.8 Traction batteries, starter batteries and
vehicle lighting batteries
5.9 Optical fibres used on machines and electromagnetic
radiation from components on machines
6 Fire protection
6.1 General
6.2 Non-metallic materials
6.3 Internal combustion engines fitted to machines
6.4 Hydraulic and pneumatic equipment
6.5 Additional requirements for cable-reeled machines
6.6 Fire prevention on electric cables that are part
of the machine
6.7 Conveyor belting
7 Information for use
7.1 Signals and warning notices
7.2 User instructions
7.2.1 General
7.2.2 Information on use
7.2.3 Information on maintenance and repair
7.3 Marking
Annex A (informative) Example of an ignition hazard assessment
for a conveyor belt intended for use in coal mine
assessment for a conveyor belt intended for
use in coal mine
A.1 General
A.2 Category and intended use of equipment
A.3 Construction/description of the equipment
A.4 Assessment
Annex B (informative) Examples of an ignition hazard
assessment for a shearer loader intended for
use in a potentially explosive atmosphere
of a coal mine
B.1 General
B.2 Category and intended use of equipment
B.3 Construction/description of the equipment
with regard to ignition protection
B.4 Ignition control and monitoring system
B.5 Compliance with the basic methodology
and requirements in EN 13463-1
B.6 Ignition hazard assessment of the electrical
parts of the equipment
B.7 Ignition hazard assessment of non-electrical
ignition sources
B.8 Equipment marking
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 94/9/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZC (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Describes the explosion protection requirements for the construction and marking of equipment that may be an individual item or form an assembly.
Committee |
TC 305
|
DevelopmentNote |
2005 Edition Re-Issued in April 2008 & incorporates AMD 1 2008. (05/2008)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PN EN 1710 : 2007 AC 2011 | Identical |
NBN EN 1710 : 2006 COR 2010 | Identical |
UNI EN 1710 : 2008 | Identical |
DIN EN 1710:2008-08 | Identical |
NS EN 1710 : 2005 AC 2010 | Identical |
UNE-EN 1710:2006 | Identical |
GOST R EN 1710 : 2009 | Identical |
SN EN 1710 : 2005 CORR 2010 | Identical |
NF EN 1710 : 2006 + A1 2008 | Identical |
BS EN 1710 : 2005 | Identical |
NEN EN 1710 : 2006 + A1/C1 2010 | Identical |
I.S. EN 1710:2005 | Identical |
BS EN 1710:2005+A1:2008 | Identical |
09/30198043 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
07/30163456 DC : 0 | BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
04/30115503 DC : DRAFT JUN 2004 | EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
I.S. EN 14973:2015 | CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
UNE-EN 1127-1:2012 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
BS EN 14983:2007 | Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage |
DIN EN 1127-2:2002-07 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
EN 16191:2014 | Tunnelling machinery - Safety requirements |
I.S. EN 13463-5:2011 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
EN 474-1:2006+A5:2018 | Earth-moving machinery - Safety - Part 1: General requirements |
UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
12/30270980 DC : 0 | BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
PREN 14986 : DRAFT 2014 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
DIN EN 14983 E : 2007 | EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - EQUIPMENT AND PROTECTIVE SYSTEMS FOR FIREDAMP DRAINAGE |
DIN EN 15198 E : 2007 | METHODOLOGY FOR THE RISK ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
DIN EN 1127-1:2011-10 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
I.S. EN 1127-2:2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
DIN EN 13463-5:2011-10 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
DIN EN 13463-5:2004-03 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
I.S. EN 14986:2017 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
09/30199364 DC : 0 | BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
DIN EN 14973 E : 2016 | CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
14/30294092 DC : 0 | BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
05/30131803 DC : DRAFT APR 2005 | EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
BS EN 14973:2015 | Conveyor belts for use in underground installations. Electrical and flammability safety requirements |
I.S. EN 474-1:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
I.S. EN 1127-1:2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
DIN EN 1127-2:2014-09 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
DIN EN 15198:2007-11 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
UNE-EN 13463-5:2013 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
UNI EN 13463-5 : 2011 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
UNI EN 1127-2 : 2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
BS EN 474-1 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
DIN EN 14973:2016-02 | CONVEYOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS |
I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
BS EN 1127-1:2019 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
BS EN 474-1:2006+A6:2019 | Earth-moving machinery. Safety General requirements |
BS EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\' |
UNE-EN 14973:2016 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
UNE-EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
BS EN 1127-2:2014 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining |
EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
EN 15198:2007 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
EN 14983:2007 | Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
EN 14973:2015 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
12/30243459 DC : 0 | BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH' |
PREN 13463-5 : DRAFT 2009 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
UNI EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
PREN 1127-2 : DRAFT 2012 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
DIN EN 474-1:2014-03 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
BS EN 15198:2007 | Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
DIN EN 14983:2007-06 | Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
ISO 5598:2008 | Fluid power systems and components Vocabulary |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
EN 1834-2:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
IEC 60332-1-3:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for determination of flamingdroplets/particles |
EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
EN ISO 340:2013 | Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013) |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
EN 12321:2003+A1:2009 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
EN 60332-1-2:2004/A11:2016 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015) |
EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
ISO 340:2013 | Conveyor belts Laboratory scale flammability characteristics Requirements and test method |
IEC 60332-1-1:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulatedwire or cable - Apparatus |
IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
ISO 4952:2006 | Structural steels with improved atmospheric corrosion resistance |
EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
EN 1804-3:2006+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
EN 60332-1-1:2004/A1:2015 | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
EN 60079-25:2010/AC:2013 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN 1554:2012 | Conveyor belts - Drum friction testing |
IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 2878:2017 | Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance |
EN ISO 12100-2:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN 12881-2:2005+A1:2008 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
EN 1552 : 2003 | UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity |
EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
EN 50303:2000 | Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
EN 60332-1-3:2004/A1:2015 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES (IEC 60332-1-3:2004/A1:2015) |
ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.