EN 1863-1:2011
Current
Current
The latest, up-to-date edition.
Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
Published date
30-11-2011
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Glass products
5 Fracture characteristics
6 Dimensions and tolerances
7 Edge and/or surface work, holes,
notches and cut-outs
8 Fragmentation test
9 Other physical characteristics
10 Marking
Annex A (informative) - Alternative method
for the measurement of roller
wave distortion
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat strengthened soda lime silicate glass of nominal thicknesses from 3 mm to 12 mm for use in buildings.Information on curved heat strengthened soda lime silicate glass is given in Annex A, but this product does not form part of this standard.Other requirements, not specified in this standard, can apply to heat strengthened soda lime silicate glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat strengthened soda lime silicate glass, in this case, does not lose its mechanical or thermal characteristics.This European Standard does not cover glass sandblasted after toughening.
| Committee |
CEN/TC 129
|
| DevelopmentNote |
Supersedes PREN 1863-1. (12/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 1863-1 : 2012 | Identical |
| BS EN 1863-1:2011 | Identical |
| I.S. EN 1863-1:2011 | Identical |
| NF EN 1863-1 : 2012 | Identical |
| NS EN 1863-1 : 2011 | Identical |
| NEN EN 1863-1 : 2011 | Identical |
| PN EN 1863-1 : 2012 | Identical |
| UNE-EN 1863-1:2012 | Identical |
| SN EN 1863-1 : 2011 | Identical |
| DIN EN 1863-1:2012-02 | Identical |
| UNI EN 1863-1 : 2012 | Identical |
| UNI EN 15755-1 : 2015 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS |
| 17/30356436 DC : 0 | BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
| UNI EN 1279-5 : 2010 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| BS EN 1279-1:2004 | Glass in building. Insulating glass units Generalities, dimensional tolerances and rules for the system description |
| NF EN 12758 : 2011 | GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES |
| DIN EN 1096-4:2015-06 (Draft) | GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| I.S. EN 12758:2011 | GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES |
| BS EN 12758:2011 | Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties |
| BS EN 1096-1:2012 | Glass in building. Coated glass Definitions and classification |
| BS EN 357:2004 | Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance |
| DIN EN 16477-1:2017-07 | GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| 08/30173305 DC : DRAFT JAN 2008 | BS EN 15755-1 - GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND DESCRIPTION |
| 12/30255284 DC : DRAFT APR 2012 | BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD |
| I.S. EN 1096-4:2004 | GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| I.S. EN 1279-1:2004 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION |
| PREN 14449 : DRAFT 2017 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD |
| EN 1096-4:2004 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard |
| EN 13031-1:2001 | GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES |
| DIN EN 1279-5:2015-08 (Draft) | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| DIN EN 14449:2005-07 | Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard |
| DIN EN 12758:2011-04 | GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES |
| I.S. EN 357:2004 | GLASS IN BUILDING - FIRE RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE |
| I.S. EN 1096-1:2012 | GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION |
| EN 1279-5:2005+A2:2010 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| UNE-EN 16477-1:2017 | Glass in building - Painted glass for internal use - Part 1: Requirements |
| I.S. EN 16477-1:2016 | GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS |
| NF EN 1279-5 : 2005 + A2 2010 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| BS EN 1096-4:2004 | Glass in building. Coated glass Evaluation of conformity/Product standard |
| I.S. EN 1279-5:2005 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| UNE-EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| I.S. EN 13031-1:2002 | GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES |
| DIN EN 1863-2:2005-01 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004 |
| DIN EN 14449 E : 2005 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY - PRODUCT STANDARD |
| EN 14449:2005/AC:2005 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| UNI EN 14449 : 2005 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| UNI EN 12758 : 2011 | GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES |
| UNI EN 1096-1 : 2012 | Glass in building - Coated glass - Part 1: Definitions and classification |
| EN 1279-1:2004/AC:2006 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION |
| BS EN 16477-1:2016 | Glass in building. Painted glass for internal use Requirements |
| 08/30170590 DC : DRAFT JULY 2008 | BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS |
| 17/30351893 DC : 0 | BS EN 17074 - GLASS IN BUILDING - ENVIRONMENTAL PRODUCT DECLARATION - PRODUCT CATEGORY RULES FOR FLAT GLASS PRODUCTS |
| 13/30281354 DC : 0 | BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LOAD RESISTANCE OF GLASS PANES BY CALCULATION AND TESTING |
| BS EN 15755-1:2014 | Glass in building. Adhesive backed polymeric filmed glass Definitions and requirements |
| UNE-EN 15755-1:2015 | Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements |
| DIN EN 1288-1:2000-09 | GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 1: FUNDAMENTALS OF TESTING GLASS |
| DIN EN 13031-1:2003-09 | GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES |
| BS EN 1863-2:2004 | Glass in building. Heat strengthened soda lime silicate glass Evaluation of conformity. Product standard |
| UNE-EN 1096-1:2012 | Glass in building - Coated glass - Part 1: Definitions and classification |
| BS EN 1288-1:2000 | Glass in building. Determination of the bending strength of glass Fundamentals of testing glass |
| BS EN 14449:2005 | Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard |
| BS EN 13031-1:2001 | Greenhouses. Design and construction Commercial production greenhouses |
| EN 357:2004 | Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
| EN 15755-1 : 2014 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS |
| EN 1863-2:2004 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
| EN 16477-1:2016 | Glass in building - Painted glass for internal use - Part 1: Requirements |
| PREN 1096-1 : DRAFT 2011 | GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION |
| DIN EN 15755-1:2014-10 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS |
| 08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
| 11/30244795 DC : 0 | BS EN 1096-1 - GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION |
| DIN EN 16477-1 E : 2017 | GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS |
| 07/30046980 DC : DRAFT AUG 2007 | BS ISO 1288-1 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 1: FUNDAMENTALS OF TESTING GLASS |
| 08/30170610 DC : DRAFT OCT 2008 | BS EN ISO 12543-5 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 5: DIMENSIONS AND EDGE FINISHING |
| BS EN 1279-5 : 2005 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| PREN 16612 : DRAFT 2017 | GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
| DIN EN 1279-1:2015-08 (Draft) | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION |
| I.S. EN 15755-1:2014 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 16477-1:2016-07 (Draft) | GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS |
| DIN EN 1096-1:2012-04 | Glass in building - Coated glass - Part 1: Definitions and classification |
| BS EN 12600:2002 | Glass in building. Pendulum test. Impact test method and classification for flat glass |
| EN 1096-1:2012 | Glass in building - Coated glass - Part 1: Definitions and classification |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
| DIN EN 357:2005-02 | GLASS IN BUILDING - FIRE-RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE |
| EN 1288-1:2000 | Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass |
| UNE-EN 1279-5:2006 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| EN 1096-1:2012 | Glass in building - Coated glass - Part 1: Definitions and classification |
| EN 1288-3:2000 | Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending) |
| EN 572-2:2012 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
| EN 572-4:2012 | Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass |
| EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
| EN 572-5:2012 | Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass |
| EN 572-8:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.