EN 1990:2002/A1:2005/AC:2010
Current
Current
The latest, up-to-date edition.
EUROCODE - BASIS OF STRUCTURAL DESIGN
Published date
21-04-2010
Publisher
FOREWORD
BACKGROUND OF THE EUROCODE PROGRAMME
STATUS AND FIELD OF APPLICATION OF EUROCODES
NATIONAL STANDARDS IMPLEMENTING EUROCODES
LINKS BETWEEN EUROCODES AND HARMONISED TECHNICAL
SPECIFICATIONS (ENs AND ETAs) FOR PRODUCTS
ADDITIONAL INFORMATION SPECIFIC TO EN 1990
NATIONAL ANNEX FOR EN 1990
SECTION 1 - GENERAL
1.1 SCOPE
1.2 NORMATIVE REFERENCES
1.3 ASSUMPTIONS
1.4 DISTINCTION BETWEEN PRINCIPLES AND APPLICATION RULES
1.5 TERMS AND DEFINITIONS
1.6 SYMBOLS
SECTION 2 - REQUIREMENTS
2.1 BASIC REQUIREMENTS
2.2 RELIABILITY MANAGEMENT
2.3 DESIGN WORKING LIFE
2.4 DURABILITY
2.5 QUALITY MANAGEMENT
SECTION 3 - PRINCIPLES OF LIMIT STATES DESIGN
3.1 GENERAL
3.2 DESIGN SITUATIONS
3.3 ULTIMATE LIMIT STATES
3.4 SERVICEABILITY LIMIT STATES
3.5 LIMIT STATE DESIGN
SECTION 4 - BASIC VARIABLES
4.1 ACTIONS AND ENVIRONMENTAL INFLUENCES
4.2 MATERIAL AND PRODUCT PROPERTIES
4.3 GEOMETRICAL DATA
SECTION 5 - STRUCTURAL ANALYSIS AND DESIGN ASSISTED BY
TESTING
5.1 STRUCTURAL ANALYSIS
5.2 DESIGN ASSISTED BY TESTING
SECTION 6 - VERIFICATION BY THE PARTIAL FACTOR METHOD
6.1 GENERAL
6.2 LIMITATIONS
6.3 DESIGN VALUES
6.4 ULTIMATE LIMIT STATES
6.5 SERVICEABILITY LIMIT STATES
ANNEX A1 (NORMATIVE) - APPLICATION FOR BUILDINGS
A1.1 FIELD OF APPLICATION
A1.2 COMBINATIONS OF ACTIONS
A1.3 ULTIMATE LIMIT STATES
A1.4 SERVICEABILITY LIMIT STATES
ANNEX A2 (NORMATIVE) - APPLICATION FOR BRIDGES
National Annex for EN 1990 Annex A2
A2.1 FIELD OF APPLICATION
A2.2 COMBINATIONS OF ACTIONS
A2.3 ULTIMATE LIMIT STATES
A2.4 SERVICEABILITY AND OTHER SPECIFIC LIMIT STATES
ANNEX B (INFORMATIVE) - MANAGEMENT OF STRUCTURAL
RELIABILITY FOR CONSTRUCTION WORKS
B1 SCOPE AND FIELD OF APPLICATION
B2 SYMBOLS
B3 RELIABILITY DIFFERENTIATION
B4 DESIGN SUPERVISION DIFFERENTIATION
B5 INSPECTION DURING EXECUTION
B6 PARTIAL FACTORS FOR RESISTANCE PROPERTIES
ANNEX C (INFORMATIVE) - BASIS FOR PARTIAL FACTOR DESIGN
AND RELIABILITY ANALYSIS
C1 SCOPE AND FIELD OF APPLICATIONS
C2 SYMBOLS
C3 INTRODUCTION
C4 OVERVIEW OF RELIABILITY METHODS
C5 RELIABILITY INDEX BETA
C6 TARGET VALUES OF RELIABILITY INDEX BETA
C7 APPROACH FOR CALIBRATION OF DESIGN VALUES
C8 RELIABILITY VERIFICATION FORMATS IN EUROCODES
C9 PARTIAL FACTORS IN EN 1990
C10 PSI[0] FACTORS
ANNEX D (INFORMATIVE) - DESIGN ASSISTED BY TESTING
D1 SCOPE AND FIELD OF APPLICATION
D2 SYMBOLS
D3 TYPES OF TESTS
D4 PLANNING OF TESTS
D5 DERIVATION OF DESIGN VALUES
D6 GENERAL PRINCIPLES FOR STATISTICAL EVALUATIONS
D7 STATISTICAL DETERMINATION OF A SINGLE PROPERTY
D8 STATISTICAL DETERMINATION OF RESISTANCE MODELS
BIBLIOGRAPHY
ANNEX A2 (NORMATIVE) - APPLICATION FOR BRIDGES
National Annex for EN 1990 Annex A2
A2.1 FIELD OF APPLICATION
A2.2 COMBINATIONS OF ACTIONS
A2.3 ULTIMATE LIMIT STATES
A2.4 SERVICEABILITY AND OTHER SPECIFIC LIMIT STATES
Describes Principles and requirements for the safety, serviceability and durability of structures, describes the basis for their design and verification and gives guidelines for related aspects of structural reliability.
| Committee |
CEN/TC 250
|
| DevelopmentNote |
Supersedes ENV 1991-1 (09/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DS EN 1990 : 2007 COR 2010 | Identical |
| UNE-EN 1990:2003/A1:2010 | Identical |
| UNE-EN 1990:2003 | Identical |
| NBN EN 1990 : 2002 + A1 2015 | Identical |
| BS EN 1990:2002+A1:2005 | Identical |
| NF EN 1990 : 2003 AMD 1 2006 | Identical |
| I.S. EN 1990:2002 | Identical |
| SN EN 1990 : 2002 AMD 1 2006 | Identical |
| DIN EN 1990:2010-12 | Identical |
| NS EN 1990 : 2002 + NA 2016 | Identical |
| UNE-EN 1990:2019 | Identical |
| PN EN 1990 : 2004 NA 2010 | Identical |
| UNI EN 1990 : 2006 | Identical |
| NEN EN 1990 : 2011 | Identical |
| I.S. EN 13121-3:2016 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| PREN 13830 : DRAFT 2013 | CURTAIN WALLING - PRODUCT STANDARD |
| UNE-EN 50341-1:2017 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
| 04/19988807 DC : DRAFT AUG 2004 | BS EN 14991 - PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
| BS EN 50119 : 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| 08/30192726 DC : 0 | BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| 11/30247279 DC : 0 | BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL |
| 13/30279623 DC : 0 | BS EN 16582-2 - DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENT INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| I.S. EN 1998-3:2005 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 3: ASSESSMENT AND RETROFITTING OF BUILDINGS |
| I.S. EN 1996-1-2:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 1995-2:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 2: BRIDGES (INCLUDING IRISH NATIONAL ANNEX) |
| 14/30266573 DC : 0 | BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| I.S. EN 1991-1-4:2005 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS (INCLUDING IRISH NATIONAL ANNEX) |
| 16/30292774 DC : 0 | BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| 10/30228230 DC : 0 | BS EN 13001-2 - CRANES - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| PREN 14199 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNI EN 15037-1 : 2008 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS |
| UNI EN 15512 : 2009 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| I.S. EN 1993-6:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| 12/30248282 DC : 0 | BS EN 12811-4 - TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| DIN EN 1337-8 E : 2008 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| 13/30277116 DC : 0 | BS EN 12930 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
| 08/30152055 DC : DRAFT APR 2008 | BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| DIN EN 13001-3-2 E : 2015 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| UNE-EN 15129:2011 | Anti-seismic devices |
| 17/30349922 DC : 0 | BS EN 13791 - ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| 10/30193723 DC : 0 | BS ISO 11336-1 - LARGE YACHTS STRENGTH, WEATHERTIGHTNESS AND WATERTIGHTNESS OF GLAZED OPENINGS - PART 1: DESIGN CRITERIA, MATERIALS, FRAMING AND TESTING OF INDEPENDENT GLAZED OPENINGS |
| UNE-EN 1993-1-10:2013 | Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties |
| BS ISO 11336-1:2012 | Large yachts. Strength, weathertightness and watertightness of glazed openings Design criteria, materials, framing and testing of independent glazed openings |
| 10/30212171 DC : 0 | BS EN 15037-5 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK |
| BS EN 16927:2017 | Mini-pools. Specific requirements including safety and test methods for mini-pools |
| PREN 12368 : DRAFT 2014 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| 13/30280743 DC : 0 | BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| ACI SP 315 : 2017 | ACI/FIB INTERNATIONAL SYMPOSIUM ON PUNCHING SHEAR IN STRUCTURAL CONCRETE SLABS: HONORING NEIL M. HAWKINS |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| PREN 1536 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| DIN EN 15037-3:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011) |
| 07/30166420 DC : DRAFT AUG 2007 | BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
| DIN EN 15644 E : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 16/30322067 DC : 0 | BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| CEN/TR 16886 : 2016 | GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS |
| I.S. EN 50341-1:2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| PREN 13200-6 : DRAFT 2017 | SPECTATOR FACILITIES - PART 6: DEMOUNTABLE STANDS |
| BS EN 14490:2010 | Execution of special geotechnical works. Soil nailing |
| UNE-EN 1997-1:2016 | Eurocode 7: Geotechnical design - Part 1: General rules. |
| BS EN 16869:2017 | Design/construction of Via Ferratas |
| PREN 50119 : DRAFT 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 12871 : DRAFT 2011 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| DIN EN 1999-1-4:2010-05 | Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting; German version EN 1999-1-4:2007 + AC:2009 |
| DIN EN 16927 E : 2017 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| UNE-EN 1996-2:2011 | Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry |
| UNE-EN 1994-1-1:2013 | Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings |
| BS EN 13445-3 : 2014 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
| NORSOK N 001 : REV 8 | INTEGRITY OF OFFSHORE STRUCTURES |
| I.S. EN 15037-1:2008 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS |
| I.S. EN 16927:2017 | MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS |
| I.S. EN 15037-4:2010 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| I.S. EN 16582-2:2015 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| S.R. CEN TS 1992-4-1:2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| I.S. EN 16582-3:2015 | DOMESTIC SWIMMING POOLS - PART 3: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR ABOVEGROUND POOLS |
| I.S. EN 1999-1-2:2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN ISO 22282-1:2012 | GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES (ISO 22282-1:2012) |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications |
| I.S. EN 1993-4-1:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
| PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| UNI EN 15037-4 : 2013 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| UNI EN 1999-1-5 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| UNE-EN 1998-1:2011 | Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings |
| BS EN 13001-3-1 : 2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| UNE-EN 1992-1-2:2011 | Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design |
| UNE-EN 15512:2010 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
| DD CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete General |
| 13/30286967 DC : 0 | BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| UNI EN 13001-3-1 : 2013 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| 13/30281354 DC : 0 | BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LOAD RESISTANCE OF GLASS PANES BY CALCULATION AND TESTING |
| NF EN 1993-6/NA : 2011 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES - NATIONAL ANNEX TO NF EN 1993-6:2007 - CRANE SUPPORTING STRUCTURES |
| DIN EN 15129:2010-06 | ANTI-SEISMIC DEVICES |
| 17/30356436 DC : 0 | BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
| UNI EN 1090-1 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| EN 16869:2017/AC:2018 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
| ISO/TR 24679-3:2015 | Fire safety engineering Performance of structure in fire Part 3: Example of an open car park |
| EN 13445-3:2014/A4:2018 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
| I.S. EN 1993-1-10:2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES (INCLUDING IRISH NATIONAL ANNEX) |
| EN 1998-1:2004/A1:2013 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS |
| EN 1993-1-6:2007/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES |
| DIN EN 12368:2015-09 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| I.S. EN 1991-1-6:2005 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
| DIN EN 13500:2003-12 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION |
| DIN EN 1993-1-2:2010-12 | Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009) |
| DIN EN 14250 E : 2010 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| DIN EN 1994-1-1:2010-12 | Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009) |
| DIN EN 13499:2003-12 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003 |
| DIN EN 14879-1 E : 2005 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| DIN EN 1996-1-2:2011-04 | Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2010) |
| BS EN 14358:2016 | Timber structures. Calculation and verification of characteristic values |
| BS EN 13499:2003 | Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on expanded polystyrene. Specification |
| PD ISO/TS 20656-1:2017 | Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes Buried pipes |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| UNE-EN 13200-6:2013 | Spectator facilities - Part 6 : Demountable (temporary) stands |
| BS EN 1995-1-1 : 2012 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| BS EN 13451-1 : 2011 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 14731:2005 | Execution of special geotechnical works. Ground treatment by deep vibration |
| BS EN 1992-1-1 : 2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS EN 12811-2:2004 | Temporary works equipment Information on materials |
| BS EN 1991-1-7 : 2006 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS |
| BS EN ISO 19902 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| BS EN 1996-2:2006 | Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| BS EN 12699:2015 | Execution of special geotechnical works. Displacement piles |
| BS EN 1991-1-2:2002 | Eurocode 1. Actions on structures General actions. Actions on structures exposed to fire |
| BS EN 1998-2 : 2005 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| BS EN 1993-1-4 : 2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
| BS EN 1993-5:2007 | Eurocode 3. Design of steel structures Piling |
| DIN EN 1537:2001-01 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| I.S. EN 14358:2016 | TIMBER STRUCTURES - CALCULATION AND VERIFICATION OF CHARACTERISTIC VALUES |
| DIN EN 13084-2:2007-08 | Free-standing chimneys - Part 2: Concrete chimneys |
| I.S. EN 12699:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
| EN 13500:2003 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification |
| EN 12811-2:2004 | Temporary works equipment - Part 2: Information on materials |
| EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
| EN 1337-8:2007 | Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
| DIN EN 1993-6:2010-12 | Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009) |
| EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
| CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete - Part 4-1: General |
| I.S. EN 1998-2:2006 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| EN 13084-2:2007 | Free-standing chimneys - Part 2: Concrete chimneys |
| EN 13499:2003 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification |
| DIN EN 13830:2015-07 | CURTAIN WALLING - PRODUCT STANDARD |
| DIN EN 1992-3:2011-01 | Eurocode 2: Design of concrete structures - Part 3: Liquid retaining and containment structures; German version EN 1992-3:2006 |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 13224:2011 | Precast concrete products - Ribbed floor elements |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| DIN EN 1991-1-4:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| EN 12368:2015 | Traffic control equipment - Signal heads |
| DIN EN 12811-2:2004-04 | Temporary works equipment - Part 2: Information on materials; German version EN 12811-2:2004 |
| CEN/TR 15728:2016 | Design and use of inserts for lifting and handling of precast concrete elements |
| CEN/TR 1317-6 : 2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
| CEN/TR 14862:2004 | Precast concrete products - Full-scale testing requirements in standards on precast concrete products |
| DIN EN 1069-1:2017-11 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 15528:2015 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
| CEN/TS 13001-3-1:2004/AC:2006 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| EN 1337-4:2004/AC:2007 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
| EN 1337-5:2005 | Structural bearings - Part 5: Pot bearings |
| EN 12843 : 2004 | PRECAST CONCRETE PRODUCTS - MASTS AND POLES |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
| EN 12812:2008 | Falsework - Performance requirements and general design |
| EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| DIN EN 1998-4:2007-01 | Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines |
| VDI/BV-BS 6205 Blatt 1:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - General principles |
| VDI/BV-BS 6205 Blatt 2:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
| I.S. EN 1994-1-2:2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| DIN EN 16582-3 E : 2015 | DOMESTIC SWIMMING POOLS - PART 3: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR ABOVEGROUND POOLS |
| 09/30198700 DC : 0 | BS EN 15037-4 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| DIN EN 15898 E : 2011 | CONSERVATION OF CULTURAL PROPERTY - MAIN GENERAL TERMS AND DEFINITIONS |
| 17/30331222 DC : 0 | BS EN 16432-1 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENT |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN 1998-6:2005 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS |
| I.S. EN 1794-1:2018 | ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS |
| 10/30214897 DC : 0 | BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN EN 15898:2011-12 | CONSERVATION OF CULTURAL PROPERTY - MAIN GENERAL TERMS AND DEFINITIONS |
| ISO/TR 24679-6:2017 | Fire safety engineering Performance of structures in fire Part 6: Example of an eight-storey office concrete building |
| DIN EN 15037-4:2013-08 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| 15/30328805 DC : 0 | BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| I.S. EN 1991-1-2:2002 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
| I.S. EN 1993-5:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX) |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| BS EN 1090-1 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| I.S. EN 1991-1-5:2003 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS (INCLUDING IRISH NATIONAL ANNEX) |
| BS EN 50583-1:2016 | Photovoltaics in buildings BIPV modules |
| UNI EN 1794-1 : 2011 | ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS |
| 08/30178840 DC : DRAFT AUG 2008 | BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| BS EN 50583-2:2016 | Photovoltaics in buildings BIPV systems |
| UNI EN 15644 : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| I.S. EN 16869:2017 | DESIGN/CONSTRUCTION OF VIA FERRATAS |
| 04/19987163 DC : DRAFT OCT 2004 | EN 13200-6 - SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS |
| 12/30272145 DC : 0 | BS EN 16508 - TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| DIN EN 16582-1 E : 2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| 11/30215604 DC : 0 | BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| 04/30124987 DC : DRAFT NOV 2004 | EN 1090-1 - STEEL AND ALUMINIUM STRUCTURAL COMPONENTS - GENERAL DELIVERY CONDITIONS |
| PD ISO/TR 24679-6:2017 | Fire safety engineering. Performance of structures in fire Example of an eight-storey office concrete building |
| PD CEN/TR 16949:2016 | Road restraint system. Pedestrian restraint system. Pedestrian parapets |
| 04/30123649 DC : DRAFT OCT 2004 | EN 13200-5 - SPECTATOR FACILITIES - PART 5: TELESCOPIC STANDS |
| 17/30337809 DC : DRAFT JAN 2017 | BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| DIN EN 16481:2014-09 | TIMBER STAIRS - STRUCTURAL DESIGN |
| UNE-EN 1090-1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| 15/30321787 DC : 0 | BS EN 16869 - DESIGN/CONSTRUCTION OF VIA FERRATA |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 16582-3:2015-11 | DOMESTIC SWIMMING POOLS - PART 3: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR ABOVEGROUND POOLS |
| CEN/TR 16949:2016 | Road restraint system - Pedestrian restraint system - Pedestrian parapets |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| DIN EN 15037-1:2008-07 | Precast concrete products - Beam-and-block floor systems - Part 1: Beams |
| 12/30261638 DC : 0 | BS EN 13001-2 - CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| 13/30281348 DC : 0 | BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN ISO 22282-1:2012 | Geotechnical investigation and testing. Geohydraulic testing General rules |
| BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
| 15/30320413 DC : 0 | BS EN 16382 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-THROUGH RESISTANCE OF PLATE ANCHORS THROUGH THERMAL INSULATION PRODUCTS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 08/30123706 DC : DRAFT APR 2008 | ISO 22282-1 - GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES |
| UNI CEN/TS 1992-4-1 : 2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| PD CEN/TR 1295-4:2015 | Structural design of buried pipelines under various conditions of loading Parameters for reliability of the design |
| BS EN 1999-1-2:2007 | Eurocode 9. Design of aluminium structures Structural fire design |
| I.S. EN 16932-1:2018 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 13001-3-2:2014 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| PREN 13107 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| PREN 13001-2 : DRAFT 2012 | CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| UNI EN 15037-3 : 2011 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNI CEN/TR 1317-6 : 2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
| UNE-EN 1994-2:2013 | Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges |
| BS EN 15037-3 : 2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| ABS 0236 : 2016 | GUIDE FOR CERTIFICATION OF OFFSHORE ACCESS GANGWAYS |
| I.S. EN 1069-1:2017 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 12811-4:2013 | TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| BS EN 13369:2013 | Common rules for precast concrete products |
| I.S. EN 1993-1-6:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES |
| BS EN 1999-1-1 : 2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| I.S. EN 1999-1-1:2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX) |
| UNE-EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| BS EN 15129:2009 | Anti-seismic devices |
| EN 15129:2018 (edition 2) | Anti-seismic devices |
| 18/30365863 DC : 0 | BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL |
| UNI CEN/TR 15728 : 2010 | DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS |
| UNI EN 15129 : 2009 | ANTI-SEISMIC DEVICES |
| PREN 752 : DRAFT 2015 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
| UNE-EN 13374:2013 | Temporary edge protection systems - Product specification - Test methods |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 50119:2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| DIN EN 12843:2004-11 | Precast concrete products - Masts and poles |
| DIN EN 1537:2014-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| DIN EN 14991 E : 2007 | PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
| DIN EN 12699:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
| DIN EN 13200-6:2013-03 | SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS |
| DIN EN 12871:2013-09 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN 1993-4-3:2010-12 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES |
| DIN EN 13107:2015-09 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| DIN EN 1993-1-9:2010-12 | Eurocode 3: Design of steel structures - Part 1-9: Fatigue (includes Corrigendum AC:2009) |
| DIN EN 1538:2015-10 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| DIN EN 13084-8:2005-08 | FREE-STANDING INDUSTRIAL CHIMNEYS - PART 8: DESIGN AND EXECUTION OF MAST CONSTRUCTION WITH SATELLITE COMPONENTS |
| DIN EN 14199:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| DIN EN 1337-3:2005-07 | Structural bearings - Part 3: Elastomeric bearings |
| DIN EN 14475:2006-04 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| DIN EN 1995-1-2 E : 2010 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
| DIN EN 1995-1-1:2010-12 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008) |
| DIN EN 1337-6:2004-08 | Structural bearings - Part 6: Rocker bearings |
| DIN EN 1337-5:2005-07 | Structural bearings - Part 5: Pot bearings |
| DIN EN 14250:2010-05 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| BS EN 1993-1-10:2005 | Eurocode 3. Design of steel structures Material toughness and through-thickness properties |
| BS EN 12871:2013 | Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| BS EN 40-3-1:2013 | Lighting columns Design and verification. Specification for characteristic loads |
| BS EN 14991:2007 | Precast concrete products. Foundation elements |
| UNE-EN 13830:2016 | Curtain walling - Product standard |
| BS EN 1991-2:2003 | Eurocode 1. Actions on structures Traffic loads on bridges |
| BS EN 1991-3:2006 | Eurocode 1. Actions on structures Actions induced by cranes and machinery |
| BS EN 12368:2015 | Traffic control equipment. Signal heads |
| BS EN 1538 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DIAPHRAGM WALLS |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| BS EN 1995-2:2004 | Eurocode 5. Design of timber structures Bridges |
| BS EN 13200-6:2012 | Spectator facilities Demountable (temporary) stands |
| UNE-EN 40-3-2:2013 | Lighting columns - Part 3-2: Design and verification - Verification by testing |
| BS EN 1337-5:2005 | Structural bearings Pot bearings |
| DIN EN 752:2015-10 (Draft) | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| I.S. EN 13830:2015 | CURTAIN WALLING - PRODUCT STANDARD |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 13084-2:2007 | FREE-STANDING CHIMNEYS - PART 2: CONCRETE CHIMNEYS |
| I.S. EN 12368:2015 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| I.S. EN 1993-1-4:2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 1996-1-1:2013-02 | Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012) |
| I.S. EN 13451-1:2011 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| EN 15512:2009 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
| DIN EN 1993-1-6:2010-12 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES |
| I.S. EN ISO 19902:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| I.S. EN 1994-2:2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 1536:2015-10 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| I.S. EN 13693:2005 | PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
| I.S. EN 12812:2008 | FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| I.S. EN 13782:2015 | TEMPORARY STRUCTURES - TENTS - SAFETY |
| I.S. EN 13224:2011 | PRECAST CONCRETE PRODUCTS - RIBBED FLOOR ELEMENTS |
| I.S. EN 1991-1-3:2003 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 1993-4-3:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES |
| DIN EN 13084-1:2007-05 | Free-standing chimneys - Part 1: General requirements |
| I.S. EN 1994-1-1:2005 | EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 12871:2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| I.S. EN 13107:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| I.S. EN 14250:2010 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| I.S. EN 40-3-2:2013 | LIGHTING COLUMNS - PART 3-2: DESIGN AND VERIFICATION - VERIFICATION BY TESTING |
| I.S. EN 13084-1:2007 | FREE-STANDING CHIMNEYS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13121-3:2016-10 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| I.S. EN 1536:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| I.S. EN 40-3-1:2013 | LIGHTING COLUMNS - PART 3-1: DESIGN AND VERIFICATION - SPECIFICATION FOR CHARACTERISTIC LOADS |
| EN ISO 19902:2007/A1:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013) |
| I.S. EN 1537:2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| I.S. EN 12930:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
| I.S. EN 13001-2:2014 | CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS |
| I.S. EN 1996-1-1:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 1538:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| DIN EN 13374:2013-07 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| I.S. EN 14199:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| UNI EN 13693 : 2009 | PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
| VDI 4437:2017-07 | Pan conveyors for bulk material - Continuous conveyors survey |
| VDI 2038 Blatt 2:2013-01 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Shock and vibration - prognosis, measurement, evaluation and reduction measures |
| VDI 6012 Blatt 1.4:2016-01 | Integration of distributed and renewables-based energy systems in buildings - Fundamentals - Fixing of solar modules and solar collectors on buildings |
| DIN EN 16927:2017-05 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| VDI 2038 Blatt 1:2012-06 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Basics, methods, procedures and loads |
| VDI 6201 Blatt 1:2015-12 | Software-based structural analysis - Fundamentals, requirements, modeling |
| VDI 3813 Blatt 1:2011-05 | Building automation and control systems (BACS) - Fundamentals for room control |
| VDI/BV-BS 6206 Blatt 1:2015-06 | Buildings constructed with reusable pre-assembled room units in steel frame construction - Fundamentals |
| UNI CEN/TS 13001-3-2 : 2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| DIN EN 1999-1-1:2014-03 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| DIN EN 1337-8:2008-01 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| PD CEN/TR 1317-6:2012 | Road restraint systems Pedestrian restraint system. Pedestrian parapets |
| DIN EN 13670:2011-03 | Execution of concrete structures |
| UNE-EN 1992-1-1:2013 | Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings |
| I.S. EN 1991-3:2006 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| DIN EN 16432-1:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 11/30253904 DC : 0 | BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| BS EN 13670:2009 | Execution of concrete structures |
| 13/30254279 DC : 0 | BS ISO 16488 - MARINE FINFISH FARMS - OPEN NET CAGE - DESIGN AND OPERATION |
| I.S. EN 1996-3:2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 1999-1-5:2010-05 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN 1992-3:2006 | EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 3: LIQUID RETAINING AND CONTAINMENT STRUCTURES |
| 12/30265273 DC : DRAFT OCT 2012 | BS EN 13001-3-2 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| UNI EN 12811-4 : 2014 | TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. EN 1996-2:2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY (INCLUDING IRISH NATIONAL ANNEX) |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| UNE-EN 1996-1-2:2011 | Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design |
| 08/30192723 DC : 0 | BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| I.S. EN 1991-2:2003 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 13001-3-2:2015-10 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| BS EN 15037-1:2008 | Precast concrete products. Beam-and-block floor systems Beams |
| I.S. EN 1997-1:2005 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| UNI EN 15037-5 : 2013 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK |
| DIN EN 1090-5 E : 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| BS EN 1999-1-4 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| I.S. EN 15512:2009 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| BS EN 16582-1:2015 | Domestic swimming pools General requirements including safety and test methods |
| 13/30275585 DC : 0 | BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| UNE-EN 15528:2016 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
| UNE-EN 50583-2:2016 | Photovoltaics in buildings - Part 2: BIPV systems |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| 07/30161334 DC : 0 | BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 16/30340629 DC : 0 | BS EN 1794-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS |
| 13/30286097 DC : 0 | BS EN 14358 - TIMBER STRUCTURES - CALCULATION OF CHARACTERISTIC 5-PERCENTILE AND MEAN VALUES FOR THE PURPOSE OF INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN 16481 E : 2014 | TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS |
| 12/30266506 DC : 0 | BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS |
| PD CEN/TR 15728:2016 | Design and use of inserts for lifting and handling of precast concrete elements |
| ISO 3898:2013 | Bases for design of structures — Names and symbols of physical quantities and generic quantities |
| I.S. CEN TS 13001-3-2:2005 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| BS EN 1337-8:2007 | Structural bearings Guide bearings and restraint bearings |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PD ISO/TR 24679-3:2015 | Fire safety engineering. Performance of structure in fire Example of an open car park |
| BS PP1990(2004) : 2004 | GUIDE TO THE STRUCTURAL EUROCODES FOR STUDENTS OF STRUCTURAL DESIGN |
| 04/19988815 DC : DRAFT SEP 2004 | BS EN 15037-1 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS |
| UNI CEN/TS 13001-3-1 : 2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| EN 115-1:2017 | Safety of escalators and moving walks - Part 1: Construction and installation |
| 17/30320855 DC : 0 | BS EN 62938 ED 1.0 - NON-UNIFORM SNOW LOAD TESTING FOR PHOTOVOLTAIC (PV) MODULES |
| 08/30171944 DC : DRAFT JAN 2008 | BS EN 12812 - FALSE WORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 12930 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
| PD CEN/TR 14862:2004 | Precast concrete products. Full-scale testing requirements in standards on precast concrete products |
| PREN 17121 : DRAFT 2017 | CONSERVATION OF CULTURAL HERITAGE - HISTORIC TIMBER STRUCTURES - GUIDELINES FOR THE ON SITE ASSESSMENT |
| PREN 13495 : DRAFT 2017 | THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS)(FOAM BLOCK TEST) |
| 07/30172380 DC : 0 | BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| 03/314375 DC : DRAFT DEC 2003 | BS EN 14844 - PRECAST CONCRETE BOX CULVERTS |
| UNE-EN ISO 22282-1:2013 | Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012) |
| UNE-EN 13001-3-2:2015 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 1337-1 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 1: GENERAL |
| 17/30347025 DC : 0 | BS EN 15129 - ANTI-SEISMIC DEVICES |
| DIN EN 16432-1 E : 2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13001-3-1:2013-12 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| I.S. EN 115-1:2017 | SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| I.S. EN 13445-3:2014 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
| BS EN 13121-3:2016 | GRP tanks and vessels for use above ground Design and workmanship |
| BS PD6705-2(2010) : 2010 | STRUCTURAL USE OF STEEL AND ALUMINIUM - PART 2: RECOMMENDATIONS FOR THE EXECUTION OF STEEL BRIDGES TO BS EN 1090-2 |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 1794-1 : DRAFT 2016 | ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS |
| I.S. EN 16582-1:2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| I.S. EN 1337-8:2007 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| I.S. EN 16481:2014 | TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| PREN 12699 : DRAFT 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| DIN EN 1069-1:2015-09 (Draft) | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 1999-1-4:2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING (INCLUDING IRISH NATIONAL ANNEX) |
| CEI EN 50341-1 : 2013 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| UNE-EN 13121-3:2017 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| UNI EN 1999-1-4 : 2011 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| PREN 16759 : DRAFT 2014 | STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS) |
| UNE-EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| ISO 16488:2015 | Marine finfish farms Open net cage Design and operation |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 16932-1:2018 | Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| I.S. EN 15898:2011 | CONSERVATION OF CULTURAL PROPERTY - MAIN GENERAL TERMS AND DEFINITIONS |
| EN 1993-4-1:2007/A1:2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| I.S. EN 15644:2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| EN 1993-1-4:2006/A1:2015 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
| DIN EN 12812:2008-12 | FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| DIN EN 1993-1-4:2015-10 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
| DIN EN 1996-2:2010-12 | Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (includes Corrigendum AC:2009) |
| DIN EN 1996-3:2010-12 | Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009) |
| DIN EN 1337-4 E : 2004 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
| DIN EN 1997-1:2014-03 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| DIN EN 14731 E : 2005 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND TREATMENT BY DEEP VIBRATION |
| DIN EN 1991-1-2:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
| DIN EN 1337-3 E : 2005 | STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| DIN EN 1994-2:2010-12 | Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008) |
| DIN EN 13782:2015-06 | TEMPORARY STRUCTURE - TENTS - SAFETY |
| DIN EN 1337-5 E : 2005 | STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
| DIN EN 1991-1-6:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS, ACTIONS DURING EXECUTION |
| BS EN 13084-2:2007 | Free-standing chimneys Concrete chimneys |
| UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| BS EN 14475:2006 | Execution of special geotechnical works. Reinforced fill |
| UNE-EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| BS EN 1998-6:2005 | Eurocode 8. Design of structures for earthquake resistance Towers, masts and chimneys |
| BS EN 1993-4-3:2007 | Eurocode 3. Design of steel structures Pipelines |
| IEC TR 60865-2:2015 | Short-circuit currents - Calculation of effects - Part 2: Examples of calculation |
| BS EN 40-3-2:2013 | Lighting columns Design and verification. Verification by testing |
| DIN EN 1337-4:2004-08 | Structural bearings - Part 4: Roller bearings |
| UNE-EN 13224:2012 | Precast concrete products - Ribbed floor elements |
| EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
| EN 13200-6:2012 | Spectator facilities - Part 6 : Demountable (temporary) stands |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| EN 13830:2015 | Curtain walling - Product standard |
| UNI EN 13200-6 : 2013 | SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS |
| I.S. EN 13200-6:2012 | SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS |
| I.S. EN 1992-1-1:2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| UNE-EN 1991-1-3:2018 | Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads. |
| EN 1995-2:2004 | Eurocode 5: Design of timber structures - Part 2: Bridges |
| EN 1993-1-2:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 1993-5:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 1999-1-1:2007/A2:2013 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| UNI EN 1991-1-5 : 2004 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS |
| UNI EN 1991-1-1 : 2004 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
| UNI EN 14991 : 2007 | PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 1991-4 : 2006 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS |
| UNI EN 1537 : 2013 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS |
| UNI EN 1993-5 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| UNI EN 13374 : 2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| UNI EN 1991-1-6 : 2005 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
| UNI EN 1994-2 : 2006 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES |
| UNI EN 1996-2 : 2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| UNI EN 1995-1-2 : 2005 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
| UNI EN 1991-1-4 : 2010 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| UNI EN 1993-1-10 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES |
| UNI EN 40-3-2 : 2013 | LIGHTING COLUMNS - PART 3-2: DESIGN AND VERIFICATION - VERIFICATION BY TESTING |
| UNI EN 1992-3 : 2006 | EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 3: LIQUID RETAINING AND CONTAINMENT STRUCTURES |
| UNI EN 13224 : 2012 | PRECAST CONCRETE PRODUCTS - RIBBED FLOOR ELEMENTS |
| UNI EN 1994-1-2 : 2014 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNI EN 1993-4-3 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES |
| UNI EN 1520 : 2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
| UNI EN 1993-1-2 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 1992-1-2 : 2005 | EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNI EN 14250 : 2010 | TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| UNI EN 12871 : 2013 | WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS |
| UNI EN 1998-3 : 2005 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 3: ASSESSMENT AND RETROFITTING OF BUILDINGS |
| UNI EN 1996-1-2 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNI EN 1991-2 : 2005 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES |
| UNI EN 1993-6 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES |
| UNI EN 1997-2 : 2007 | EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING |
| UNI EN 12843 : 2005 | PRECAST CONCRETE PRODUCTS - MASTS AND POLES |
| UNI EN 12812 : 2008 | FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
| UNI EN 1999-1-2 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
| EN 15258:2008 | Precast concrete products - Retaining wall elements |
| UNI EN 1991-1-2 : 2004 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
| UNI EN 1994-1-1 : 2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| UNI EN 1991-3 : 2006 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| UNI EN 1998-2 : 2011 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| UNI EN 1997-1 : 2013 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| UNI EN 40-3-1 : 2013 | LIGHTING COLUMNS - PART 3-1: DESIGN AND VERIFICATION - SPECIFICATION FOR CHARACTERISTIC LOADS |
| UNI EN 1995-1-1 : 2014 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| UNI EN 14475 : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| UNI EN 1991-1-7 : 2014 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS |
| UNI EN 1996-1-1 : 2013 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS EN 16481:2014 | Timber stairs. Structural design. Calculation methods |
| I.S. EN 1995-1-1:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| I.S. EN 752:2017 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| DIN EN 16582-2 E : 2015 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| I.S. EN 13670:2009 | EXECUTION OF CONCRETE STRUCTURES |
| I.S. EN 1997-2:2007 | EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING |
| DIN EN 14490:2010-11 | Execution of special geotechnical works - Soil nailing |
| ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| ISO 10467:2004 | Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| 12/30260570 DC : 0 | BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| 08/30181655 DC : DRAFT SEP 2008 | BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| DIN EN 15528 E : 2016 | RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE |
| I.S. EN 1998-4:2006 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 4: SILOS, TANKS AND PIPELINES |
| 16/30340644 DC : 0 | BS EN 1993-4-1:2007 AMD 1:2016 - EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 14/30298583 DC : 0 | BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| BS EN 15037-5:2013 | Precast concrete products. Beam-and-block floor systems Lightweight blocks for simple formwork |
| I.S. EN 1995-1-2:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
| 12/30259223 DC : 0 | BS EN 13200-6 - SPECTATOR FACILITIES - PART 6: DEMOUNTABLE (TEMPORARY) STANDS |
| PD IEC/TR 60865-2:2015 | Short-circuit currents. Calculation of effects Examples of calculation |
| 16/30340647 DC : 0 | BS EN 1993-4-2:2007 AMD 1:2016 - EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
| 11/30250535 DC : DRAFT DEC 2011 | BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| 10/30231844 DC : DRAFT SEP 2010 | BS EN 13225 - PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS |
| 13/30279620 DC : 0 | BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| DIN EN 15258:2009-05 | PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS |
| DIN EN 1993-4-2:2017-09 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
| 17/30341013 DC : DRAFT AUG 2017 | BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| DIN EN 15528:2016-01 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
| DIN EN 15258 E : 2009 | PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS |
| 15/30325882 DC : 0 | BS EN 16932-1 - DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 22282-1 : 2012 | GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES |
| I.S. EN 1999-1-5:2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 22282-1:2012-09 | Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012) |
| BS EN 15258:2008 | Precast concrete products. Retaining wall elements |
| PREN 50583 : DRAFT 2012 | PHOTOVOLTAICS IN BUILDINGS |
| DIN EN 14509 E : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| BS EN 13001-3-2:2014 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| UNE-EN 15037-1:2010 | Precast concrete products - Beam-and-block floor systems - Part 1: Beams |
| BS EN 12811-4:2013 | Temporary works equipment Protection fans for scaffolds. Performance requirements and product design |
| BS EN 15898:2011 | Conservation of cultural property. Main general terms and definitions |
| 05/19988811 DC : 0 | BS EN 15258 - PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS |
| 16/30343625 DC : 0 | BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| DIN EN 15037-5:2013-08 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK |
| ANEP-77 : 2017 | NAVAL SHIP CODE |
| 07/30152878 DC : DRAFT AUG 2007 | BS EN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
| DIN EN 15512 E : 2010 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| UNE-EN 1992-3:2011 | Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures |
| DIN EN 14490 E : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| DIN EN 1992-1-2:2010-12 | Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
| BS EN 15528:2015 | Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure |
| BS EN 1993-1-6 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES |
| UNE-EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
| UNE-EN 1995-1-2:2016 | Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design. |
| ISO 2394:2015 | General principles on reliability for structures |
| S.R. CEN/TR 16886:2016 | GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS |
| S.R. CEN/TR 15728:2016 | DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS |
| ISO 12122-6:2017 | Timber structures — Determination of characteristic values — Part 6: Large components and assemblies |
| 15/30326160 DC : 0 | BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS |
| UNI EN 14490 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| I.S. EN 15037-5:2013 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK |
| UNE-EN 1998-2:2012 | Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges |
| 14/30297831 DC : 0 | BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNE-EN 1794-1:2011 | Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements |
| 17/30357806 DC : 0 | BS EN 17121 - CONSERVATION OF CULTURAL HERITAGE - HISTORIC TIMBER STRUCTURES - GUIDELINES FOR THE ON SITE ASSESSMENT |
| 15/30304281 DC : 0 | BS EN 16727-2-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 2-1: MECHANICAL PERFORMANCE UNDER DYNAMIC LOADINGS DUE TO PASSING TRAINS - RESISTANCE TO FATIGUE |
| 17/30359261 DC : 0 | BS EN 13200-6 - SPECTATOR FACILITIES - PART 6: DEMOUNTABLE STANDS |
| 18/30365845 DC : 0 | BS EN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| 17/30366771 DC : 0 | BS EN 13495 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) (FOAM BLOCK TEST) |
| PREN 13031-1 : DRAFT 2017 | GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES |
| DIN EN 1991-1-5:2010-12 | Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions (includes Corrigendum AC:2009) |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| I.S. EN 1992-1-2:2005 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
| PREN 1992-4 : DRAFT 2013 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| ISO 28278-2:2010 | Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules |
| I.S. EN 14490:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| I.S. EN 15528:2015 | RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE |
| ISO 22111:2007 | Bases for design of structures General requirements |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| IEC 60913:2013 | Railway applications - Fixed installations - Electric traction overhead contact lines |
| EN 1999-1-5:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| DIN EN 1998-1:2010-12 | Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings (includes Corrigendum AC:2009) |
| DIN EN 13693:2009-10 | Precast concrete products - Special roof elements (includes Amendment A1:2009) |
| DIN EN 1991-4:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS |
| DIN EN 1995-2:2010-12 | Eurocode 5: Design of timber structures - Part 2: Bridges |
| DIN EN 14475 E : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| DIN EN 1991-1-1:2010-12 | Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings (includes Corrigendum AC:2009) |
| DIN EN 1997-2:2010-10 | Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing (includes Corrigendum AC:2010) |
| DIN EN 1991-3:2010-12 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| DIN EN 40-3-2:2013-06 | LIGHTING COLUMNS - PART 3-2: DESIGN AND VERIFICATION - VERIFICATION BY TESTING |
| DIN EN 1998-3:2010-12 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 3: ASSESSMENT AND RETROFITTING OF BUILDINGS |
| BS EN 1993-6:2007 | Eurocode 3. Design of steel structures Crane supporting structures |
| BS EN 13001-2:2014 | Crane safety. General design Load actions |
| BS EN 1991-1-3 : 2003 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
| BS EN 1992-1-2:2004 | Eurocode 2. Design of concrete structures General rules - Structural fire design |
| ISO 22282-1:2012 | Geotechnical investigation and testing — Geohydraulic testing — Part 1: General rules |
| BS EN 13782:2015 | Temporary structure. Tents. Safety |
| UNE-EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| BS EN 1991-1-1:2002 | Eurocode 1. Actions on structures General actions - Densities, self-weight, imposed loads for buildings |
| DIN EN 14991:2007-07 | Precast concrete products - Foundation elements |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| BS EN 13107:2015 | Safety requirements for cableway installations designed to carry persons. Civil engineering works |
| BS EN 12843:2004 | Precast concrete products. Masts and poles |
| BS EN 1994-2:2005 | Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges |
| BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
| BS EN 13200-5:2006 | Spectator facilities Telescopic stands |
| BS EN 1996-1-2:2005 | Eurocode 6. Design of masonry structures General rules. Structural fire design |
| UNE-EN 1538:2011 | Execution of special geotechnical work - Diaphragm walls |
| I.S. EN 50119:2020 | Railway applications - Fixed installations - Electric traction overhead contact lines |
| 15/30324856 DC : 0 | BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| BS EN 1991-1-5:2003 | Eurocode 1. Actions on structures General actions - Thermal actions |
| UNE-EN 13001-2:2015 | Crane safety - General design - Part 2: Load actions |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| BS EN 12812:2008 | Falsework. Performance requirements and general design |
| BS EN 1993-1-9:2005 | Eurocode 3. Design of steel structures Fatigue |
| BS EN 13084-8:2005 | Free-standing industrial chimneys Design and execution of mast construction with satellite components |
| BS EN 1998-3:2005 | Eurocode 8. Design of structures for earthquake resistance Assessment and retrofitting of buildings |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| BS EN 1337-6:2004 | Structural bearings Rocker bearings |
| UNE-EN 1991-4:2011 | Eurocode 1 - Actions on structures - Part 4: Silos and tanks |
| UNE-EN 13782:2016 | Temporary structure - Tents - Safety |
| BS EN 1995-1-2:2004 | Eurocode 5. Design of timber structures General - Structural fire design |
| UNE-EN 1995-1-1:2016 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings. |
| UNE-EN 15898:2012 | Conservation of cultural property - Main general terms and definitions |
| UNE-EN 14475:2011 | Execution of special geotechnical works - Reinforced fill |
| BS EN 1996-1-1 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS EN 1069-1:2017 | Water slides Safety requirements and test methods |
| BS EN 1337-3:2005 | Structural bearings Elastomeric bearings |
| ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
| BS EN 1536 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES |
| BS EN 1991-4:2006 | Eurocode 1. Actions on structures Silos and tanks |
| BS EN 1998-1 : 2004 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS |
| BS EN 1991-1-4 : 2005 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| BS EN 14250:2010 | Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| 17/30326406 DC : 0 | BS EN 17168 - RAILWAY APPLICATIONS - PLATFORM BARRIER SYSTEMS |
| BS EN 13374 : 2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| BS EN 1994-1-2 : 2005 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNE-EN 13693:2005 | Precast concrete products - Special roof elements |
| BS EN 1994-1-1:2004 | Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings |
| ISO/TS 20656-1:2017 | Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes |
| BS EN 13830:2015 | Curtain walling. Product standard |
| UNE-EN 15037-3:2010 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| BS EN 1992-3:2006 | Eurocode 2. Design of concrete structures Liquid retaining and containing structures |
| UNE-EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
| BS EN 13500:2003 | Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on mineral wool. Specification |
| UNE-EN 13670:2013 | Execution of concrete structures |
| UNE-EN 12368:2015 | Traffic control equipment - Signal heads |
| EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| BS EN 1991-1-6:2005 | Eurocode 1. Actions on structures General actions. Actions during execution |
| BS EN 1998-5:2004 | Eurocode 8. Design of structures for earthquake resistance Foundations, retaining structures and geotechnical aspects |
| UNE-EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
| BS EN 1998-4:2006 | Eurocode 8. Design of structures for earthquake resistance Silos, tanks and pipelines |
| BS EN 13084-1:2007 | Free-standing chimneys General requirements |
| EN 1992-1-2:2004/AC:2008 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 16382:2016 | Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation products |
| EN 1998-4:2006 | Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines |
| EN 1536:2010+A1:2015 | Execution of special geotechnical work - Bored piles |
| EN 1538:2010+A1:2015 | Execution of special geotechnical work - Diaphragm walls |
| EN 1994-1-1:2004/AC:2009 | EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| EN 14731:2005 | Execution of special geotechnical works - Ground treatment by deep vibration |
| EN 14991 : 2007 | PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
| EN 16481:2014 | Timber stairs - Structural design - Calculation methods |
| EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| EN 1996-3:2006/AC:2009 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES |
| EN 16582-3:2015 | Domestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN ISO 22282-1:2012 | Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012) |
| EN 1994-2:2005/AC:2008 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN 14490:2010 | Execution of special geotechnical works - Soil nailing |
| EN 1992-3:2006 | Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures |
| EN 1998-2:2005/A2:2011 | EUROCODE 8 - DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 2: BRIDGES |
| EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 16432-1:2017 | Railway applications - Ballastless track systems - Part 1: General requirements |
| EN 1998-6:2005 | Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys |
| EN 1537:2013 | Execution of special geotechnical works - Ground anchors |
| EN 1997-1:2004/A1:2013 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
| EN 1998-5:2004 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 5: FOUNDATIONS, RETAINING STRUCTURES AND GEOTECHNICAL ASPECTS |
| EN 13782:2015 | Temporary structure - Tents - Safety |
| EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
| EN 15037-4:2010+A1:2013 | Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks |
| EN 1996-2:2006/AC:2009 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
| EN 1993-4-3:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES |
| EN 1991-1-7:2006/A1:2014 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS |
| EN 13693:2004+A1:2009 | Precast concrete products - Special roof elements |
| EN 15037-5:2013 | Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork |
| EN 1991-1-4:2005/A1:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements |
| EN 1991-1-6:2005/AC:2013 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution |
| EN 15037-3:2009+A1:2011 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| EN 15898:2011 | Conservation of cultural property - Main general terms and definitions |
| EN 1991-3:2006/AC:2012 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY |
| EN 1995-1-2:2004/AC:2009 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
| EN 1999-1-2:2007/AC:2009 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
| EN 1991-1-3:2003/A1:2015 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
| EN 1997-2:2007/AC:2010 | EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING |
| EN 1993-1-9:2005/AC:2009 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE |
| EN 1993-6:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES |
| EN 1991-4:2006/AC:2012 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 4: SILOS AND TANKS |
| EN 1991-1-5:2003/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS |
| EN 15037-1:2008 | Precast concrete products - Beam-and-block floor systems - Part 1: Beams |
| EN 1992-1-1:2004/A1:2014 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| EN 1991-2:2003/AC:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 2: TRAFFIC LOADS ON BRIDGES |
| EN 13670:2009 | Execution of concrete structures |
| EN 14475:2006/AC:2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
| EN 1991-1-2:2002/AC:2013 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
| EN 14199:2015 | Execution of special geotechnical works - Micropiles |
| EN 16927:2017 | Mini-pools - Specific requirements including safety and test methods for mini-pools |
| EN 40-3-1:2013 | Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads |
| EN 1994-1-2:2005/A1:2014 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 40-3-2:2013 | Lighting columns - Part 3-2: Design and verification - Verification by testing |
| EN 1996-1-2:2005/AC:2010 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 1998-3:2005/AC:2013 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 3: ASSESSMENT AND RETROFITTING OF BUILDINGS |
| EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| PREN 50341-1 : DRAFT 2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| DIN EN 16582-2:2015-11 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
| I.S. EN 15129:2009 | ANTI-SEISMIC DEVICES |
| 15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| UNE-EN 1998-5:2011 | Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects |
| UNE-EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| BS EN 16432-1:2017 | Railway applications. Ballastless track systems General requirements |
| 12/30259982 DC : 0 | BS EN 16432-1 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 1991-1-1:2002 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX:2013) |
| 13/30279626 DC : 0 | BS EN 16582-3 - DOMESTIC SWIMMING POOLS - PART 3: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR ABOVEGROUND POOLS |
| DIN EN 12811-4 E : 2014 | TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| BS EN 16382:2016 | Thermal insulation products for building applications. Determination of the pull-through resistance of plate anchors through thermal insulation products |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| BS EN 1993-4-1 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
| UNE-EN 1993-1-9:2013 | Eurocode 3: Design of steel structures - Part 1-9: Fatigue |
| UNE-EN 1993-1-2:2016 | Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design |
| 15/30304269 DC : 0 | BS EN 16727-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE UNDER STATIC LOADINGS - CALCULATION AND TEST METHODS |
| S.R. CEN/TR 1317-6:2012 | ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
| PREN 1337-3 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
| DIN EN 15644:2009-03 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 07/30151256 DC : 0 | BS EN 13670 - EXECUTION OF CONCRETE STRUCTURES |
| 15/30325361 DC : 0 | BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 1993-1-4:2012 | Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels |
| PREN 1538 : DRAFT 2008 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS |
| I.S. EN 1993-4-2:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-2: TANKS |
| DIN EN 12811-4:2014-03 | TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN |
| BS EN 16582-2:2015 | Domestic swimming pools Specific requirements including safety and test methods for inground pools |
| PD CEN/TR 16886:2016 | Guidance on the application of statistical methods for determining the properties of masonry products |
| 13/30280740 DC : 0 | BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES |
| 08/30188907 DC : DRAFT SEP 2008 | BS EN 1317-6 - ROAD RESTRAINT SYSTEMS - PEDESTRIAN RESTRAINT SYSTEMS - PART 6: PEDESTRIAN PARAPET |
| BS EN 16582-3:2015 | Domestic swimming pools Specific requirements including safety and test methods for aboveground pools |
| BS EN 15512:2009 | Steel static storage systems. Adjustable pallet racking systems. Principles for structural design |
| EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| ISO 11336-1:2012 | Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings |
| PREN 13791 : DRAFT 2017 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| UNI EN 15258 : 2009 | PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS |
| DIN EN 15512:2010-09 | Steel static storage systems - Adjustable pallet racking systems - Principles for structural design |
| DIN EN 1993-4-1:2017-09 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
| UNE-EN 1996-1-1:2011 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| DIN EN 15129 E : 2010 | ANTI-SEISMIC DEVICES |
| BS ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| DIN EN 1999-1-2:2010-12 | Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design (includes Corrigendum AC:2009) |
| 08/30171383 DC : DRAFT JUNE 2008 | BS EN 12871 - WOOD-BASED PANELS - PERFORMANCE SPECIFICATIONS AND REQUIREMENTS FOR LOAD BEARING BOARDS FOR USE IN FLOORS, WALLS AND ROOFS |
| I.S. EN 13374:2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| UNE-EN 1993-1-6:2013 | Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures |
| BS ISO 16488:2015 | Marine finfish farms. Open net cage. Design and operation |
| UNE-EN 15037-5:2013 | Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| DD CEN/TS 13001-3-2:2004 | Cranes. General design Limit states and proof of competence of wire ropes in reeving systems |
| NF EN 15129 : 2010 | ANTI-SEISMIC DEVICES |
| UNE-EN 12811-4:2015 | Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design |
| BS EN 1999-1-5:2007 | Eurocode 9. Design of aluminium structures Shell structures |
| 06/30151880 DC : 0 | BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| I.S. CEN TS 13001-3-1:2005 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| UNI EN 13670 : 2010 | EXECUTION OF CONCRETE STRUCTURES |
| I.S. EN 16432-1:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEN/TR 1295-4:2015 | Structural design of buried pipelines under various conditions of loading - Part 4: Parameters for reliability of the design |
| S.R. CEN TS 13001-3-2:2008 | CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS |
| DIN EN 16582-1:2015-11 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| UNE-EN 14490:2013 | Execution of special geotechnical works - Soil nailing |
| PREN 15129 : DRAFT 2017 | ANTI-SEISMIC DEVICES |
| PREN 1069-1 : DRAFT 2015 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNI EN 16481 : 2014 | TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS |
| UNE-EN 15037-4:2010 | Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks |
| I.S. EN 16382:2016 | THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-THROUGH RESISTANCE OF PLATE ANCHORS THROUGH THERMAL INSULATION PRODUCTS |
| UNE-EN 1994-1-2:2016 | Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design. |
| I.S. EN 1090-1:2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15037-3:2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| S.R. CEN/TR 1295-4:2015 | STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 4: PARAMETERS FOR RELIABILITY OF THE DESIGN |
| I.S. CEN TR 14862:2005 | PRECAST CONCRETE PRODUCTS - FULL-SCALE TESTING REQUIREMENTS IN STANDARDS ON PRECAST CONCRETE PRODUCTS |
| EN 13374:2013 | TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
| S.R. CEN/TR 16949:2016 | ROAD RESTRAINT SYSTEM - PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS |
| I.S. EN 15258:2008 | PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS |
| BS EN 15037-4 : 2010 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| I.S. EN 50583-1:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES |
| BS EN 115-1:2017 | Safety of escalators and moving walks Construction and installation |
| PREN 16612 : DRAFT 2017 | GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
| I.S. EN 50583-2:2016 | PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS |
| UNE-EN 1995-2:2016 | Eurocode 5: Design of timber structures - Part 2: Bridges |
| 17/30354665 DC : 0 | BS EN 13031-1 - GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES |
| UNE-EN 1991-1-6:2018 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution. |
| 14/30300917 DC : 0 | BS EN 16759 - STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS) |
| UNE-EN 16927:2017 | Mini-pools - Specific requirements including safety and test methods for mini-pools |
| XP CEN/TS 1992-4-1 : 2009 XP | DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNE-EN 1998-3:2012 | Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings |
| EN 1794-1:2018 | Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements |
| DIN EN 16927:2015-10 (Draft) | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| UNE-EN 16582-3:2015 | Domestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools |
| EN 13369:2018 | Common rules for precast concrete products |
| DIN EN 1991-1-3:2010-12 | Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads (includes Corrigendum AC:2009) |
| I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| UNI EN 15898 : 2012 | CONSERVATION OF CULTURAL PROPERTY - MAIN GENERAL TERMS AND DEFINITIONS |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| EN 1999-1-4:2007/A1:2011 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| UNE-EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
| DIN EN 40-3-1:2013-06 | LIGHTING COLUMNS - PART 3-1: DESIGN AND VERIFICATION - SPECIFICATION FOR CHARACTERISTIC LOADS |
| DIN EN 1994-1-2:2010-12 | Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
| DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| DIN EN 1993-1-10:2010-12 | Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties (includes Corrigendum AC:2009) |
| DIN EN 1995-1-1 E : 2010 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| DIN EN 13224:2012-01 | Precast concrete products - Ribbed floor elements |
| DIN EN 13001-2:2014-12 | Crane safety - General design - Part 2: Load actions |
| DIN EN 1337-6 E : 2004 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| BS EN 1993-1-2:2005 | Eurocode 3. Design of steel structures General rules - Structural fire design |
| BS EN 1997-2:2007 | Eurocode 7. Geotechnical design Ground investigation and testing |
| BS EN 13224:2011 | Precast concrete products. Ribbed floor elements |
| UNE-EN 40-3-1:2013 | Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads |
| UNE-EN 1536:2011 | Execution of special geotechnical work - Bored piles |
| 10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN 1997-1 : 2004 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| BS EN 1337-4:2004 | Structural bearings Roller bearings |
| BS EN 13693 : 2004 | PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
| BS EN 14199:2015 | Execution of special geotechnical works. Micropiles |
| BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
| BS EN 1537:2013 | Execution of special geotechnical works. Ground anchors |
| UNI EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 12811-4:2013 | Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design |
| DIN EN 14731:2005-12 | Execution of special geotechnical works - Ground treatment by deep vibration |
| EN 13200-5:2006 | Spectator facilities - Part 5: Telescopic stands |
| CEN/TS 13001-3-2:2008 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| EN 50583-1:2016 | Photovoltaics in buildings - Part 1: BIPV modules |
| DIN EN 1999-1-5:2017-03 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| DIN EN 1995-1-2:2010-12 | Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009) |
| DIN EN 16432-1:2017-09 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN 13084-1:2007 | Free-standing chimneys - Part 1: General requirements |
| I.S. EN 1998-1:2005 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS |
| EN 1337-3:2005 | Structural bearings - Part 3: Elastomeric bearings |
| DIN EN 1998-6:2006-03 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS |
| EN 12699:2015 | Execution of special geotechnical works - Displacement piles |
| DIN EN 1993-5:2010-12 | Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009) |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| EN 13084-8:2005 | Free-standing industrial chimneys - Part 8: Design and execution of mast construction with satellite components |
| DIN EN 1090-1:2012-02 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components (includes Amendment A1:2011) |
| DIN EN 1998-5:2010-12 | Eurocode 8: Design of structures for earthquake resistance - Part 5: Foundations, retaining structures and geotechnical aspects |
| DIN EN 1998-2:2011-12 | Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges (includes Amendment A1:2009 + A2:2011 + Corrigendum AC:2010) |
| EN 13001-3-2:2014 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| DIN EN 1991-2:2010-12 | Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges (includes Corrigendum AC:2010) |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| UNE-EN 13451-1:2012 | Swimming pool equipment - Part 1: General safety requirements and test methods |
| ISO 2631:1978 | Guide for the evaluation of human exposure to whole-body vibration |
| ISO 6707-1:2017 | Buildings and civil engineering works Vocabulary Part 1: General terms |
| ISO 2394:2015 | General principles on reliability for structures |
| ISO 3898:2013 | Bases for design of structures — Names and symbols of physical quantities and generic quantities |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 10137:2007 | Bases for design of structures - Serviceability of buildings and walkways against vibrations |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 8930:1987 | General principles on reliability for structures List of equivalent terms |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.