Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1993-1-8:2005/AC:2009

Current
Current

The latest, up-to-date edition.

EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
Published date

29-07-2009

1 Introduction
  1.1 Scope
  1.2 Normative references
  1.3 Distinction between Principles and Application Rules
  1.4 Terms and definitions
  1.5 Symbols
2 Basis of design
  2.1 Assumptions
  2.2 General requirements
  2.3 Applied forces and moments
  2.4 Resistance of joints
  2.5 Design assumptions
  2.6 Joints loaded in shear subject to impact, vibration
       and/or load reversal
  2.7 Eccentricity at intersections
3 Connections made with bolts, rivets or pins
  3.1 Bolts, nuts and washers
       3.1.1 General
       3.1.2 Preloaded bolts
  3.2 Rivets
  3.3 Anchor bolts
  3.4 Categories of bolted connections
       3.4.1 Shear connections
       3.4.2 Tension connections
  3.5 Positioning of holes for bolts and rivets
  3.6 Design resistance of individual fasteners
       3.6.1 Bolts and rivets
       3.6.2 Injection bolts
  3.7 Group of fasteners
  3.8 Long joints
  3.9 Slip-resistant connections using 8.8 or 10.9 bolts
       3.9.1 Design Slip resistance
       3.9.2 Combined tension and shear
       3.9.3 Hybrid connections
  3.10 Deductions for fastener holes
       3.10.1 General
       3.10.2 Design for block tearing
       3.10.3 Angles connected by one leg and other
              unsymmetrically connected members in tension
       3.10.4 Lug angles
  3.11 Prying forces
  3.12 Distribution of forces between fasteners at the
       ultimate limit state
  3.13 Connections made with pins
       3.13.1 General
       3.13.2 Design of pins
4 Welded connections
  4.1 General
  4.2 Welding consumables
  4.3 Geometry and dimensions
       4.3.1 Type of weld
       4.3.2 Fillet welds
       4.3.3 Fillet welds all round
       4.3.4 Butt welds
       4.3.5 Plug welds
       4.3.6 Flare groove welds
  4.4 Welds with packings
  4.5 Design resistance of a fillet weld
       4.5.1 Length of welds
       4.5.2 Effective throat thickness
       4.5.3 Design Resistance of fillet welds
  4.6 Design resistance of fillet welds all round
  4.7 Design resistance of butt welds
       4.7.1 Full penetration butt welds
       4.7.2 Partial penetration butt welds
       4.7.3 T-butt joints
  4.8 Design resistance of plug welds
  4.9 Distribution of forces
  4.10 Connections to unstiffened flanges
  4.11 Long joints
  4.12 Eccentrically loaded single fillet or single-sided
       partial penetration butt welds
  4.13 Angles connected by one leg
  4.14 Welding in cold-formed zones
5 Analysis, classification and modelling
  5.1 Global analysis
       5.1.1 General
       5.1.2 Elastic global analysis
       5.1.3 Rigid-plastic global analysis
       5.1.4 Elastic- plastic global analysis
       5.1.5 Global analysis of lattice girders
  5.2 Classification of joints
       5.2.1 General
       5.2.2 Classification by stiffness
       5.2.3 Classification by strength
  5.3 Modelling of beam-to-column joints
6 Structural joints connecting H or I sections
  6.1 General
       6.1.1 Basis
       6.1.2 Structural properties
       6.1.3 Basic components of a joint
  6.2 Design Resistance
       6.2.1 Internal forces
       6.2.2 Shear forces
       6.2.3 Bending moments
       6.2.4 Equivalent T-stub in tension
       6.2.5 Equivalent T-stub in compression
       6.2.6 Design Resistance of basic components
       6.2.7 Design moment resistance of beam-to-column
              joints and splices
       6.2.8 Design resistance of column bases with base plates
  6.3 Rotational stiffness
       6.3.1 Basic model
       6.3.2 Stiffness coefficients for basic joint components
       6.3.3 End-plate joints with two or more bolt-rows in tension
       6.3.4 Column bases
  6.4 Rotation capacity
       6.4.1 General
       6.4.2 Bolted joints
       6.4.3 Welded Joints
7 Hollow section joints
  7.1 General
       7.1.1 Scope
       7.1.2 Field of application
  7.2 Design
       7.2.1 General
       7.2.2 Failure modes for hollow section joints
  7.3 Welds
       7.3.1 Design resistance
  7.4 Welded joints between CHS members
       7.4.1 General
       7.4.2 Uniplanar joints
       7.4.3 Multiplanar joints
  7.5 Welded joints between CHS or RHS brace members and
       RHS chord members
       7.5.1 General
       7.5.2 Uniplanar joints
       7.5.3 Multiplanar joints
  7.6 Welded joints between CHS or RHS brace members and
       I or H section chords
  7.7 Welded joints between CHS or RHS brace members and
       channel section chord members

Provides design methods for the design of joints subject to predominantly static loading using steel grades S235, S275, S355, S420, S450 and S460.

Committee
CEN/TC 250
DevelopmentNote
Supersedes ENV 1993-1.1 (05/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

UNE-EN 50341-1:2017 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
11/30247279 DC : 0 BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL
I.S. EN 1993-5:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX)
14/30304786 DC : 0 BS EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
I.S. EN 1993-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
11/30249851 DC : 0 BS ISO 14346 - WELDING - STATIC DESIGN PROCEDURE FOR HOLLOW SECTION JOINTS
16/30332611 DC : DRAFT JAN 2016 BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
UNE-EN 1993-1-7:2013 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
PREN 14399-8 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
UNE-EN 1994-1-1:2013 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
BS EN 14399-7:2007 High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies
S.R. CEN TS 1992-4-1:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
UNE-EN 1998-1:2011 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
BS EN 13001-3-1 : 2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
EN 14399-8:2007 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
DD CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete General
13/30286967 DC : 0 BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
UNI EN 13001-3-1 : 2013 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
UNE-EN 15048-2:2017 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
UNI EN 14399-9 : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
UNI EN 14399-7 : 2008 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements
EN 1998-1:2004/A1:2013 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
DIN EN 1993-1-2:2010-12 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009)
DIN EN 1994-1-1:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
BS EN 1993-1-7:2007 Eurocode 3. Design of steel structures Plated structures subject to out of plane loading
14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
BS EN 1993-1-4 : 2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
BS EN 1993-5:2007 Eurocode 3. Design of steel structures Piling
DIN EN 1993-6:2010-12 Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009)
CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General
CEN/TR 15728:2016 Design and use of inserts for lifting and handling of precast concrete elements
EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 14399-8:2008-03 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 14346:2013 Static design procedure for welded hollow-section joints — Recommendations
I.S. EN 1998-6:2005 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS
DIN EN 14399-10:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
07/30107797 DC : 0 BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS
07/30166055 DC : 0 BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
PREN 10219-1 : DRAFT 2016 COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
UNI CEN/TS 1992-4-1 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
DIN EN 14399-8:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
I.S. EN 14399-10:2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
UNE-EN 14399-4:2016 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
UNE-EN 1994-2:2013 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
I.S. EN 15048-1:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
PREN 14399-10 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
UNE-EN 15048-1:2018 Non-preloaded structural bolting assemblies - Part 1: General requirements
UNI EN 14399-10 : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
UNE-EN 1993-1-3:2012 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 14399-10:2018 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
DIN EN 1993-4-3:2010-12 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
DIN EN 1993-1-3:2010-12 Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009)
BS EN 15048-1:2007 Non-preloaded structural bolting assemblies General requirements
I.S. EN 14399-3:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN 14399-4:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN 1993-1-4:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1994-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1993-4-3:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
I.S. EN 1994-1-1:2005 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 15048-2:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
DIN EN 14399-3:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 1993-1-7:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING (INCLUDING IRISH NATIONAL ANNEX)
UNI EN 1993-1-7 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
BS EN 14399-8:2007 High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut assemblies
PREN 14399-9 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
PD CEN/TR 15728:2016 Design and use of inserts for lifting and handling of precast concrete elements
BS PP1990(2004) : 2004 GUIDE TO THE STRUCTURAL EUROCODES FOR STUDENTS OF STRUCTURAL DESIGN
15/30332551 DC : 0 BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
EN 14399-7:2007 High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
DIN EN 14399-7:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 1993-4-1:2007/A1:2017 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
I.S. EN 1993-4-1:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
EN 1993-1-4:2006/A1:2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 1993-1-7:2010-12 Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading (includes Corrigendum AC:2009)
DIN EN 1993-1-4:2015-10 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 1994-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008)
BS EN 1998-6:2005 Eurocode 8. Design of structures for earthquake resistance Towers, masts and chimneys
BS EN 1993-4-3:2007 Eurocode 3. Design of steel structures Pipelines
BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-5:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-5 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNI EN 1994-2 : 2006 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
UNI EN 1993-4-3 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNI EN 1993-1-2 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1993-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
UNI EN 1994-1-1 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
ISO 17842-1:2015 Safety of amusement rides and amusement devices — Part 1: Design and manufacture
15/30332548 DC : 0 BS EN 14399-8 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
I.S. EN 1993-1-3:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING (INCLUDING IRISH NATIONAL ANNEX)
12/30260570 DC : 0 BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
DIN EN 14399-10 E : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
PREN 15048-2 : DRAFT 2014 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
DIN EN 14399-9:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
S.R. CEN/TR 15728:2016 DESIGN AND USE OF INSERTS FOR LIFTING AND HANDLING OF PRECAST CONCRETE ELEMENTS
I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 14399-10:2009 High-strength structural bolting assemblies for preloading System HRC. Bolt and nut assemblies with calibrated preload
PREN 1992-4 : DRAFT 2013 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
DIN EN 1998-1:2010-12 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings (includes Corrigendum AC:2009)
DIN EN 15048-1:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
DIN EN 15048-2:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
BS EN 1993-6:2007 Eurocode 3. Design of steel structures Crane supporting structures
BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut assemblies
BS EN 1994-2:2005 Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges
BS EN 15048-2:2007 Non-preloaded structural bolting assemblies Suitability test
BS EN 1998-1 : 2004 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
BS EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings
BS EN 14399-4:2005 High-strength structural bolting assemblies for preloading System HV. Hexagon bolt and nut assemblies
EN 1994-1-1:2004/AC:2009 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1994-2:2005/AC:2008 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES
EN 1993-1-3:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
EN 14399-9:2018 High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
EN 1998-6:2005 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
EN 1993-4-3:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
EN 1993-1-7:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING
EN 1993-6:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
EN 14399-4:2015 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
EN 14399-3:2015 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
PREN 50341-1 : DRAFT 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
BS EN 1993-4-1 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
UNE-EN 1993-1-2:2016 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
15/30332545 DC : 0 BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNE-EN 1993-1-4:2012 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
DIN EN 1993-4-1:2017-09 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS
15/30332554 DC : 0 BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
BS ISO 14346:2013 Static design procedure for welded hollow-section joints. Recommendations
UNE-EN 14399-3:2016 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
PREN 14399-7 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 14399-7:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 13001-3-1:2013-12 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
UNI EN 14399-8 : 2008 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
BS EN 14399-9:2009 High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies
XP CEN/TS 1992-4-1 : 2009 XP DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN 14399-8:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
I.S. EN 14399-9:2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
DIN EN 14399-4:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures General rules - Structural fire design
BS ISO 17842-1:2015 Safety of amusement rides and amusement devices Design and manufacture
I.S. EN 1998-1:2005 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
DIN EN 1998-6:2006-03 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS
DIN EN 1993-5:2010-12 Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009)

EN ISO 4033:2012 Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN ISO 7091 : 2000 PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C
EN ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
EN 14399-3:2015 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 288-3:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS
ISO 4016:2011 Hexagon head bolts Product grade C
EN 10056-2:1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
ISO 4034:2012 Hexagon regular nuts (style 1) Product grade C
ISO 2320:2015 Fasteners Prevailing torque steel nuts Functional properties
EN ISO 7090 : 2000 PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000)
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
EN ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
EN 12345 : 1998 WELDING - MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS
EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
EN 20898-2 : 1993 MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992)
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10210-2:2006/AC:2007 HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
EN ISO 4034:2012/AC:2013 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
EN ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)
EN 14399-6:2015 High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: General requirements
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
EN 14399-4:2015 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
ISO 4033:2012 Hexagon high nuts (style 2) — Product grades A and B
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10025-6:2004+A1:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
EN 14399-5:2015 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN ISO 14555:2017 Welding - Arc stud welding of metallic materials (ISO 14555:2017)
EN ISO 7089 : 2000 PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)
EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 4014:2011 Hexagon head bolts Product grades A and B
ISO 4018:2011 Hexagon head screws Product grade C
ISO 1891:2009 Fasteners — Terminology

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more