EN 326-3:2003
Current
Current
The latest, up-to-date edition.
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
Published date
19-11-2003
Publisher
Foreword
1 Scope
2 Normative references
3 Symbol
3.1 Letter symbols (see also EN 326-1 and EN 326-2)
3.2 Indices (see also EN 326-1)
4 Terms and definitions
5 Verification of compliance
5.1 Inspection body
5.2 Sampling
5.2.1 Lot identification
5.2.2 Sampling of panels
5.3 Inspection by variables
5.3.1 Sampling and cutting of test pieces
5.3.2 Expression of test results
5.3.3 Evaluation of test results
5.4 Inspection by attributes
5.4.1 General
5.4.2 Single sampling plan
5.4.3 Double sampling plan
6 Inspection report
Bibliography
This European Standard specifies methods for the verification of compliance of one or more properties of an isolated lot of wood-based panels with the requirements of the relevant EN specification standards. Different sample sizes are given depending on wether or not the production is controlled according to EN 326-2.For panels, the production of which is controlled in accordance to EN 326-2 this European Standard can be used in case of a dispute. It is not applicable for the factory production control. For these purposes, EN 326-2 applies.In this standard, verification of compliance is based on the testing of small test pieces.
| Committee |
CEN/TC 112
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 326-3:2003 | Identical |
| NBN EN 326-3 : 2004 | Identical |
| NS EN 326-3 : 2ED 2004 | Identical |
| NEN EN 326-3 : 2003 | Identical |
| NF EN 326-3 : 2004 | Identical |
| UNI EN 326-3 : 2004 | Identical |
| UNE-EN 326-3:2004 | Identical |
| PN EN 326-3 : 2005 | Identical |
| DIN EN 326-3 E : 2004 | Identical |
| DIN EN 326-3:2004-02 | Identical |
| SN EN 326-3 : 2003 | Identical |
| I.S. EN 326-3:2003 | Identical |
| 04/30112438 DC : DRAFT APR 2004 | EN 622-5 - FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| 08/30181440 DC : DRAFT JULY 2008 | BS EN 622-4 - FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| 03/315086 DC : DRAFT SEP 2003 | EN 622-2 - FIBREBOARDS - SPECIFICATIONS - PART 2 - REQUIREMENTS FOR HARDBOARDS |
| 04/30113724 DC : DRAFT MAY 2004 | EN 300 - ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 622-4:2009 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| UNE-EN 622-4:2010 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| BS EN 300:2006 | Oriented strand boards (OSB). Definitions, classification and specifications |
| BS EN 14279 : 2004 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| BS EN 15197:2007 | Wood-based panels. Flaxboards. Specifications |
| BS EN 312:2010 | Particleboards. Specifications |
| DIN EN 634-2:2007-05 | CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERIOR CONDITIONS |
| EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
| CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics |
| CEN/TS 16368:2014 | Lightweight Particleboards - Specifications |
| 10/30234290 DC : 0 | BS EN 636 - PLYWOOD - SPECIFICATIONS |
| 12/30254092 DC : 0 | BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| 01/107952 DC : DRAFT NOV 2001 | PREN 14279 - LAMINATED VENEER TIMBER (LVL) - SPECIFICATIONS, DEFINITIONS, CLASSIFICATION AND REQUIREMENTS |
| 05/30132017 DC : DRAFT APR 2005 | BS EN 634-2 - CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS |
| PREN 636 : DRAFT 2010 | PLYWOOD - SPECIFICATIONS |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| DIN EN 622-5:2010-03 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| UNE-EN 622-5:2010 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| I.S. EN 13353:2008 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| I.S. EN 622-5:2009 | FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| I.S. EN 634-2:2007 | CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS |
| I.S. EN 300:2006 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 636:2012 | PLYWOOD - SPECIFICATIONS |
| I.S. EN 312:2010 | PARTICLEBOARDS - SPECIFICATIONS |
| I.S. EN 622-2:2004 | FIBREBOARDS - SPECIFICATIONS - REQUIREMENTS FOR HARDBOARDS |
| I.S. EN 14279:2005 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 622-3:2004 | FIBREBOARDS - SPECIFICATIONS - REQUIREMENTS FOR MEDIUM BOARDS |
| I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| PD CEN/TS 16368:2014 | Lightweight Particleboards. Specifications |
| 08/30181443 DC : DRAFT JULY 2008 | BS EN 622-5 - FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| 07/30160760 DC : 0 | BS EN 13353 - SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| S.R. CEN/TS 16368:2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| S.R. CEN/TS 16526:2013 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| UNI CEN/TS 16368 : 2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| NF EN 622-4 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| DIN EN 636:2015-05 | PLYWOOD - SPECIFICATIONS |
| DIN EN 622-3:2004-07 | Fibreboards - Specifications - Part 3: Requirements for medium board |
| BS EN 634-2:2007 | Cement-bonded particleboards. Specifications Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| EN 634-2:2007 | Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| UNI EN 622-4 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| UNI EN 312 : 2010 | PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 622-5 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI EN 13353 : 2011 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| UNI CEN/TS 16526 : 2014 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| UNI EN 622-2 : 2005 | FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS |
| UNI EN 14279 : 2009 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| 05/30132020 DC : DRAFT APR 2005 | BS EN 15197 - WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS |
| ISO 16894:2009 | Wood-based panels Oriented strand board (OSB) Definitions, classification and specifications |
| DIN EN 622-2:2004-07 | Fibreboards - Specifications - Part 2: Requirements for hardboards |
| DIN EN 300:2006-09 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| DIN EN 622-1:2003-09 | FIBREBOARDS - SPECIFICATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 13353 : 2008 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| BS EN 622-2:2004 | Fibreboards. Specifications Requirements for hardboards |
| BS EN 622-4:2009 | Fibreboards. Specifications Requirements for softboards |
| UNE-EN 13353:2009 | Solid wood panels (SWP) - Requirements |
| DIN EN 15197:2007-05 | Wood-based panels - Flaxboards - Specifications |
| BS EN 622-1:2003 | Fibreboards. Specifications General requirements |
| BS EN 634-1:1995 | Cement-bonded particle boards. Specification General requirements |
| UNE-EN 312:2010 | Particleboards - Specifications |
| BS EN 622-3:2004 | Fibreboards. Specifications Requirements for medium boards |
| DIN EN 15197 E : 2007 | WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 312:2010 | Particleboards - Specifications |
| EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
| EN 622-2:2004/AC:2005 | FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| 09/30202519 DC : 0 | BS EN 312 - PARTICLEBOARDS - SPECIFICATIONS |
| PD CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics |
| 01/103034 DC : DRAFT MAR 2001 | PREN 636-3 - PLYWOOD - SPECIFICATIONS - PART 3: REQUIREMENTS FOR PLYWOOD FOR USE IN EXTERIOR CONDITIONS |
| DIN EN 14279 E : 2009 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| DIN EN 326-2 E : 2000 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN 13353:2011-07 | Solid wood panels (SWP) - Requirements (includes Amendment A1:2011) |
| DIN EN 622-4:2010-03 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| BS EN 636 : 2012 | PLYWOOD - SPECIFICATIONS |
| BS EN 326-1:1994 | Wood-based panels. Sampling, cutting and inspection Sampling and cutting of test pieces and expression of test results |
| BS EN 622-5:2009 | Fibreboards. Specifications Requirements for dry process boards (MDF) |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN 312:2010-12 | Particleboards - Specifications |
| DIN EN 14279:2009-07 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| ISO 3951:1989 | Sampling procedures and charts for inspection by variables for percent nonconforming |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.